Whirlpool WFP2411GX Manual de Usario

Whirlpool Wasmachine WFP2411GX

Lee a continuación 📖 el manual en español para Whirlpool WFP2411GX (8 páginas) en la categoría Wasmachine. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

W11185673A

W11185678A - SP

PEDESTAL INSTALLATION INSTRUCTIONS

INSTRUCTIONS D’INSTALLATION DU PIÉDESTAL

Table of Contents

PEDESTAL SAFETY 1 .................................................................

INSTALLATION REQUIREMENTS 2 ..........................................

Tools and Parts 2 .....................................................................

Location Requirements 2..........................................................

Before Installing Your Pedestal ............................................. 2

INSTALLATION INSTRUCTIONS 3 ............................................

Install Pedestal ....................................................................... 3

Table des matières

SÉCURITÉ DU PIÉDESTAL ......................................................5

EXIGENCES D’INSTALLATION ................................................5

Outillage et pièces ...................................................................5

Exigences d’emplacement ......................................................6

Avant l’installation du piédestal ..............................................6

INSTRUCTIONS D’INSTALLATION .........................................7

Installation du piédestal ...........................................................7

PEDESTAL SAFETY

231/ "

255/ "

11 / "

237/ " 16

(595 mm)

265/ " 16

(668 mm)

115/ " 16

(287 mm)

Location Requirements

Parts supplied:

Remove parts from package. Check that all parts were included.

Metal pedestal

Tools required:

5/8" (16 mm) open-end

wrench (for bolts) and

11/16" (17 mm) open-end

wrench (for foot locknuts)

Level

Tools and Parts

Check that you have the tools and parts necessary

for correct installation.

INSTALLATION REQUIREMENTS

Bolts (4)

If the All-In-One Washer and Dryer with pedestal assembly

is located in a garage, 6" (152 mm) must be added under

the pedestal so that the All-In-One Washer and Dryer is 18"

(460 mm) above the garage oor. A separate riser, able to

support at least 275 lbs. (125 kg), may be required. The entire

pedestal must sit completely on the riser.

Before Installing Your Pedestal

IMPORTANT: If your All-In-One Washer and Dryer is already

installed, it must be uninstalled.

If you need to uninstall your All-In-One Washer and Dryer, see

the Installation Instructions that came with your model for tools

required.

Uninstalling Your All-In-One Washer and Dryer

1. Unplug the power supply cord.

2. Turn off the cold water faucet.

3. Slowly loosen the ll hose at the faucet to relieve the water

pressure. Use a sponge or towel to absorb the released water.

4. Pull the All-In-One Washer and Dryer away from the wall so

the pedestal can be placed in its nal location.

INSTALLATION INSTRUCTIONS

Install Pedestal

Follow these instructions to install the pedestal on the All-In-One

Washer and Dryer.

1. Lay the All-In-One Washer and Dryer on its side.

2. Remove the feet from the bottom of the All-In-One Washer

and Dryer.

3. Screw the feet into the bottom of the pedestal.

4. Screw the bolts into the bottom of the All-In-One Washer

and Dryer.

5. Slide the pedestal onto the All-In-One Washer and Dryer

by engaging the bolts in the slots located on the top of the

pedestal.

6. Stand the All-In-One Washer and Dryer up.

7. Use a 5/8" (16 mm) open-end wrench to completely

tighten the bolts.

8. With the All-In-One Washer and Dryer locked securely into

place on the pedestal, slide the All-In-One Washer and Dryer

with pedestal to its nal location.

Especificaciones del producto

Marca:	Whirlpool
Categoría:	Wasmachine
Modelo:	WFP2411GX
Peso.:	2700 g
Ancho:	482.6 mm
Profundidad:	177.8 mm
Altura:	25.4 mm
Puertos de entrada VGA (D-Sub):	1
Voltaje de entrada:	230 V
Relación señal-ruido:	73 dB
Puertos de salida RJ-45:	3
Banda-ancha:	330 MHz
Puertos de salida VGA (D-Sub):	12
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Nivel máximo de salida:	1.7 Vpp
Chaflán diferencial:	0.44 °
ganancia diferencial:	0.17 procent
factor K:	0.05 procent