Whirlpool WGD8120HW Manual de Usario

Whirlpool secadora WGD8120HW

Lee a continuación 📖 el manual en español para Whirlpool WGD8120HW (24 páginas) en la categoría secadora. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

QUICK REFERENCE GUIDE

WHIRLPOOL® ELECTRIC/GAS DRYER

WARNING:

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly could result in serious injury, death, or property

damage.

Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this

or any other appliance.

–

–WHAT TO DO IF YOU SMELL GAS:

•

Do not try to light any appliance.

•

Do not touch any electrical switch; do not use any phone in your building.

•

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s

instructions.

•

If you cannot reach your gas supplier, call the re department.

–Installation and service must be performed by a qualied installer, service agency, or

the gas supplier.

•

Clear the room, building, or area of all occupants.

W11175247B

5 56 4

1 32

CONTROL PANEL AND FEATURES

POWER

Touch to turn on/off or to stop/cancel a cycle.

WHAT TO DRY/HOW TO DRY

First select a cycle from the “What to Dry” and then select the

“How to Dry” to get the best combination cycle available for the

type of items you are going to dry. See “Cycle Guide” for cycle

details.

START/PAUSE

Touch and hold; cycle will start after countdown.

Touch START/PAUSE during a cycle to pause it. Touch again to

resume.

MODIFIERS (Not all cycles and options are available on all

models.)

NOTE: Dryer remembers the last completed cycle and cycle

settings. The next time you turn dryer on, it will be set to run the

last cycle.

Temp

Touch to modify the cycle’s available temperatures (Air Only,

Low, Medium, Medium High, High). Follow garment label

instructions for best results. Once a cycle has started, the

temperature can be changed within the ﬁrst 5-8 minutes.

Dryness

Touch to modify the cycle’s available dryness levels on the

sensor cycles (Less, Normal, More).

NOTE: Dryness is for use with Automatic Cycles only.

Wrinkle Shield™ Option

Touch to turn on/off and on with steam (select models). Wrinkle

Shield™ option adds up to 150 minutes of periodic tumbling and

heat to help reduce wrinkling. Wrinkle Shield™ option with steam

will add a short steam cycle after 60 minutes to help smooth

wrinkles.

CYCLE OPTIONS (Not all cycles and options are available on

all models.)

Use to select available modifiers for your dryer.

Remote Enable

Touch each time you want to remotely control via the Whirlpool®

app. Follow the instructions in the “GET THE WHIRLPOOL®

APP AND GET CONNECTED” section below for more details.

NOTE: Once Remote Enable has been selected, certain

interactions with the dryer will cause it to cancel Remote Enable.

Example: Opening the door.

Damp Dry Signal

Touch DAMP DRY SIGNAL or touch and hold DRUM LIGHT

(depending on the model) for at least 3 seconds to turn the

Damp Dry Signal on or off. You will get a sound and display

notiﬁcation as “Items are damp. You can pause and reposition

for best results”.

Drum Light

Touch to turn the drum light on/off.

Steam Options

Touch to add Steam and/or Reduce Static to selected cycle.

Steam option adds steam to the end of cycle to help smooth

wrinkle. Reduce Static will automatically tumble, pause and

introduce a small amount of moisture to the load to help reduce

static.

Steam Refresh (steam models only)

This cycle is best for reducing wrinkles from dry items. Cycle

time will increase, depending on number of items. This is an

independent cycle that cannot be combined with any other

cycle.

More Time/Less Time Timed Dry Adjust

Touch MORE TIME or LESS TIME with the Timed Dry/Quick

Dry cycle to increase or decrease the length of the cycle time.

EcoBoostTM Option

The EcoBoostTM option will default on only for the Regular/

Normal cycle and is only available on that cycle. This option

allows you to increase your energy savings by using a slightly

lower heat level. The EcoBoostTM option will increase drying

times by approximately 40 minutes, which will be reﬂected on

the LCD Display. If optimal time is desired, touch EcoBoost to

turn off this option.

Cycle Signal

Use this option to turn the signal indicating the end of a drying

cycle to Low, Medium, High, or Off.

NOTE: Press/hold Cycle Signal to select the volume.

Appearance may vary depending on model.

More Options

Touch to select your “Favorite cycle” (Only available for models

with WiFi capability).

Favorite cycle: You may create “custom” cycles in the app and

store one frequently-used or favorite cycle on the machine.

LCD DISPLAY

When you select a cycle, its default settings will display and

the Estimated Time Remaining (for Automatic Cycles) will vary

depending on “What to Dry” and “How to Dry” selections, or

actual time remaining for Timed Dry cycles (for Manual Cycles)

will be displayed.

CYCLE PHASE LABELS

Sensing

Displays during Sensor cycles to indicate that the moisture

sensor on the dryer is operating. It will not be displayed during

Timed/Quick Dry cycles or options such as Wrinkle Shield™

option.

Drying

Dryer is in the main dry phase of the automatic cycle.

Steaming

Steam option selected and Steam phase running.

Cool Down

The dryer has ﬁnished drying with heat and is now tumbling the

load without heat to cool it down.

Static Reduce

Reduce Static phase is running.

End

Display message will show “Drying is complete” and will time-

out after 5 minutes. This will indicate that the selected cycle has

ended and the load may be removed from the dryer. If Wrinkle

Shield™ option has been selected, the dryer may continue to

tumble the load, even if “End” is displayed.

Check Vent

The Check Vent alert is a feature available for Automatic cycles

only. This alert will show the status of airﬂow through the dryer

and the dryer vent system for the dryer’s life. During the sensing

phase at the beginning of the cycle if it detects a blocked vent or

low pressure it will display “Check vent. Clean lint screen or vent

for better performance.”

REMEMBER: Thedryer will continue to operate even when

check vent notiﬁcation is displayed, but poor airﬂow can impact

dry times and overall performance.

Display message can be cleared by pressing any key with the

exception of Power which will cancel the cycle.

GET THE WHIRLPOOL® APP AND GET CONNECTED

With your mobile device download the Whirlpool®

app. You can get subscription and connectivity

instructions, terms of use, and privacy policy at www.whirlpool.com/connect or in

Canada www.whirlpool.ca/connect.

Once installed, launch the app and you will be guided through the steps to subscribe and create your user account to connect to your

appliance. If you have any problems or questions, call Whirlpool ® Connected Appliances at . 1-866-333-4591

(Only available for models with WiFi capability).

CONNECTING UNIT

TO INTERNET

To connect your unit to the internet

please download the Whirlpool® app

and press .REMOTE ENABLE

ALLOWING REMOTE

CONTROL AND

INTERACTION

You must press REMOTE ENABLE

when connected in order to allow

remote control and interaction.

When unit is ﬁrst powered on, it will prompt to select language before you see message to Download APP or press any other key to setup

WiFi later.

Especificaciones del producto

Marca:	Whirlpool
Categoría:	secadora
Modelo:	WGD8120HW
Color del producto:	Transparent, White
Edad recomendada (mín.):	0 maand(en)
No contiene:	Bisfenol A / BPA
Número de botellas incluidas:	6
Material del pezón:	Silicone
Número de tetinas incluidas:	6
Capacidad-de-la-botella:	260 ml
Tasa-de-alimentación:	Langzame stroom