Alpine SGS-CH01 Manual de Usario

Alpine Cámara para salpicadero SGS-CH01

Lee a continuación 📖 el manual en español para Alpine SGS-CH01 (11 páginas) en la categoría Cámara para salpicadero. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/11
Jeep/Chrysler/Dodge
SGS-CH01 1/11z
Jeep Wrangler
SGS-CH01
Factory Radio Camera Interface
with Active Guideline system
Installation Manual
z Model: Wrangler
z Model Year: 2011-2018 Model Year Active Guidlines Static Guidelines
Jeep Wrangler (JK) 2007-2010
Wrangler (JK) 2011-2018
Note
zDesign and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
zThe installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
zBefore you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
zThis manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Caution Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
DISCLAIMER: The active guideline feature of this product is calibrated for use with JEEP WRANGLER model years
2011-2018. The accuracy of the active guideline system cannot be guaranteed if used in conjunction with other
vehicles or those which contain non-factory parts which may affect the turning radius of the vehicle.
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
zCongratulations on purchasing the SGS-CH01. This installation manual is designed to take you through the
installation of SGS-CH01. Please familiarize yourself with the owners manual and if you still have additional
questions please call 1-800-TECH-101.
Jeep/Chrysler/Dodge
SGS-CH01 2/11z
Types of Precautions
Forbidden
Indicates actions that are
forbidden (must not be performed)
Forbidden
Indicates that disassembly is
forbidden.
Mandatory
Indicates actions that are
mandatory (must be performed)
Marks content that should receive
your full attention.
Warning
Do not disassemble or modify the product.
Doing so could lead to an accident, fire, or
electric shock.
Store screws and other small objects
where small children cannot reach them.
If one of these small objects is swal-
lowed, consult with a doctor immediately.
When replacing fuses, be sure to
use fuses with the specified current
rating. Failing to do so could lead to
an accident or fire.
Only connect the product to a 12 VDC
negative ground car. Failing to do so could
lead to an accident or fire.
Before you begin wiring, remove the
ground wire from the negative terminal of
the battery. Failing to do so could lead to
electric shock or injury.
Do not cut the insulation on a cord and take
power from another device. Doing so could
lead to fire or electric shock.
Do not install the product in a location
where it will obstruct the driver’s forward
view; interfere with the operation of the
steering wheel, gearshift, or the like; or
pose a threat to passengers. Doing so could
lead to an accident or injury.
When making a hole in the vehicle body, be
careful to avoid damaging pipes, the fuel
tank, electrical wiring, and the like. This
kind of damage could lead to an accident
or fire.
When installing and grounding the product,
do not use any of the bolts or nuts of the
steering wheel, brakes, fuel tank, or the
like. Doing so could make the brakes stop
working or lead to fire.
Do not install the product near the
passenger-side airbag. Doing so could
interfere with the operation of the airbag
and lead to an accident or injury.
Bundle cords so that they don’t interfere
with driving. Wrapping cords around the
steering wheel, gearshift, brake pedal,
or the like, could lead to an accident or
damage equipment.
Caution
Connect the product properly according to
the instructions. Failing to do so could lead
to fire or an accident.
Do not sandwich cords between the seat
railing or allow them to touch protrusions.
Resulting breaks or shorts could lead to
electric shock or fire.
Do not block vents or heat sinks. Doing so
could lead to fire or damage equipment.
Use the accessories according to the
instructions, and attach them securely.
Failing to do so could lead to an accident
or damage equipment.
Do not install the product where it may be
exposed to water or in a place with high
levels of humidity or dust. Doing so could
lead to fire or damage equipment.
The installation and wiring of this product
requires specialized skills and experience.
Have the product installed by an Alpine
authorized dealer.
Forbidden
Forbidden Mandatory
Mandatory
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Jeep/Chrysler/Dodge
SGS-CH01 3/11z
Tools Possibly Required (This Will Vary Depending On The Vehicle)
Panel Removing Tool Sockets Phillips Screwdriver
Wire Cutters Extension Ratchet
Crimpers Pliers Torx Screwdriver
Accessory List
Installation Kit Parts
Interface Module Camera Harness Main Harness
CAM TRIG
Cable Ties x 2 Velcro x 2
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.

Especificaciones del producto

Marca: Alpine
Categoría: Cámara para salpicadero
Modelo: SGS-CH01

¿Necesitas ayuda?

Si necesitas ayuda con Alpine SGS-CH01 haz una pregunta a continuación y otros usuarios te responderán


Cámara para salpicadero Alpine Manuales

Alpine

Alpine KCX-C2600B Manual de Usario

8 Octubre 2024
Alpine

Alpine KCX-C250MC Manual de Usario

30 Septiembre 2024
Alpine

Alpine KCX-C200B Manual de Usario

22 Septiembre 2024
Alpine

Alpine DVR-C310R Manual de Usario

11 Agosto 2024
Alpine

Alpine HCE-C252RD Manual de Usario

6 Agosto 2024
Alpine

Alpine SGS-CH01 Manual de Usario

5 Agosto 2024
Alpine

Alpine DVR-F800PRO Manual de Usario

29 Julio 2024
Alpine

Alpine DVR-F200 Manual de Usario

27 Julio 2024

Cámara para salpicadero Manuales

Últimos Cámara para salpicadero Manuales

Cobra

Cobra SC 250R Manual de Usario

26 Octubre 2024
Cobra

Cobra SC 220C Manual de Usario

26 Octubre 2024
Hikvision

Hikvision AE-DC5313-C6PRO Manual de Usario

26 Octubre 2024
Minolta

Minolta MNCD406X Manual de Usario

25 Octubre 2024
JVC

JVC KV-DR305W Manual de Usario

15 Octubre 2024
Blaupunkt

Blaupunkt BP 3.1A Manual de Usario

15 Octubre 2024
Mio

Mio MiVue Mirror R30 Manual de Usario

14 Octubre 2024
Uniden

Uniden Dash View 50R Manual de Usario

9 Octubre 2024
Cobra

Cobra SC200 Manual de Usario

4 Octubre 2024
Caliber

Caliber CAM701 Manual de Usario

3 Octubre 2024