Aluratek AMAP01F Manual de Usario

Aluratek purificador de aire AMAP01F

Lee a continuación 📖 el manual en español para Aluratek AMAP01F (2 páginas) en la categoría purificador de aire. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
Air Inlet
Sensor Air Outlet
Operation Panel
Air Quality Indicator
Filter Reminder
Air Quality
Timer Setting
Sleep
Timer Power
Speed
Open directly from the side
Speed Setting
qsg Q10607 Copyright © 2022 Aluratek, Inc. All Rights Reserved.
model AMAP01F
Quick Start Guide
HEPA H13 with PM2.5 Monitor
Air Purifier
Filter
Package Contents
Your order has been carefully packaged and inspected.
The following accessories should be included in your
package. Please inspect the contents of the package to
ensure that you have received all items and that nothing
has been damaged. If you discover a problem, please
contact us immediately for assistance.
Product Highlights Operation Operation
Filter Installation Purifier Instructions
Operation
Purifier Instructions
Operation
Filter maintenance WARNING!!! This equipment has been tested and
found to comply with the limits of a Class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by whatever measures may be
required to correct the interference.
Radio and TV Interference Statement Technical Support and Warranty
If you need further assistance, please contact the
Aluratek support department for troubleshooting
prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect
in material or workmanship for 1 YEAR
from the date of purchase.
For more information, please visit:
https://aluratek.com/warranty-return-policy
You can register your product online at:
https://aluratek.com/product-registration
1. Remove the air inlet cover
2. Remove the filter
3. Remove the plastic bag from the filter and reinsert
4. Replace the air inlet cover
After the purifier is plugged in to a wall outlet, you will hear
a single beep with the display lights up for a second, then
it will go to standby mode where the display will be off with
the power button light up in red.
Air Quality indicator:
Green good means air quality
Yellow moderate means air quality
Red bad means air quality.
This purifier uses a Hepa Carbon filter. It is suggested to
be replaced every two months.
After a run time of 1500 hours, the purifier’s replacement
filter icon will light up.
• Place the filter in a ventilated place
• Do not expose to excessive sunlight
• Do not wash the filter with water
• Unplug the power plug before replacing the filter,
cleaning and maintenance
• Do not operate with the filter removed as this may cause
equipment failure
• Unplug the power cord when the purifier is idle for a long
period of time
To power on the purifier, press the power
button, the display will light up and the
purifier will enter auto mode.
When the purifier is on, you can press the
timer button to set the timer between 1-8
hours. You can verify the timer is set when
you see the timer icon lit on the display.
The timer can be cancelled by press and
hold the timer button for about 3 seconds.
You can change the speed of the fan by
pressing the fan icon to change between
auto (A), slow (1), medium (2), fast (4)
and sleep (SLE).
For Sleep mode, the fan speed will
change to slow with the display turned off
except the sleep icon. To exit sleep mode,
just touch the screen and change the fan
speed to other settings.
When the filter reminder icon is lit, please
change the filter. Once the filter is replaced,
during standby mode, press and hold the
filter button to reset the filter life counter.
To power off the purifier, press the power
button, the display will turn off and the
power button will light up in red.
Power
Timer
Speed
Sleep
Reset
Power
OFF

Especificaciones del producto

Marca: Aluratek
Categoría: purificador de aire
Modelo: AMAP01F

¿Necesitas ayuda?

Si necesitas ayuda con Aluratek AMAP01F haz una pregunta a continuación y otros usuarios te responderán


purificador de aire Aluratek Manuales

Aluratek

Aluratek AMAP01F Manual de Usario

26 Agosto 2024

purificador de aire Manuales

Últimos purificador de aire Manuales

Homedics

Homedics AR-20 Manual de Usario

27 Octubre 2024
LightAir

LightAir IonFlow Signature Manual de Usario

27 Octubre 2024
Electrolux

Electrolux Well A7 WA71-302GY Manual de Usario

23 Octubre 2024
Lanaform

Lanaform LA120209 Manual de Usario

18 Octubre 2024
Sharp

Sharp FPJ30EUB Manual de Usario

17 Octubre 2024
Vicks

Vicks V1800 Manual de Usario

17 Octubre 2024
Vicks

Vicks V790 Manual de Usario

17 Octubre 2024
Trotec

Trotec TAC 5000 Manual de Usario

16 Octubre 2024
Duux

Duux DXPU07 Bright Manual de Usario

16 Octubre 2024
Ulsonix

Ulsonix AIRCLEAN 20G Manual de Usario

15 Octubre 2024