ALM Stereo Sum Manual de Usario

ALM No categorizado Stereo Sum

Lee a continuación 📖 el manual en español para ALM Stereo Sum (1 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
The ‘Stereo Sum is a unity gain summing mixer that features four stereo input pairs summed as pairs to two independent mix outs or
all as a single combined mix. It is a useful utility for efficiently combining outputs of multiple stereo sources, such as the MEGA-TANG
and Jumble Henge mixers or multiple MFX returns. The inputs accept stereo or mono signals (via normalisation) which can be audio
or CV (module is DC coupled) and the top mixer’s outputs are normalised to the bottom mixer section meaning if the upper output is
left unpatched the two upper inputs will be added to the lower output.
STEREO MIX OUTPUT 2
Final stereo mix output.
STEREO MIX OUTPUT 1
Stereo mix output. Normalised to bottom mixer
section if ouput is left unpatched.
http://busycircuits.com/alm038
TECHNICAL SPECIFICATIONS
Power: +12V 8ma / -12V 8ma
Size: 4HP
Depth: 32mm
ALM038 / STEREO SUM
Limited Warranty
From the date of manufacture
this device is guaranteed for a
period of 2 years against any
manufacturing or material
defects. Any such defects will
be repaired or replaced at the
discretion of ALM. This does not
apply to;
•Physical damage arising from
mis treating (i.e dropping, sub-
merging, ‘modding’ etc).
•Damage caused by incorrect
power connections.
•Overexposure to heat or direct
sunlight.
•Damage caused by inappropri-
ate or misuse.
•Use of incorrect or non official
firmware
No responsibility is implied or
accepted for harm to person
or apparatus caused through
operation of this product. By
using this product you agree to
these terms.
Support
Need help? Email your questions
to help@busycircuits.com
For the latest news, additional
info, downloads and firmware
updates please visit the ALM
website at busycircuits.com
Follow @busycircuits on Twitter
and Instagram for news, tips and
ideas.
VisitALM TV’ on Youtube for
module video tutorials and
demos.
Module Installation
With your modular synth
powered , connect the 10 pin off
end of the supplied standard
eurorack power connector cable
to the 10 pin power connector on
the rear of the module.
The red stripe on the cable
should be orientated to match
the text ‘RED’ marked on the
rear of the module near the
power connector (this is -12V).
Connect the other 16 pin end of
the cable to your eurorack bus
board (Refer to your bus board
documentation for the correct
orientation).
You are now safe to power
up your modular synth. If the
module fails to power up, check
that you have the power cable
correctly orientated and have
carefully read the manual.
ALM038 manual version: 0.1
STEREO INPUT PAIRS
Stereo inputs. Can be used with audio or CV
(inputs are DC coupled).
Left ins normalised to Right for mono signals.
STEREO INPUT PAIRS
Stereo inputs. Can be used with audio or CV
(inputs are DC coupled).
Left ins normalised to Right for mono signals.
MIXER 2
MIXER 1

Especificaciones del producto

Marca: ALM
Categoría: No categorizado
Modelo: Stereo Sum

¿Necesitas ayuda?

Si necesitas ayuda con ALM Stereo Sum haz una pregunta a continuación y otros usuarios te responderán




No categorizado ALM Manuales

No categorizado Manuales

Últimos No categorizado Manuales