4ms Sampler Manual de Usario

4ms No categorizado Sampler

Lee a continuación 📖 el manual en español para 4ms Sampler (20 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/20
Sampler
4ms Company
User Manual 1.0 – June 13, 2023
for f irmware v1.0
The Sampler is a high fidelity, two-channel stereo audio recorder and playback module. The can record Sampler
and play back high quality stereo WAV files. A maximum of 600 samples can be loaded at one time from the
removable microSD card, in a variety of formats up to 96kHz/32-bit/stereo WAV. All sample parameters (pitch,
sample file selection, length, bank, and start position) are CV controllable, and trigger jacks for play/record, and
reverse allow for synchronization.
•Stereo playback channels can play any of 600 samples"
•Recording creates stereo WAV files directly onto microSD Card for immediate use"
•Extremely low noise, high fidelity design"
•Plays a variety of WAV files up to 32-bit/96kHz"
•Records at 24-bit or 16-bit/48kHz (future firmware will support up to 96kHz)"
•Intelligent file system makes loading large sample libraries easy by organizing banks into folders"
•CV and controls for 1V/oct tracking, Start Position, Length, Sample selection, Bank, Reverse and
Play/Record"
•Includes microSD card with Sample Pack and SD Card adaptor"
1 10
2 9
3 8
4 7
5 6
All
Play
SamplePitch
Pitch
Right Bank
Out Right End Out Reverse
Sample
LengthStart Pos.
Out Left
LengthStart Pos.
ReverseBank
Play/RecLeft
RECORD
SAMPLER
Table of Contents
Setting up your Sampler# "........................................................................................3
Overview# "................................................................................................................3
Electrical and Mechanical Specifications# "..............................................................4
Tutorial 1: Basic Playback# "......................................................................................5
Tutorial 2: Navigating Banks# "..................................................................................7
Quick Bank Select# "...........................................................................................7
Channel Playback Volume# ".....................................................................................8
Stereo/Mono Mode# "................................................................................................8
Tutorial 3: Recording Samples# "...............................................................................8
Enabling Recording# "..........................................................................................8
Start/Stop Recording# ".......................................................................................9
Where is my recording?# "...................................................................................9
Tutorial 4: Loading Files onto the microSD Card# "...................................................9
Create a bank by copying a folder of WAV files# ".............................................10
Folders with color names# "...............................................................................11
Automatic loading of new/moved files# "...........................................................11
Sample List HTML file# "..........................................................................................11
Example Patches
Sequencing the Sampler# ".....................................................................................12
Granular Scrubbing# "..............................................................................................12
Clock Sync and Shifting Ping-Pong Loops# ".........................................................13
Advanced Features
CV Calibration# "......................................................................................................14
Start-up bank# ".......................................................................................................14
Adjustable Fade Time (Smoother Looping)# ".........................................................15
System Settings File# "............................................................................................15
Variable Trigger Delay / Latency# "..........................................................................17
Color Adjustment Mode# ".......................................................................................17
Rebuilding the Index File# ".....................................................................................18
Updating Firmware (Audio Bootloader)# "...............................................................18
What version is my Sampler?# "..............................................................................18
microSD Card Specifications# "...............................................................................19
File Formats# ".........................................................................................................19
Chart of Special Button Features#........................................................................20
Page of 2 20
Setting up your Sampler
1. Remove the Sampler from the box and anti-static bag."
2. Connect the larger end of the power cable to a 16-pin Eurorack power header on your power
supply distribution system, with the red stripe towards the -12V. The other end of the power cable
is a 10-pin connector which should be connected to the so the red stripe on the power Sampler
cable is orientated towards the bottom of the module (the bottom is marked by a white stripe and
“-12V”). Note: The is reverse-polarity protected, but other modules being incorrectly Sampler
connected could damage anything on the power bus."
3. Backup your microSD card before you first power the Sampler on! We recommend you
perform a full backup of the microSD card by using a computer (use the included SD card adaptor
if needed). This will be useful if the card ever becomes damaged or you wish to restore the
Sampler to the original factory settings and samples."
4. Securely screw the to the rails of your case. Power the system on.Sampler "
5. When the first turns on, it will scan the SD Card for WAV files. The lights will flash purple, Sampler
yellow, and other colors. When the lights stop flashing and just the Bank light is on, the is Sampler
ready to play."
Never remove the microSD card when playing or recording!
Overview
• "Up to 600 samples loaded at one time (10 samples per bank)
•Includes a microSD card with over 200 samples"
• "Extremely quiet, low noise and low jitter design
•Firmware can be updated by playing an audio file into the Sampler"
Playback channel:
•Mono or stereo output through and jacksOut Left Out Right "
•Play button/trigger jack: Tapping the button or receiving a trigger starts/re-starts the sample"
•When is set to “All”, the button starts/stops the sample (set in Length Play System Settings
File, see page 15)"
•Sample CV/knob: selects a sample from the bank"
•Pitch CV/knob: playback pitch (-9 to +4 octave range)"
•Tracking: +/- 0.4cents over four octave range (C0–C3)"
•Pitch jack can be calibrated to an external keyboard or sequencer"
•Start Pos CV/knob: position in the sample to begin playback (loop start point)"
•Length CV/knob: playback time (loop end point)"
•Length knob at max: entire file is played"
•Length knob 50%-99%: 200ms - 5s of the sample is played (beginning at the Start Position)"
•Length knob <50%: Percussive decay envelope is applied to the playback (attack-only
envelope if playing Reverse)"
•Length <1%: Tiny grains are played (can be used to sweep through sample file data
manually)"
•Reverse button/jack: toggles forward/backwards"
•Bank button/jack: selects channel's bank "
# "Tip: Hold and turn the and/or knob for fast selection of bankBank Sample Length
•Reverse Start Pos+ button/knob combo allows for setting volume of each channel
independently."
• "Maximum file size for playback: 4GB per file (6.2 hours per file at 48kHz/16b/stereo)
Page of 3 20

Especificaciones del producto

Marca: 4ms
Categoría: No categorizado
Modelo: Sampler

¿Necesitas ayuda?

Si necesitas ayuda con 4ms Sampler haz una pregunta a continuación y otros usuarios te responderán


No categorizado 4ms Manuales

4ms

4ms Listen Up Manual de Usario

1 Octubre 2024
4ms

4ms Buff Mult Manual de Usario

22 Septiembre 2024
4ms

4ms Catalyst Sequencer Manual de Usario

15 Septiembre 2024
4ms

4ms Looping Delay Manual de Usario

4 Septiembre 2024
4ms

4ms Sampler Manual de Usario

4 Septiembre 2024
4ms

4ms Ensemble Oscillator Manual de Usario

23 Agosto 2024
4ms

4ms Pod34X Manual de Usario

1 Agosto 2024
4ms

4ms Spectral Multiband Resonator Manual de Usario

27 Julio 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024