Akyga AK-I1-200 Manual de Usario

Akyga Cargador para dispositivo móvil AK-I1-200

Lee a continuación 📖 el manual en español para Akyga AK-I1-200 (2 páginas) en la categoría Cargador para dispositivo móvil. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
user manual
Symbols explanation:
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change
in any way. In the reason of using the power supply for other purposes than those described,
the product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
EC
BOX
Ecological Solutions
GREEN
ATX power supplies
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
www.akyga.com
In case of replacement of an old unit:
źDisconnect all power plugs from the computer
źRemove the computer housing
źDisconnect all power connectors of the old PSU
źUnscrew 4 screws holding the old PSU on the back of the computer
Installation of new Power Supply:
źScrew new power supply to the case using 4 screws
źConnect power connectors of a new PSU to suitable devices inside of the computer
źPlease remember that power connectors are intended for assembly in one particular way,
if there are problems with connection of plug and connector then reverse it and try again.
źMake sure that there are no loose screws left inside the computer
źPut on and tighten the computer case
źConnect the power cord plug to an electrical outlet
Power Supply Instalation guide
Safety Precautions
WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power
supply, do not place it in restricted ventilation area. Also, do not allow the working power supply to touch
soft surface such as pillows, blankets or clothing. The power supplies meets the limits on the surface
temperatures available to the user, as defined in the International Standard for Safety of Information
Technology Equipment (IEC 60950).
page 1
page 2
Connecting PC whose demanded power is greather than power of the power supply, can cause battery
failure or even damage (burn) of power supply.
An electrostatic discharge occurs when two object touch each other, for example, an electric
charge that occurs when user touch metal door handle after walking on a carpet . Discharging
electrostatic charges from fingers or other electrostatic conductors can dameage electronic
components. To avaid damaging the computer, avoid touching electrical outlets, wires and
electonic circuits. The user’s contact with electronic components should be kept to a minimum.
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
źKeep the product and the packaging out of range of children and animals. The package
includes a foil that child could choke while playing.
źIt is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or
crushing may cause its damage.
źThe product operation in adverse conditions is not allowed. Adverse conditions are primarily:
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
źIf the product has been damaged, does not work properly or has been stored for a long period
of time in bad or unfavorable conditions, safe operation of the device is not possible. It is
essential to stop using the product and to protect it against re-use for security purposes.
źProduct and power cord should not be touched with moist or wet hands under no
circumstances.
źShort-circuiting the current connection is prohibited.
źMake sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or
mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away
from heat sources (such as stoves, radiators, fireplaces).
źPower cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.
źIts forbidden to modify the power cord. In the case of modifications, the cable may be
damaged, causing threats to life, health and property.
źBefore connecting the adapter to the socket (the cable is not included with the AK-B1-XXX
power supply) make sure that the voltage specified on the mains adapter matches the voltage
supplied to the household socket.
źDisconnect the mains plug from the socket if you do not use the product for a long time.
źWhen disconnecting the power cord from the socket and from the device, do not pull on the
cord, but only on the part of the cable plug provided for this purpose.
źIn case of any doubts regarding operation, safety or connection of the product, please contact
the Manufacturer or a qualified specialist for this purpose.
źAll maintenance, adjustment and repair work on the product may only be carried out by a
qualified person in a specialist facility.
user manual
ATX power supplies
Product manufacturer: Ropla Computers sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór

Especificaciones del producto

Marca: Akyga
Categoría: Cargador para dispositivo móvil
Modelo: AK-I1-200

¿Necesitas ayuda?

Si necesitas ayuda con Akyga AK-I1-200 haz una pregunta a continuación y otros usuarios te responderán


Cargador para dispositivo móvil Akyga Manuales

Akyga

Akyga AK-B1-700 Manual de Usario

4 Septiembre 2024
Akyga

Akyga AK-I1-200 Manual de Usario

4 Septiembre 2024
Akyga

Akyga AK-B1-500E Manual de Usario

4 Septiembre 2024

Cargador para dispositivo móvil Manuales

Últimos Cargador para dispositivo móvil Manuales

Tripp Lite

Tripp Lite CSC32USBW Manual de Usario

20 Octubre 2024
Anker

Anker PowerCore+ 20100 USB-C Manual de Usario

16 Octubre 2024
Bauhn

Bauhn ACRWC-0424-M Manual de Usario

15 Octubre 2024
Bauhn

Bauhn AFTC3-0424-W Manual de Usario

15 Octubre 2024
Bauhn

Bauhn AFTC3-0424-B Manual de Usario

15 Octubre 2024
Bauhn

Bauhn ACRWC-0424-W Manual de Usario

15 Octubre 2024
Bauhn

Bauhn ADMWC-0224 Manual de Usario

15 Octubre 2024
Black Box

Black Box Deluxe UCCSM-10-30TP-HASP Manual de Usario

13 Octubre 2024
Trust

Trust 90W Notebook Power Adapter Manual de Usario

11 Octubre 2024
Black Box

Black Box Deluxe UCCSL-12-36HP Manual de Usario

10 Octubre 2024