WilTec 63909 Manual de Usario

WilTec bomba de agua 63909

Lee a continuación 📖 el manual en español para WilTec 63909 (9 páginas) en la categoría bomba de agua. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/9

User’s Manual

Pool Pump with Variable Rotation Speed

63908–63910

Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further

developments.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.XPOtool.com Item 63908–63910 Page 2

The Tool Experts

11 2022-1

The information contained in this document may alter at any time without prior notice. No part of this

WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-

ual, nor in the diagrams and illustrations shown.

Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating

manual is complete, accurate, and up- -date, errors cannot be ruled out entirely.to

If you have found an error or wish to suggest an improvement, we look forward to hearing from you.

Send us an e-mail to:

service@wiltec.info

or use our contact form:

https://www.wiltec.de/contacts/

The most recent version of this manual in several languages can be found in our online shop:

https://www.wiltec.de/docsearch

Our postal address is:

WilTec Wildanger Technik GmbH

Königsbenden 12

52249 Eschweiler – Germany

To return your goods for exchange, repair, or other purposes, please use the following address. Atten-

tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team

before returning your goods.

Retourenabteilung

WilTec Wildanger Technik GmbH

Königsbenden 28

52249 Eschweiler – Germany

E-mail: service@wiltec.info

Tel: +49 2403 55592–0

Fax: +49 2403 55592–15

https://www.XPOtool.com Item 63908–63910 Page 3

The Tool Experts

11 2022-1

Introduction

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to

always take some basic safety precautions when using this product. Please read this operating manual

carefully and make sure that you understand it.

Keep these operation instructions in a safe place.

Product features

This HPP-series intelligent pump with variable frequency is a pump that can record pump frequency and

performance changes. It is characterised by simple troubleshooting and high starting torque.

This technical description contains important operating instructions and precise explanations of the set-

ting values and parameters. Before using the pump for the first time (installation, operation, mainte-

nance, and inspection, etc.), carefully and completely read the instructions.

The pump has the following features:

• Data inquiry – Review current power, frequency, and other data

• Convenient speed control – Three dials for quick speed control and up and down buttons for

fine speed adjustment

• Low water protection – Automatically shuts off when the pump detects a lack of water in the

supply line

• Start-up after water supply – The pump recognizes whether there is still water after it has been

switched off due to lack of water and can then be put into normal operation after water supply

• Power fail memory – The pump can automatically record percentage of rotation speed and

on/off status

Safety instructions

• The pump must be operated in a clean and dry place with good ventilation.

• Water ingress into the control box and too low or too high temperatures can damage the pump.

• Users must observe the safety rules for using electricity.

• The pump must never be operated with wet hands.

• If there is no fan, it must be ensured that the fan at the end of the motor can blow through the

cooling fins to avoid high temperatures.

• The water pump motor is a three-phase induction motor, and the pump is delta-earthed. Please

ensure safe and correct earthing.

• Whenever you use the pump, install the frequency converter according to the instructions.

• Always and only operate the pump in accordance with the instructions.

Especificaciones del producto

Marca:	WilTec
Categoría:	bomba de agua
Modelo:	63909
Color del producto:	Zwart
Peso.:	4000 g
Ancho:	441.1 mm
Profundidad:	204.3 mm
Altura:	44 mm
Nivel de ruido:	21.3 dB
Manual de usuario:	Ja
Material de la carcasa:	Metaal
Indicadores LED:	Activity, Link, PoE, Power, Speed
Cables suministrados:	AC
Consumo de energía (máx.):	420 W
Certificación:	FCC A, CE, RoHS
Estándar de red:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Temperatura de almacenamiento:	-10 - 70 °C
numero de fans:	2 ventilator(en)
Protección de voltaje de energía:	Over voltage, Overload, Short circuit
Montaje en bastidor:	Ja
Tiempo medio entre fallos (MTBF):	144000 uur
MDI/MDI-X automático:	Ja
Alimentación a través de Ethernet (PoE):	Ja
Apilable:	Nee
Capacidad de conmutación:	36 Gbit/s
Dirección MAC:	8192 entries
soporte 10G:	Nee
Gestión del flujo de datos:	Ja
Tipo de interruptor:	Unmanaged
Número de puertos Ethernet RJ-45 de conmutación básica:	16
Tipo de conmutación básica de puertos Ethernet RJ-45:	Gigabit Ethernet (10/100/1000)
Número de ranuras para módulos SPF:	2
Almacenamiento de búfer de paquetes:	0.5 MB
Duplex completo:	Ja
Tecnología de cableado Ethernet de cobre:	100BASE-TX, 1000BASE-T
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Temperatura de funcionamiento (TT):	0 - 45 °C
Humedad relativa de funcionamiento (VV):	10 - 90 procent
Código del Sistema Armonizado (SA):	85176990
Presupuesto total de alimentación a través de Ethernet (PoE):	370 W
Número de puertos Power over Ethernet plus (PoE+):	16
almacenamiento y reenvio:	Ja
Tipos de cables compatibles:	Cat5, Cat5e
Paquete de montaje en bastidor:	Ja
Alimentación por puerto Alimentación a través de Ethernet (PoE):	30 W
Detección automática:	Ja
Velocidad de reenvío de paquetes (10 Mbps):	14880 pps
Velocidad de reenvío de paquetes (100 Mbps):	148800 pps
Velocidad de reenvío de paquetes (1 Gbps):	1488000 pps