AcuRite Home Comfort Monitor 01523 Manual de Usario

AcuRite Estación meteorológica Home Comfort Monitor 01523

Lee a continuación 📖 el manual en español para AcuRite Home Comfort Monitor 01523 (2 páginas) en la categoría Estación meteorológica. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
Dial Thermometer
The dial thermometer is designed for indoor use only and will provide an accurate
measurement of air temperature in the vicinity of the instrument.
Dial thermometers are operated by sensitive bi-metal coil spring mechanisms that
respond to air temperature changes. The thermometer instrument has been
calibrated at the factory and should not need adjustment. As with all instruments
that are placed in a new location, you should always allow a period of several hours
for stabilization before determining whether it is reading accurately. Should you
determine that an adjustment of the thermometer is needed, this can be achieved by
using a small head screwdriver. On the back of the thermometer is a small hole
which will allow you to manually calibrate the temperature.
Insert the screwdriver head into the gold slot and turn clockwise or counter-clockwise
until the indicator hand is pointing to the known temperature reading.
Hygrometer (Humidity Meter)
Hygrometers measure relative air moisture percentage indoors. These instruments
operate by a sensitive coil spring that is bonded with a moisture absorbent material.
Hygrometers register the percentage of water vapor present compared to the
maximum amount that could be present at that air temperature. This is why the
instruments are also referred to as Humidity Meters. All air contains microscopic
water particles that are invisible to the human eye. If enough water is vaporized into
the air, the air will become “saturated”. This is considered to be 100% humidity.
The coils in hygrometers respond slowly and when humidity levels change abruptly, it
can take an hour or more for the meter to reach an accurate reading. Remember
that the hygrometer is reading indoor humidity, not the outdoor humidity as reported
by the weather service.
It is not uncommon to have low humidity readings during cold weather when indoor
air is heated. Humidity readings of 10% to 25% are typical where humidifiers are not
used to add water vapor into the air. The optimum humidity levels should be
maintained between 45% and 50% during heating seasons. Low humidity levels can
cause health problems and can be hard on wood furnishings.
Acurite® hygrometers are preset at the factory and typically should need no further
adjustment. Remember to allow ample time for the instrument to stabilize in its new
location before determining whether accurate humidity levels are being indicated. If you
do decide that the instrument needs re-adjustments, this can be done as follows:
Soak a folded face cloth or dish cloth with water and place the cloth on a plate, saucer or
another relatively flat container. Remove the hygrometer from the home comfort monitor
plaque by simply placing your hand against the back plate and pushing the instrument out
3 • How your home comfort monitor works
2
Home Comfort Monitor
01523
Instruction Manual
Package Contents:
(1) Home Comfort Monitor (A)
(1) Instruction Manual
A. Home Comfort Monitor
INST - 01523 100809
1 • Choosing the correct location
Thank You for purchasing this ACURITE® product. To fully
understand and appreciate your new home comfort monitor, please
read this document carefully.
Acurite® home comfort monitors are designed for indoor use only. They should be
placed on inside walls and away from heat registers, air conditioners, humidifiers,
and out of direct sunlight as these locations may affect the accuracy of the
thermometer and hygrometer instruments.
Mount your weather station on the wall
The Acurite® home comfort monitor has keyhole slots cut into the backside for
hanging. Use a securely anchored screw, nail or hook to support the weight of the
home comfort monitor. Make certain the screw/nail head is large enough to prevent
the monitor from slipping off in the event it is jarred or bumped.
2 • Care and cleaning of your home comfort monitor
Wood Plaque
The solid wood plaque is finished with a clear satin lacquer to protect and preserve
the appearance. Although occasional use of a good furniture paste wax is acceptable,
we recommend that periodic cleaning with a very lightly dampened soft cloth is best.
Be sure to wipe the wood dry with a soft cloth after cleaning.
Instruments
Avoid use of harsh household cleaners and coarse paper towels which would damage
the lacquer coating on the bezel and scratch the lens. Fingerprints and dirt may be
removed from the lenses and bezels with a soft cloth lightly dampened with a mixture
of water and mild dish washing liquid. Be sure to dry the lens and bezel with a soft
cloth after cleaning.
1
of its mounting hole. Carefully lay the back edge of the hygrometer flat on the damp cloth.
Allow 30-45 minutes for the hygrometer to read approximately 95% humidity, If the
reading is not indicated, carefully rotate the coil by using a small head screwdriver counter
clockwise until the indicator hand is reading 95%.
Remount the hygrometer into the wood plaque. The hygrometer will gradually return to
indicate the actual condition of the air moisture content. IMPORTANT: Any other method
than what has been described to adjust the hygrometer could damage the instrument.
Dial Barometer
Acurite® barometers indicate barometric pressure by measuring changes in a small
chamber that has a partial vacuum. As atmospheric pressure varies on the chamber
and changes shape, it moves a small drive linkage connected to the indicator hand.
This linkage movement rotates the hand to register changes in pressure.
Unlike the thermometer and hygrometer instruments, the barometer is not affected
by location. Because all buildings have some air leakage, the atmospheric pressure
is the same indoors as it is outdoors.
The barometer has been regulated at the factory to function accurately at 950 ft.
above sea level. If the altitude in your location is different, the barometer must be
re-adjusted or reset using either of the following methods:
1. Contact your local radio/TV/internet weather service to get the correct barometric
pressure reading for your location. Now set your barometer to that reading by using a
blade screwdriver to turn the small adjustment screw located in the back of the
barometer instrument case. Turn the screw to the left or right until the indicator
hand moved in the direction you want. Continue to turn the screw until the indicator
hand is registering the correct pressure. Lightly tap the center of the lens to make
sure that the “adjustable pointer” is moving freely. This ensures that friction from the
linkage is not affecting a correct reading by the indicator. CAUTION: Be careful not to
force the adjustment screw. If the screw becomes tight in either direction, the end of
the adjustment range has been reached.
2. Use an existing barometer at your location which is known to be accurate and set
the new Acurite® barometer to the same reading using the same procedure as
outlined in step one.
The capability of a barometer to indicate changes in atmospheric pressure makes it a
valuable instrument in weather forecasting. You should take a reading at least once
daily, and always rotate the “adjustable pointer” to the exact location of the indicator
hand at the time of your reading. The “adjustable pointer” will allow you to tell what
changes in pressure have occurred since your last reading. Remember that the rate
of pressure change is just as important as the amount of change. This is why
multiple readings each day are best for accurate weather forecasting.
For the most accurate atmospheric pressure reading, it is a good idea to first lightly
tap the lens before checking the exact position of the indicator hand on the dial.
3
The following meteorological “Rules of Thumb” will help you interpret your Acurite
®
barometer readings.
1. A rise in barometric pressure typically indicates clearing weather can be expected
2. A rapid drop in barometric pressure typically indicates that weather disturbances
are nearby and could result in precipitation
3. A slow but continuous drop in barometric pressure typically indicates that
persistent bad weather can be expected
4. Steep pressure drops typically indicates approaching storms with strong winds
Remember that many factors determine actual weather conditions. Geographic
location, temperature, humidity, wind direction and even the season must be
considered when your barometer indicates a rising or falling atmospheric pressure.
LIMITED WARRANTY-INTERNATIONAL - Consumer may have more remedies at law
than follows. Chaney Instrument Co. warrants to the owner, this product to be free from
material and workmanship for one year from date of purchase. Chaney Instrument shall NOT
BE LIABLE FOR ANY ACCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER
ARISING IN CONTRACT OR TORT. Chaney Instrument’s obligation (at it’s option) is limited to
repair or replace this product. For in-warranty repair, send product, accompanied by
Guarantee, bearing Dealer’s name and date of purchase, with $5.00 to cover handling and
postage to:
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 53147
Please DO NOT return product to the retail store.
For technical assistance and product return
information, please call Customer Care:
877-221-1252
Mon. - Fri. 8:00 A.M. to 4:45 P.M. (CST)
www.chaneyinstrument.com
4

Especificaciones del producto

Marca: AcuRite
Categoría: Estación meteorológica
Modelo: Home Comfort Monitor 01523

¿Necesitas ayuda?

Si necesitas ayuda con AcuRite Home Comfort Monitor 01523 haz una pregunta a continuación y otros usuarios te responderán


Estación meteorológica AcuRite Manuales

AcuRite

AcuRite 01021M Manual de Usario

24 Agosto 2024
AcuRite

AcuRite 02016 Manual de Usario

21 Agosto 2024
AcuRite

AcuRite Home Comfort Monitor 01523 Manual de Usario

19 Agosto 2024
AcuRite

AcuRite 00509 Manual de Usario

19 Agosto 2024

Estación meteorológica Manuales

Últimos Estación meteorológica Manuales

Ascot

Ascot GT-WS-07s Manual de Usario

20 Octubre 2024
Ventus

Ventus K0382 Manual de Usario

18 Octubre 2024
Hyundai

Hyundai WSP 3080 Manual de Usario

15 Octubre 2024
La Crosse Technology

La Crosse Technology V61 Manual de Usario

8 Octubre 2024
Cresta

Cresta WX580M Manual de Usario

6 Octubre 2024
Sencor

Sencor SWS 65 Manual de Usario

5 Octubre 2024
Irox

Irox JKR-1 Manual de Usario

5 Octubre 2024
TFA

TFA 30.5002 Manual de Usario

5 Octubre 2024
TFA

TFA WeatherHub 30.3306.02 Manual de Usario

4 Octubre 2024
Jung

Jung WS10R Manual de Usario

4 Octubre 2024