Aktimate Mini+ Manual de Usario

Aktimate Vocero Mini+

Lee a continuación 📖 el manual en español para Aktimate Mini+ (4 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
Congratulations on your purchase of the AktiMate Mini active speaker system.
Using speaker technology licensed from Epos Limited in the U.K., these speakers have been
developed and built to exacting standards.
With a 3-year parts and labour warranty, your AktiMate system will provide you with years of Mini
enjoyment. Choose your source - whether it be an iPod, MP3 player, CD player, tuner, TV or any
other hi-fi product, plug it in, turn-up the volume and have some fun!
The AktiMate speaker system has a built-in 40-Watt per channel amplifier making this a very Mini
flexible and portable hi-fi system, allowing you to listen to your music whenever you like - wherever
you like.
Two way fully shielded active (master) and passive (slave)
Built-in iPod docking station complete with full-set of adaptors for all sizes
Auxiliary connection for any type of audio source including CD, Tuner, etc.
Local volume control on front of active speaker with push button standby feature
IR remote control
Switchable mains voltage
Available in high gloss white, black and red finish
The 3-metre speaker cable is to c onnect the p assive (slave) speaker. You have the choice of f itting
the screw-on banana plugs supplied with the speakers, or simply using bare wires. We recommend
using 4mm plugs. If you want to extend the cable, please do so in one length, not by adding to the
existing cable. Shorting the speaker cable can cause damage to the built-in amplifier.
Be sure to connect the speakers in phase. Maintain the same polarity by connecting the red and
black terminals on one speaker to the red and black terminals on the second speaker. Be sure to
match the gold-coloured side of the speaker wire to the red terminals on both speakers.
Verify that the power switch on the rear of the active speaker is in the off (0) position. Check that the
voltage switch is set to the right voltage for your country. Check with your dealer if you are unsure.
Connect the power cord into the speaker and the other end into the wall outlet. Switch the system on
(1) with the power switch on the rear panel.
It is always worth remembering when positioning hi-fi speakers, that your room acoustics have a
huge impact on the overall sound quality. As a consequence, there are no h ard and fast rules when
specifying placement, so we would always recommend that you try a few different locations to see
what works best for your particular taste.
As a rule, your speakers should be equidistant from side walls and at least 15-30 cm (6-12 ins) from
a rear wall. The ideal height would be when tweeters are at eye or ear level when listening.
FEATURES (See rear page for full specification)
r
r
r
r
r
r
r
CONNECTION
Speaker Cable
Power Cord
POSITIONING
AktiMate
Mini
Setup Instructions
RUNNING IN
CLEANING
CONTROLS
STANDBY
VOLUME
Although a running in period is not required, AktiMate speakers will undoubtedly improve after Mini
some use. We therefore recommend that you play between 24 and 36 hours of music before doing
any critical listening. You’ll be surprised at the result!
We wouldn’t recommend the use of any commercial solvents or household cleaners. All you need to
do is to wipe them over with a soft, dry cloth.
The active speaker features a volume control knob on the lower right hand side of the front of the
speaker and an infrared sensor on the lower left, which also contains 2 indicator LED’s.
To start playing the AktiMate speakers from an iPod or other input, wake-up the system by Mi ni
pressing the volume knob once. This will turn the orange LED off. To stop an iPod playing at a
precise point and cut the sound, press the knob once again.
When the system is in Standby, power consumption is reduced to
a minimum.
To operate the volume, rotate the knob right or left to increase or decrease the level. The blue LED in
the window will flash when the volume level is changing. There are 30 level steps from 0 to
maximum.
When waking the AktiMate Mini from Standby,
any iPod in the dock will automatically start to play at a pre-set level of 8. If you don’t want this to happen, remove
the iPod from the docking station first.
REMOTE CONTROL HANDSET
It is possible to put the system into Standby or wake it up by pressing the power
button (top left side) on the remote control. The blue LED will light when On and
orange will light when in Standby.
The remote control handset allows basic functions for your iPod - i.e. menu,
enter, forward/back, shuffle, repeat, play and pause.
The volume control buttons on the bottom right and left of the handset control the
volume level of all inputs and iPod. The blue LED will flash to show when the
volume is changing from 0 to 30.
Pressing the Mute button on the top right will cut the sound from all inputs and a
red LED will light. When muted, the source will continue to play but will not be
heard.
iPod CONNECTION
AIRPORT EXPRESS
MP3 CONNECTION
USB
The iPod connection is an integral part of the loudspeaker system.
Carefully plug your iPod into the docking station on the top of the speaker, using the appropriate
adaptor to suit your iPod body. The docking station will accept most types of iPod. A range of
adaptors can be found in the accessory pack provided.
Choose the music you wish to listen to and operate the volume control either on the front of the
speaker or by using the handheld remote.
It is possible to link an Airport Express to your Aktimate speakers. First, connect the Airport Mi ni
Express receiver to the mains socket and then run a cable from the receiver to the 3.5mm jack plug
socket on the rear of the speaker.
Any make of MP3 or MP4 player can be connected, simply by using the 3.5mm jack plug input on the
rear panel.
Your Aktimate speakers have a USB connector on the rear panel. This can be used for charging Mini
an iPod or MP3 player. Simply connect the USB cable to the iPod or MP3 player, making sure the
speaker is switched-on! The USB connection is not designed to connect to a computer.
AktiMate
AUXILIARY INPUTS
AUXILIARY OUTPUTS
In addition to being able to play various sizes of iPod, your
AktiMate speakers have 2 other types of inputs on the Mini
rear panel. The RCA input (L&R) is ideal for connecting to
a CD player, tuner, or other line level source. The AUX
3.5mm socket is ideal for connecting to a computer sound
card, AirPort Express, or other type of MP3 player.
Please note that all 3 inputs are connected together
internally. If you choose to connect to 3 different sources at
the same time the level of one or other source may be
reduced. Only removing one or other device will bring the
level back to normal. Please note also that if 3 devices are
playing at the same time, they will all be heard together.
Pause or stop the unwanted devices to listen to the one you
want.
The RCA stereo output on the rear panel allows a second
pair of AktiMate speakers or a subwoofer to be Mi ni
connected, to extend the low frequencies. Look at
www.aktimate.com for the matching subwoofer.
It is possible to run multiple pairs of Aktimate speakers Mi ni
with an RCA stereo cable. Simply connect between the aux
RCA output of the master pair and the aux RCA input of the
second pair. The source will then play simultaneously
through the second pair. The volume can be controlled by
the master volume, but the level should be increased on
the slave pair to suit the conditions.
TROUBLESHOOTING
If the front panel LED does not light .....check the following
If no sound or low level sound can be heard .....check the following
If there is sound from only one speaker .....check the following
If you have 2 or more sources connected and they seem to be playing simultaneously
WARRANTY INFORMATION
Is the AC power cord firmly plugged in to the rear panel and wall socket?
Is the power switch on rear panel set to ON (0 is off/1 is on)?
Is the Voltage selector on the rear panel on the correct setting for the mains supply?
Is the master speaker turned-on?
Is the volume control turned-down or muted?
If using an iPod, is it seated in the dock correctly and is it playing?
Is the source component connected and is it playing?
Is the speaker cable properly connected from the master to the slave (left to right)? Re m o v e
the cable and re-connect making sure to remove any plastic insulation from the wire ends.
Remove your iPod, if listening to a source through the RCA or 3.5mm jack connections.
Press stop on your source product connected via RCA or 3.5 mm jack connections if listening
to an iPod.
Your Aktimate system has a three year parts and labour warranty from the date of purchase. Mini
Please keep your receipt to verify purchase date. The warranty is automatic. You do not need to
register.
Your warranty does not cover any damage caused by misuse, neglect, abuse or problems caused by
power surges or lightning strikes. Unauthorised modification to the Aktimate system voids the Mini
warranty.It is your responsibility to get your Aktimate system back to the point of sale for Mini
service. However, if no fault is found and the problem you have experienced is found to be
elsewhere, you will be liable for any costs incurred, plus return freight. Warranty is the responsibility
of the international distributor. All warranty claims must be referred to your dealer/distributor. This
does not affect your legal rights.
If you connect two or three devices at once, it may reduce the volume level of one input until
you disconnect one of the other unused devices.
REAR PANEL
POWER
AC
VOLT AGE
SELECTOR
WA RNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE
WA RNING: FOR CONTINUED PROTECT ION AGAINST RISK
OF FIRE, REPLACE ONLY W IT H T HE SAME TYPE OF FUSE
DESIGNED IN AUST RALIA.
ww w.aktima te.com
MAX POWER
CONSUMPTION:
200 WAT TS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WARNING: SHOCK HAZARD - DO NOT OPEN
INPUT
R L
+
+
+
++
-
-
-
--
SERIAL
NUMBER
ON
OFF
FUSE:T2AL 250V/50Hz
T 4AL 120V/60Hz
SLAVE
SPEAKER
N15057
RoH
S
USB OUTPUT
R L VIDEO AUX
OUTPUT TO
OUTPUT TO
OUTPUT TO
OUTPUT TOOUTPUT TO
Recharge
only
DC +5V
~120V
60Hz
~240V
50Hz
AktiMate Mini
Act ive Loudspeaker
AktiMate also has a video output for connection to a larger monitor. This is ideal if your iPod has Mini
photo or video storage! It requires an RCA to RCA cable to connect to the TV or other monitor, similar
to connection of a camcorder. N.B. Not all TV monitors have this connector.

Especificaciones del producto

Marca: Aktimate
Categoría: Vocero
Modelo: Mini+

¿Necesitas ayuda?

Si necesitas ayuda con Aktimate Mini+ haz una pregunta a continuación y otros usuarios te responderán


Vocero Aktimate Manuales

Aktimate

Aktimate Mini+ Manual de Usario

5 Septiembre 2024

Vocero Manuales

Últimos Vocero Manuales

Continental Edison

Continental Edison CELED53HP20V2B4 Manual de Usario

27 Octubre 2024
Canton

Canton Vento 830.2 Manual de Usario

27 Octubre 2024
Jamo

Jamo S7-25C Manual de Usario

27 Octubre 2024
Bowers Wilkins

Bowers Wilkins 707 S2 Manual de Usario

27 Octubre 2024
Monacor

Monacor GLS-301/GR Manual de Usario

27 Octubre 2024
Monitor Audio

Monitor Audio Silver C150 Manual de Usario

26 Octubre 2024
FBT

FBT MITUS 210M Manual de Usario

26 Octubre 2024
CyberData Systems

CyberData Systems SIP 011398 Manual de Usario

26 Octubre 2024
Lamax

Lamax PartyGo1 Play Manual de Usario

26 Octubre 2024
IKEA

IKEA SYMFONISK 405.847.50 Manual de Usario

26 Octubre 2024