Altec Lansing inMotion iM600 Manual de Usario

Altec Lansing Base/estación de acoplamiento inMotion iM600

Lee a continuación 📖 el manual en español para Altec Lansing inMotion iM600 (8 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
User’s guide
2
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Caution: To prevent the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
C P C OONNECTING THE OWER ORD (AC WALL UTLET)
Snap plug into power supply and then insert the blades into the outlet.
RECHARGEABLE BATTERY
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type. Do not expose to excessive heat such as sunshine, fire, or the like.
The battery used in this product must be recycled or properly disposed of. Instructions for
removing the battery can be found in the “Power” section. Please contact your local recycling
center for proper handling of the battery.
Rated voltage: 3.7V Capacity: 2150mAh Type number: NTA2455
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water — This apparatus shall not be exposed to dripping
or splashing, and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions. The apparatus should not be situated on a bed, sofa, rug or similar surface
that may block the ventilation openings. The apparatus must not be placed in a built-in
installation, such as a closed bookcase or cabinet that may impede the flow of air
through the ventilation openings. Ventilation should not be impeded by covering the
openings with items such as newspapers, tablecloths, curtains, etc.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. No naked flame sources, such as lighted candles, should be placed on the apparatus.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
the replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched — particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
12. Do not install in an area which impedes the access to the power plug. Disconnecting the
power plug is the only way to completely remove power to the product and must be
readily accessible at all times.
13. Power source — Use only power supplies of the type specified in the operating
instructions or as marked on the appliance. If a separate power supply is included with
this apparatus, do not substitute with any other power supply — use only manufacturer-
provided power supplies.
14. Unplug this apparatus during lightning storms or when unused for long periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped. For service, refer to
qualified service personnel, return to the dealer, or call the Altec Lansing service line for
assistance.
16. For products which incorporate batteries, please refer to local regulations for proper
battery disposal.
17. Only use attachments/accessories specified by the manufacturer.
18. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
ALTEC EAR IMITEDLANSING ONE Y L WARRANTY
(TWO-YEAR L W I T EIMITED ARRANTY N HE UROPEAN UNION AND ASIA)
What Does The Warranty Cover?: Altec Lansing warrants that its products shall be free from
defects in materials or workmanship, with the exceptions stated below.
What Is The Period Of Coverage?: For units purchased in European Union or Asia, this
warranty runs for two years from the date of purchase. For units not purchased in Europe or
Asia, this warranty runs for one year from the date of purchase. The term of any warranties
implied by law shall expire when your limited warranty expires. Some states and/or Member
States in the European Union do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you.
What Does The Warranty Not Cover?: This warranty does not cover any defect, malfunction or
failure that occurs as a result of: improper installation; misuse or failure to follow the product
directions; abuse; or use with improper, unintended or faulty equipment. (For information on
proper installation, operation and use consult the manual supplied with the product. If you
require a replacement manual, you may download a manual from www.alteclansing.com.)
Also, consequential and incidental damages are not recoverable under this warranty. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
What Will Altec Lansing Do To Correct The Problem?: Altec Lansing will, at its option, repair or
replace any product that proves to be defective in material or workmanship. If your product is
no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your
product with a similar or better Altec Lansing product.
How To Get Warranty Service: To get a covered product repaired or replaced, you must contact
Altec Lansing during the warranty period by email (csupport@alteclansing.com). You must
include in your email, your name, address, email address, telephone number, date of purchase
and a complete description of the problem you are experiencing. In the United States, you may
alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 — please be prepared to
provide the same information. If the problem appears to be related to a defect in material or
workmanship, Altec Lansing will provide you a return authorization and instructions for return
shipment. Return shipments shall be at the customer’s expense, and the return must be
accompanied by the original proof of purchase. You should insure the shipment as appropriate
because you are responsible for the product until it arrives at Altec Lansing.
How Will State Law Affect Your Rights?: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. Please note that in the
European Union, you as a consumer might have other legal rights under national legislation of
European Union Member States governing the sale of Altec Lansing’s goods. Those rights are
not affected by this guarantee.
The above limited warranties and remedies are sole warranties and remedies available to
purchaser, if, and to the extent, valid and enforceable under the applicable law.
C SUSTOMER ERVICE
The answers to most setup and performance questions can be found in the Troubleshooting
guide. You can also consult the FAQs in the customer support section of our Web site at
www.alteclansing.com. If you live in North America and still can’t find the information you
need, please call our customer service team for assistance before returning the speakers to
your retailer under their return policy.
Tel: 800-258-3288
Email: csupport@alteclansing.com
If you live outside of North America, please visit our website at www.alteclansing.com and
select your region to locate your country’s distributor.
For the most up-to-date information, be sure to check our Web site at www.alteclansing.com.
INTERNATIONAL DISTRIBUTION
International customers: For information regarding the distribution of Altec Lansing products
in your country, please visit and click on your region.www.alteclansing.com
D O EISPOSAL OF LD LECTRICAL & ELECTRONIC EQUIPMENT
This symbol on the product or on its packaging indicates that this product shall not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials will help to
conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office or your household waste disposal service.
CAUTION
To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle
or other outlet unless the blades can be fully inserted to prevent blade exposure.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
3
INMOTION IM600
DIGITAL SPEAKER YSTEM FOR IS POD
®
The New Standard from the Company
that Set the Standard
Thank you for purchasing the Altec Lansing iM600
digital speaker system for iPod. When Altec Lansing
introduced the original inMotion, it set new standards
for sound and size and let a whole lot of music out of
the iPod. Today, the new iM600 raises the bar again
with an innovative and performance-leading design.
Box Contents
• inMotion iM600 mobile speaker system
• Wireless remote
• Power supply
• User’s guide and quick connect instructions
Made for:
• iPod touch
• iPod classic
• iPod with video
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPod with color display
• iPod mini
• iPod with dock connector
Placing the INMotion IM600
Open the inMotion iM600 by pressing the button on
the front of the speaker system. Position the inMotion
iM600 on a level surface, preferably close to you (within
three feet).
Assembling the INMotion IM600
Dock your iPod by sliding your iPod on top of the iM600
docking station. If necessary, first install the docking
adapter that came with your iPod. While the docking
adapter is not required for proper functioning of your
iPod and iM600, it will provide a better fit.
Note: Alternate audio sources—such as non-dockable
iPod models, CD players, MP3 players, portable DVD
players, and laptops—can also be connected to the
inMotion iM600. For more information, see the
“Connecting to alternate audio source” section.
Power
Use one of the following two options to power your
inMotion iM600:
AC (Wall outlet) Power
Insert the barrel connector from the power supply into
the DC connector on the rear of the inMotion iM600.
After this connection is made, insert the power supply
into a wall outlet.
DC (Battery) Power
The inMotion iM600 features a built-in rechargeable
Lithium-ion battery.
Charging time up to 3 hours
Continuous Playing Time up to 5 hours
Charging the rechargeable battery:
The battery should be fully charged before initial use.
To recharge the battery, insert the barrel connector
from the power supply into the DC connector on the
rear of the inMotion iM600. After this connection is
made, insert the power supply into a wall outlet. The
indicator light turns on. When the battery is fully
recharged, the indicator light turns off.
When the battery icon on the LCD screen displays a
single segment the battery should be recharged.
When the icon starts flashing, the iM600 is about to
shut down.
Warning: During the recharging process it is typical for
the battery to become warm. To be safe, keep
flammable materials away from the inMotion iM600.
Note: To conserve battery power, reduce the inMotion
iM600 volume level.
Disconnecting the rechargeable battery:
1. Unplug the inMotion iM600 from the wall outlet.
2. Open the inMotion iM600 by pressing the button on
the front of the speaker system.
3. Remove the rechargeable battery compartment cover
by removing the 2 screws.
4. Unplug the battery and remove it.
Start Playing
1. Turn on your iPod.
2. Turn on the inMotion iM600 by pushing the
button. The indicator light turns on.
3. Press the SOURCE button until “iPod” is displayed on
the LCD screen.
Note: To avoid hearing a popping sound when you turn
on your inMotion iM600, always turn on your audio
source first.
Power Off
Turn off the inMotion iM600 by pushing the button.
The indicator light shuts off.
Auto Shut-down
During battery-only operation the inMotion iM600
automatically shuts down if no audio is detected for
four minutes. Press the button to turn the inMotion
iM600 back on.
NOTE: The Auto Shut-down feature is active during
battery-only operation. If the AC wall adapter is used,
the inMotion iM600 will remain on until the button
is pushed and the indicator light shuts off.

Especificaciones del producto

Marca: Altec Lansing
Categoría: Base/estación de acoplamiento
Modelo: inMotion iM600

¿Necesitas ayuda?

Si necesitas ayuda con Altec Lansing inMotion iM600 haz una pregunta a continuación y otros usuarios te responderán


Base/estación de acoplamiento Altec Lansing Manuales

Altec Lansing

Altec Lansing Orbit-M IMT207 Manual de Usario

29 Agosto 2024
Altec Lansing

Altec Lansing iM413 Manual de Usario

28 Agosto 2024
Altec Lansing

Altec Lansing Orbit M IMT237 Manual de Usario

28 Agosto 2024
Altec Lansing

Altec Lansing inMotion Max IMT702EAM Manual de Usario

27 Agosto 2024
Altec Lansing

Altec Lansing LIFEJACKET 2 Manual de Usario

27 Agosto 2024
Altec Lansing

Altec Lansing Moondance Glow M402 Manual de Usario

26 Agosto 2024
Altec Lansing

Altec Lansing inMotion iM600 Manual de Usario

26 Agosto 2024
Altec Lansing

Altec Lansing InMotion Max IM702 Manual de Usario

26 Agosto 2024
Altec Lansing

Altec Lansing Nobi iMT217 Manual de Usario

25 Agosto 2024
Altec Lansing

Altec Lansing inMotion Manual de Usario

25 Agosto 2024

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales

Pyle

Pyle PHST92IBK Manual de Usario

20 Octubre 2024
Roberts

Roberts R100 Manual de Usario

19 Octubre 2024
Yamaha

Yamaha ISX-800 Manual de Usario

17 Octubre 2024
Polk

Polk BOOM Bit Manual de Usario

16 Octubre 2024
Vorago

Vorago KSP-600 Manual de Usario

8 Octubre 2024
IDance

IDance Mini Blaster 2L Manual de Usario

7 Octubre 2024
Pyle

Pyle PWPBT05BL Manual de Usario

5 Octubre 2024
Ewent

Ewent EW7018 Manual de Usario

5 Octubre 2024
Jam

Jam Splash Manual de Usario

5 Octubre 2024
Denver

Denver BTG-615 Manual de Usario

5 Octubre 2024