Aerospace Logic TM202B Manual de Usario

Lee a continuación 📖 el manual en español para Aerospace Logic TM202B (15 páginas) en la categoría Kilometerteller. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/15
Aerospace Logic Inc.
180 James Street South, Suite 205, Hamilton, ON, L8P 4V1, CANADA
Tel. 416-628-0725 | www.aerospacelogic.com | Fax. 416-352-5854
This document set is applicable to the following part number configurations:
Dual Tachometer
Part Number Kit Configuration
Instrument Sensor
TM202 TM202 -
TM202B TM202 1 X A200-HMB
TM202S TM202 1 X A200-HMS
TM202R TM202 1 X A200-HMR
Dual Tachometer
Document # S200-TM202X-001
Rev 1.0 10/10/2012
Page 1 of 2
Aerospace Logic Inc.
180 James Street South, Suite 205, Hamilton, ON, L8P 4V1, CANADA
Tel. 416-628-0725 | www.aerospacelogic.com | Fax. 416-352-5854
THIS IS A TRANSPORT CANADA APPROVED MANUAL
The following checklist outlines the required articles for all TM202X products:
Documentation Document Number
Introduction (this document) S200-TM202X-001
Warranty Statement S200-AWS
Installation Instructions S200-TM202X-002
Intensity Control Installation Options S200-DDC-INST
Wiring and Installation Schematic S200-TM202X-003
Human Interface Definition S200-HID
Instrument Setup S200-TM202X-004
Operations Guide S200-TM202X-005
Product Specifications S200-TM202X-006
Installation Compliance S200-TM202X-007
Instructions for Continued Airworthiness S200-ICA
Flight Manual Supplement S200-FMS (If applicable)
Authorized Release Certificate FORM ONE
Permission to Use STC S200-PTU
Canadian STC and Eligibility List STC & S200-CEL
FAA STC and Approved Model List STC & S200-AML
Components
TM202 Instrument and harness
2 X A200-HMx rotational speed sensors as required
4 X Mounting Screws
Dual Tachometer
Document # S200-TM202X-001
Rev 1.0 10/10/2012
Page 2 of 2
Aerospace Logic Inc.
180 James Street South, Suite 205, Hamilton, ON, L8P 4V1, CANADA
Tel. 416-628-0725 | www.aerospacelogic.com | Fax. 416-352-5854
The Fastest Way To Install And Start Using This Product
NOTE: This product is certified as a primary replacement, new or secondary instrument
only when installation is performed in accordance with the documented instructions and
procedures.
1. Review the Warranty Statement before performing any tasks. Do not remove the
instrument from the sealed package until you agree with the stated terms.
2. If this instrument is to be installed in a certified aircraft, verify that the aircraft
model is listed on the Eligibility List (Canadian registered aircraft) or the
Approved Model List (USA and all other countries).
If it is NOT listed, contact your local authority and obtain the necessary
requirements or approvals before proceeding further.
For all other vehicles, including experimental aircraft continue with Step 3.
3. Follow the Installation Instructions exactly as noted, referring to the Wiring
Diagram as and when required. Note: The installation process has been
optimized based on the sequence of components to be installed. Installing the
product in any other way will, in all likelihood, take longer and be more complex.
Ensure that one of the Intensity Control options has been installed in accordance
with document # S200-DDC-INST.
4. Perform the Instrument Setup using the required data as listed in the Instrument
Setup procedure.
5. Validate that all functions perform as outlined in the Operations Guide.
6. Complete all regulatory documentation, if required.

Especificaciones del producto

Marca: Aerospace Logic
Categoría: Kilometerteller
Modelo: TM202B

¿Necesitas ayuda?

Si necesitas ayuda con Aerospace Logic TM202B haz una pregunta a continuación y otros usuarios te responderán