Aeon Labs Z-Stick Manual de Usario

Aeon Labs Tarjeta/adaptador de red Z-Stick

Lee a continuación 📖 el manual en español para Aeon Labs Z-Stick (4 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Aeon Labs Z-Stick

(Z-Wave USB Adapter)

Introduction:

The Aeon Labs Z-Stick is a self-powered Z-Wave USB adapter with remote network creation

capabilities (independent from external power and host microprocessor). By being able to

remotely include/remove Z-Wave devices, this greatly simplifies Z-Wave network installation.

When connected to a host processor (via USB), it enables the host processor to take part in the

Z-Wave Network.

By taking advantage of the Z-Wave mesh network, commands can be routed to their

destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified

can be used and communicate with other Z-Wave certified devices.

Operating instructions:

The Z-Stick operates in three distinct modes: Inclusion-Mode, Removal-Mode and SerialAPI-

Mode. Both Inclusion-Mode and Removal-Mode require the Z-Stick to be unplugged from the

USB connector of the host, while SerialAPI-Mode requires that the Z-Stick to be plugged into

the USB connector of the host.

• Inclusion-Mode : Adding/Including Z-Wave Devices into the Z-Wave Network

1. To initiate Inclusion-Mode, unplug the Z-Stick from the USB connector and then tap the

button. (The LED will blink slowly.)

Note: While in Inclusion-Mode, the Z-Stick is in perpetual add/inclusion. There is no

need to press the button on the Z-Stick again to include each new device.

2. To include a new Z-Wave device into the network, simply go to the device with the Z-

Stick and press the button on the device you wish to include. (The LED on the Z-Stick

will blink fast during a network neighbor discovery and stay solid for 3 seconds to

indicate successful inclusion of the device into the network.)

3. The LED will then return to blinking slowly, indicating readiness for further device

inclusions. Repeat step 2 for each device as you wish to include.

4. Tap the Z-Stick button to turn it off.

• Removal-Mode : Deleting/Removing/Excluding Z-Wave Devices from the Z-Wave Network

1. To initiate Removal-Mode, unplug the Z-Stick from the USB connector. Then press and

hold down the button for approximately 3 seconds. (The LED will transition from

blinking slowly to blinking fast.)

Note: While in Removal-Mode, the Z-Stick is in perpetual removal/exclusion where it

will remove Z-Wave devices from the networks they are currently paired to. There is no

need to press the button on the Z-Stick again to exclude each device.

2. To remove a Z-Wave device from the network, simply go to the device with the Z-Stick

and press the button on the device you wish to remove. (The LED on the Z-Stick will

immediately stay solid for 3 seconds to indicate successful removal from the network.)

3. The LED will then return to blinking fast, indicating readiness for further device

exclusions. Repeat step 2 for each device as you wish to exclude.

4. Tap the Z-Stick button to turn off.

Especificaciones del producto

Marca:	Aeon Labs
Categoría:	Tarjeta/adaptador de red
Modelo:	Z-Stick

¿Necesitas ayuda?

Si necesitas ayuda con Aeon Labs Z-Stick haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Tarjeta/adaptador de red Aeon Labs Manuales

Aeon Labs Z-Stick Manual de Usario

2 Septiembre 2024

Tarjeta/adaptador de red Manuales

Últimos Tarjeta/adaptador de red Manuales

Cambium Networks CG52A Manual de Usario

26 Octubre 2024

StarTech.com ST1000SPEXD4T Manual de Usario

22 Octubre 2024

Devolo MicroLink dLAN duo Manual de Usario

16 Octubre 2024

Edimax HP-5001K Manual de Usario

16 Octubre 2024

LevelOne FNC-0109TX Manual de Usario

14 Octubre 2024

Edimax EW-7822ULC Manual de Usario

9 Octubre 2024

ZyXEL AP Configurator Manual de Usario

6 Octubre 2024

Linksys AE1000 Manual de Usario

6 Octubre 2024

Trendnet TEW-624UB Manual de Usario

5 Octubre 2024

Nec NP06LM Manual de Usario

4 Octubre 2024