Yamaha soavo 1 Manual de Usario

Yamaha Vocero soavo 1

Lee a continuación 📖 el manual en español para Yamaha soavo 1 (26 páginas) en la categoría Vocero. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/26
English Français
1
En
Deutsch Español
Read this before using the speakers.
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install the speakers in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical shock,
do not expose the speakers to rain or water.
•To prevent the enclosure from warping or discoloring, do
not place the speakers where they will be exposed to
direct sunlight or excessive humidity.
Do not place the following objects on the speakers:
Glass, china, etc.
If glass etc. falls by vibrations and breaks, it may cause
personal injury.
A burning candle etc.
If the candle falls by vibrations, it may cause fire and
personal injury.
A vessel with water in it
If the vessel falls by vibrations and water spills, it may
cause damage to the speakers, and/or you may get an
electric shock.
Do not place the speakers where foreign objects such as
water drips might fall. It might cause a fire, damage to
the speakers, and/or personal injury.
Do not place the speaker where it is liable to be knocked
over or struck by falling objects. Stable placement will
also ensure better sound performance.
PRECAUTIONS
Thank you for selecting this YAMAHA Soavo-1 speaker system.
Placing the speakers on the same shelf or rack as the
turntable can result in feedback.
Never put a hand or a foreign object into the port located
on the front of the speaker as this might cause personal
injury and/or damage to the speaker.
When moving the speaker, do not hold the port as it
might cause personal injury and/or damage to the
speaker.
Any time you note distortion, reduce the volume control
on your amplifier to a lower setting. Never allow your
amplifier to be driven into “clipping”. Otherwise the
speakers may be damaged.
When using an amplifier with a rated output power higher
than the nominal input power of the speakers, care
should be taken never to exceed the speakers’ maximum
input.
Do not attempt to clean the speakers with chemical solvents
as this might damage the finish. Use a clean, dry cloth.
Do not attempt to modify or fix the speakers. Contact
qualified YAMAHA service personnel when any service
is needed. The cabinet should never be opened for any
reasons.
As this unit is heavy, whenever it is moved, two people
are requierd to transport it safely.
Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of speakers.
The speaker is constructed with the majority of the weight
located in its upper portion, and is thus susceptible to falling
over if proper care is not taken to insure its stability. If the
speaker falls over, it may damage the speaker or be the
cause of injury (or even death) to persons and/or damage to
personal property.
PRECAUTIONS WHEN POSITIONING
For safe and proper use of the speaker:
Position the speaker in a location that is solid, level,
smooth, and low (with respect to the floor).
Do not push or apply pressure to the side of the speaker
when moving, or lean objects against the side of the
speaker.
Do not sit on or set objects on top of the speaker.
Do not remove the stands attached to the bottom of the
speaker as this might cause the serious accidents,
resulting from falling over of the speaker.
Vibrations or jolts associated with earthquakes and other
phenomena or activities may cause the speaker to fall over.
For safety reasons, using commercially available products
that increase stability in the speaker is recommended
(metal fittings or chains, etc.).
Soavo-1 Speaker System
OWNER’S MANUAL
URGT
01_EN_Soavo-1_URGT.p65 6/26/06, 9:36 AM1
2
En
Attach the spikes at the four point on the speaker stand
to increase stability and improve sound quality.
How to attach the spikes:
1Lay down this unit on the floor.
2Turn the nut and position it near the tip of the spike.
3Screw the spikes into the hole of the stands.
4
Place the speaker in the desired location in an upright
position and adjust the length of the spike to match
the depth of the carpet. (repeat step 1, 2 and 3.)
5When adjustment is finished, turn the nut up to the
base of the stand firmly.
Notes
The tips of the spikes may scratch or damage the
flooring. Please be careful when positioning the
speakers.
Do not push or lean against the speaker to prevent
falling over, which may cause damage to this unit
or personal injury.
As this unit is heavy, whenever it is moved, two
people are requierd to transport it safely.
FEATURES
Nut x 4
Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers
are slightly angled in towards the listeners.
Using as front speakers in a multi channel
system
Position the speakers on both sides of the TV. The
positioning of speakers is important, because it controls the
whole sound quality of a multi channel system. Set up the
speakers on the basis of your listening position by following
the owner’s manual supplied with your amplifier.
Notes
These speakers feature a magnetically shielded
design, but there is still a chance that placing them
too close to a TV set might impair picture color or
buzzing noise. Should this happen, move the
speakers away from the TV set.
Do not remove the stands attached to the bottom of
the speaker as this might cause the serious
accidents, resulting from falling over of the speaker.
Subwoofer
Center
Soavo-1
Surround
PLACING THE SPEAKERS
•Type: 3-way, 4-speaker bass-reflex floor standing tower speaker for main channels. Aluminum diecast stand
included.
•Woofer: Dual 16 cm A-PMD cone, Midrange: 13 cm A-PMD cone, Tweeter: 3 cm Aluminum dome.
When setting up this unit on a thick
carpet etc.
Spike x 4
2
3
01_EN_Soavo-1_URGT.p65 6/26/06, 9:36 AM2
English
3
En
SPEAKERS
A
B
L
R
+
+
CONNECTIONS TO YOUR AMPLIFIER
Amplifier
Soavo-1 (L)
This speaker system is capable of standard connections and bi-wired connections. Before making
connections, make sure that the amplifier is switched off.
CONNECTIONS
Connect the screw-type terminals at the rear of the
speakers to the speaker terminals of the amplifier with
the speaker cable (sold separately).
Connect the (+) terminals on the amplifier and the
speakers using one side of the cable. Connect the (–)
terminals on both components using the other side of the
cable.
Connect one speaker to the left (L) terminals of your
amplifier, and another speaker to the right (R) terminals,
making sure not to reverse the polarity (+, –). If one
speaker is connected with reversed polarity, the sound
will be unnatural and lack bass.
How to connect the cables:
1Loosen the knob.
2Remove the insulation coating at the extremity of each
speaker cable by twisting the coating off.
3Insert the bare wire into the hole.
4Tighten the knob and secure the cables.
Test the firmness of the connection by pulling lightly on
the cables at the terminal.
Notes
Do not let the bare speaker wires touch each other as
this could damage the speaker or the amplifier, or
both of them.
Do not insert the insulation coating into the hole.
The sound may not be produced.
<Standard connections>
Jumper
cable
Leave the jumper
cables in place
when connecting.
Soavo-1 (R)
Speakers
terminals of
the amplifier
Loosen Tighten
Insulation coating
Bare wire
01_EN_Soavo-1_URGT.p65 6/26/06, 9:36 AM3

Especificaciones del producto

Marca: Yamaha
Categoría: Vocero
Modelo: soavo 1

¿Necesitas ayuda?

Si necesitas ayuda con Yamaha soavo 1 haz una pregunta a continuación y otros usuarios te responderán




Vocero Yamaha Manuales

Vocero Manuales

Últimos Vocero Manuales