ADDAC System ADDAC105 Manual de Usario

Lee a continuación 📖 el manual en español para ADDAC System ADDAC105 (5 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
ADDAC105 4 VOICE CLUSTER USER’S GUIDE
October.2019Revision.01
Welcome to:
page 2ADDAC SYSTEM
OVERALL FEATURES
Following our ADDAC103 T-Networks this new module is inspired by it’s simplicity. This is a 4 voice
Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger input. All voices are
then mixed and processed through a Multimode Filter.
Each voice has it’s own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls
the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it also works as a
Mute.
The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes
from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.
All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for
the CV input and [RESONANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]
The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incom-
ing signal to go to:
1. the filter input for processing an external audio source.
2. all of the 4 voices Frequency control allowing for some experimental CV control over pitch of all 4
voices at the same time (due to the specificities of the circuit and to keep the module at a low price
these inputs are not callibrated to 1v/octave).
Tech Specs:
8HP
4.5 cm deep
40mA +12V
40mA -12V
CONTROLS DESCRIPTION
ADDAC105 User’s Guide
page 3ADDAC SYSTEM
Frequency
Tune the Pitch for each voice
Sets Filter Cutoff Frequency
Independent trigger inputs
Cutoff CV Attenuverter
Sets polarity and gain of incoming
CV input
Sets the slew Decay
for each voice
FM on/off switch
Sets Filter Resonance
Bandpass Filter Output
Filter Cutoff CV Input
This input can be routed to send:
1. Audio signal into Filter
2. CV signal to Frequency control
Highpass Filter OutputLowpass Filter Output

Especificaciones del producto

Marca: ADDAC System
Categoría: No categorizado
Modelo: ADDAC105
Colocación del dispositivo: Vrijstaand
Tipo de operación: Buttons, Rotary
Color del producto: Wit
Bisagras de puerta: Links
Pantalla incorporada: Ja
Peso.: 69000 g
Ancho: 600 mm
Profundidad: 590 mm
Altura: 848 mm
Impuesto neto: 2300 W
tipo de cargador: Voorbelading
Color de la puerta: Wit
Material del tambor: Roestvrijstaal
Contenido del tambor: 55 l
Temporizador de inicio retrasado: Nee
Peso del embalaje: 70000 g
Clase de eficiencia energética (antigua): A+++
Consumo de energía de lavado: - kWu
Consumo de agua por ciclo: - l
eraclase: A
Consumo anual de energía de lavado: 172 kWu
Clase de medicamentos centrífugos.: D
Nivel de ruido (lavado): 58 dB
Monitoreo de espuma: Ja
Sistema de control de desequilibrio: Ja
Velocidad centrífuga ajustable: Ja
Velocidad máxima de centrifugado: 1000 RPM
Nivel de ruido durante la centrifugación.: 75 dB
Consumo anual de agua de lavado: 10780 l
Material de carenado: Kunststof
Certificación: CE, VDE
Velocidad mínima de centrifugado: 600 RPM
Peso bruto: 70000 g
Indicador LED de progreso del programa: Ja
Dimensiones (Ancho x Fondo x Alto): 848 x 600 x 590 mm
Capacidad nominal: 7 kg
voltaje-de-entrada-de-CA: 220 - 240 V
Frecuencia-de-entrada-de-CA: 50 Hz
Programas-de-lavado: Hygiene/anti-allergy, Black, Cold

¿Necesitas ayuda?

Si necesitas ayuda con ADDAC System ADDAC105 haz una pregunta a continuación y otros usuarios te responderán




No categorizado ADDAC System Manuales

No categorizado Manuales

Últimos No categorizado Manuales