Yamaha SM12V Manual de Usario

Yamaha Speaker SM12V

Lee a continuación 📖 el manual en español para Yamaha SM12V (11 páginas) en la categoría Speaker. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/11

ENGLISHDEUTSCHFRANÇAISESPAÑOL

SPEAKER SYSTEM

S112 /S115 /S215VVV

SM10 /SM12 SM15V V/ V

SUBWOOFER

SW115 /SW118 /SW218VVV

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

Manual de instrucciónes

Thank you for choosing the YAMAHA speaker system. In

order to take maximum advantage of the speaker’s features

and ensure maximum performance and longevity, please

read this manual carefully before using the speaker system.

Keep the manual in a safe place for future reference.

Contents

PRECAUTIONS .................................................................. 2

Connecting the Speakers..................................................... 4

Speciﬁcations ...................................................................... 6

Technical Data/Kennlinien/Données techniques/Datos téc-

nicos .................................................................................. 32

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

• Do not open the device or attempt to disassemble the inter-

nal parts or modify them in any way. The device contains

no user-serviceable parts. If it should appear to be mal-

functioning, discontinue use immediately and have it

inspected by qualiﬁed Yamaha service personnel.

• Do not expose the device to rain, use it near water or in

damp or wet conditions, or place containers on it contain-

ing liquids which might spill into any openings.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the device or other property. These precautions include, but are not limited to, the following:

• If you use a stand, check the stand’s speciﬁcations and

make sure that it is sturdy enough to support the weight of

the speaker. You may need to limit the number of people

around the placed stand, in order to avoid toppling the

device or causing damage to the internal components.

• If you use speaker stands, be sure to keep the following

cautions.

– Use the speaker stands with their legs fully opened.

– Place only one speaker on each speaker stand.

– Tighten fastening screws securely.

– Remove the speakers from the stands before moving

the stands or adjusting their height.

– Add weight such as sand bags around the stand legs to

prevent them from falling over.

– Use the stand at a maximum height of 140 cm.

• If you use a metal socket of the SW115V/SW118V sub-

woofer to allow mounting of a satellite speaker, use a pole

shorter than 90cm with an outer diameter of 35mm.

• When transporting or moving the device, always use two or

more people.

• Before moving the device, remove all connected cables.

• Do not expose the device to excessive dust or vibrations,

or extreme cold or heat (such as in direct sunlight, near a

heater) to prevent the possibility of panel disﬁguration or

damage to the internal components.

• Do not place the device in an unstable position where it

might accidentally fall over.

• Before connecting the device to other devices, turn off the

power for all devices. Before turning the power on or off for

all devices, set all volume levels to minimum.

• Use only speaker cables for connecting speakers to the

speaker jacks. Use of other types of cables may result in

ﬁre.

• Be sure to observe the ampliﬁer’s rated load impedance

(see page 4), particularly when connecting speakers in

parallel. Connecting an impedance load outside the ampli-

ﬁer’s rated range can damage the ampliﬁer.

• Do not use the device for a long period of time at a high or

uncomfortable volume level, since this can cause perma-

nent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

• Do not operate the device if the sound is distorting. Pro-

longed use in this condition could cause overheating and

result in ﬁre.

• Always turn AC power to the power ampliﬁer on last in any

audio system to avoid speaker damage. When turning

power off, the power ampliﬁer should be turned off ﬁrst for

the same reason.

Do not open Water warning

Location Connections

Handling caution

ENGLISH

• In any system using two or more speakers, be sure to match

the connection polarities of all speakers to the ampliﬁer(s) –

e.g. always connect “+” to “+” and “-” to “-”. If the polarities

are not properly matched the speakers will be driven out of

phase and the sound will suffer.

• Use only Neutrik NL4FC plugs for connecting Speakon con-

nectors.

* Illustrations in this manual are for explanatory purposes

only, and may not match the actual appearance of the prod-

uct during operation.

* Company names and product names used in this Owner’s

Manual are trademarks or registered trademarks of their

respective owners.

This product, when used in combination

with ampliﬁcation and/or additional loud-

speakers, may be capable of producing

sound levels that could cause permanent

hearing loss.

DO NOT operate at high volume levels or at

a level that is uncomfortable. If you experi-

ence any discomfort or ringing in the ears, or

suspect an hearing loss, you should consult

an audiologist.

To protect your speakers

When choosing a power ampliﬁer to use with your speakers,

make sure that its power output matches the speakers’ power

capacity (refer to the Speciﬁcations on page 6). Even if the

ampliﬁer’s power output is lower than the speakers’ PGM

(program) power capacity, the speakers may be damaged

when clipping of a high input signal occurs.

The following may cause damage to speakers:

• Feedback caused when using a microphone.

• Continuous high sound pressure level produced by elec-

tronic instruments.

• Continuous high-power output distorted signals.

• Popping noises caused by turning on equipment, or by

connecting or disconnecting system components while the

ampliﬁer is turned on.

Poly Switch

All full-range loudspeakers are ﬁtted with a self-resetting

poly switch that protects the high-frequency driver from

damage caused by excessive power.

If a loudspeaker cabinet loses high-frequency output, imme-

diately remove power from the unit and wait for two to three

minutes. They should allow the poly switch to reset. Re-

apply power and check the performance of the high-fre-

quency driver before continuing with the power reduced to a

level that does not cause the poly switch to interrupt the sig-

nal.

On the SW115V/SW118V/SW218V sub woofer, the Poly

Switch protects the woofer and a similar routine should be

followed if its output is lost.

Yamaha cannot be held responsible for damage caused by

improper use or modiﬁcations to the device.

Especificaciones del producto

Marca:	Yamaha
Categoría:	Speaker
Modelo:	SM12V
Color del producto:	Zwart
Pantalla incorporada:	Nee
Peso.:	- g
Tipo de embalaje:	Blister
Interruptor encendido / apagado:	Ja
red LAN:	Nee
Altavoces incorporados:	Nee
Número soportado de baterías/baterías:	3
Interfaz:	IR Draadloos
Teletexto:	Ja
Rango maximo:	7 m
Teclas retroiluminadas:	Ja
Color de retroiluminación:	Wit
Tipo de entrada:	Drukknopen
Uso correcto del mando a distancia.:	DVD/Blu-ray, SAT, TV, VCR
Temporizadores programables:	Ja
Desplazarse:	Nee
Wifi.:	Nee
Baterias-incluidas:	Nee
Tipo de Batería:	AAA
cursores:	Ja