Ambrogio 4.0 Elite Manual de Usario
Ambrogio
Cortacésped
4.0 Elite
Lee a continuación 📖 el manual en español para Ambrogio 4.0 Elite (36 páginas) en la categoría Cortacésped. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/36
1User’s manual
EN
TABLE OF CONTENTS
General information. ................................................................................................................................................................... 2
Purpose of the manual. ............................................................................................................................................................... 2
Identication of manufacturer and equipment. ............................................................................................................................ 3
Safety information. ...................................................................................................................................................................... 3
Safety regulations. ...................................................................................................................................................................... 3
Safety devices. ............................................................................................................................................................................ 4
Safety signals. ............................................................................................................................................................................. 5
Technical information. ................................................................................................................................................................ 6
Technical specications............................................................................................................................................................... 6
General description of the appliance........................................................................................................................................... 7
Main parts . ................................................................................................................................................................................. 8
Installation. ................................................................................................................................................................................... 9
Packing and unpacking. .............................................................................................................................................................. 9
Planning of system installation. ................................................................................................................................................... 9
Setting up of the perimeter wire. ................................................................................................................................................11
Re-entry method to the charging station. ...................................................................................................................................11
Setup of the robot’s quick re-entry to the charging station. ....................................................................................................... 12
Preparation and marking the boundaries of the work areas. .................................................................................................... 13
Installation of perimeter wire. .................................................................................................................................................... 17
Installation of the charging station and power supply unit......................................................................................................... 18
Adjustments. .............................................................................................................................................................................. 20
Adjustment recommendations................................................................................................................................................... 20
Adjustment of cutting height. ..................................................................................................................................................... 20
Use and operation. .................................................................................................................................................................... 21
Requirements for use. ............................................................................................................................................................... 21
Description of control panel and menu overview....................................................................................................................... 21
Initial setup. ............................................................................................................................................................................... 23
Menu access. ............................................................................................................................................................................ 23
Menu settings – programming mode......................................................................................................................................... 24
Initial start up – automatic mode. .............................................................................................................................................. 28
Robot safety stop. ..................................................................................................................................................................... 28
Use of the robot in closed areas with no charging station......................................................................................................... 29
Visualising the display during the work phase. ......................................................................................................................... 30
Prolonged inactivity and restarting. ........................................................................................................................................... 30
Battery charging after prolonged inactivity. ............................................................................................................................... 31
Operating tips. ........................................................................................................................................................................... 31
Routine maintenance. ............................................................................................................................................................... 32
Maintenance recommandations. ............................................................................................................................................... 32
Scheduled maintenance table. .................................................................................................................................................. 32
Robot cleaning. ......................................................................................................................................................................... 33
Troubleshooting. ....................................................................................................................................................................... 34
Troubleshooting guide. ............................................................................................................................................................. 34
Part replacement. ...................................................................................................................................................................... 37
Recommendations for replacing parts. ..................................................................................................................................... 37
Battery replacement. ................................................................................................................................................................. 37
Blade replacement. ................................................................................................................................................................... 37
Robot disposal. ......................................................................................................................................................................... 38
Ec declaration of conformity. ................................................................................................................................................... 39
Warranty rules. .......................................................................................................................................................................... 40
Conditions and limitations. ........................................................................................................................................................ 40
How to request warranty service. .............................................................................................................................................. 40
Additional denitions. ................................................................................................................................................................ 40
Reproduction, even partial, of this document without written permission by the manufacturer is strictly forbidden. The
manufacturer assumes a policy of continual improvement and reserves the right to modify this document without prior notice
on condition that the changes do not constitute health and safety risks.
© 2008 – Text, illustrations and page layout by Tipolito La Zecca. The text may be reproduced, in whole or in part, on condition
that the author is mentioned.
MD-CT-RO-15-R1.3 - EN - 10-2020
3User’s manual
EN
IDENTIFICATION OF MANUFACTURER AND EQUIPMENT
The nameplate shown here is applied directly onto the appliance.
It contains references and all the information essential for safely
operating the device.
For any technical requirements, please contact the Manufacturer’s
Technical Service Centre or an authorised dealer.
For technical assistance, please indicate the data reported on the
identication plate, the approximate hours of use and the type of
fault detected.
A. Name of manufacturer.
B. CE conformity label.
C. Model and Version / serial number / manufacturing year.
D. Technical data: voltage, current, protection rating, mass,
cutting width.
Serial Number :
Manufactured byXxxxxxxxxxxxxxxxxx, Xxxxxxxxxxxxxxxxx
XXXXX (XX) - XXXXXxxxxxxxxxxxxxxxxxxxxxxx
XXXXXXXXXXXXXX
MODEL TYPE MFG
(C) Manufacturing year
(C) Model
(B) EC conformity
label
(A) Name of manufacturer
(D) Technical
specifications
(C) Serial
number
DATA PLATE
(C) Version
SAFETY INFORMATION
The manufacturer carefully considered the possible hazards and personal risks that may result from interacting with the
equipment. The purpose of this information is to inform users on the need to use extreme caution in order to avoid risks.
SAFETY REGULATIONS
THIS PRODUCT COMES WITH A BLADE AND IS NOT A TOY!
• Please read the manual carefully, especially the safety instructions, and make sure you
understand them fully before using the product. Only use the equipment for the purposes
specically intended by the manufacturer. Carefully follow the instructions on operation,
maintenance and repair.
• When using the robot, make sure there is no one in the working area, in particular children, the
elderly or disabled and pets. Otherwise, program the robot to operate during hours when there
is no one in this area. Keep an eye on the robot if you know that pets, children or other people
are in the area. If a person or animal is found on the robot’s path, stop it immediately.
• In working areas not bounded by a fence that can not be easily climbed over, supervise the
device during the operation.
• Warning signs shall be placed around the working area of the robotic lawnmower if it is used
in public areas. The signs shall have the following text: "Warning! Automatic lawnmower!
Keep away from the machine! Supervise children!"
• This robot is not suitable for use by children and people with reduced physical, sensory or
mental capabilities or inexperienced people who are not familiar with the product, unless they
are supervised by a person responsible for their safety or have received instructions on how
to use the appliance. Children should be supervised to ensure that they do not play with the
appliance.
• Do not allow the robot to be used by people who do not know how it works.
• Operators who perform maintenance and repair work must be fully conversant with its special
features and safety regulations. Before using the robot, carefully read the operating manual and
make sure you understand the instructions.
• Never remove, bypass or tamper with the safety devices installed. The Manufacturer shall not
be held liable if non-original spare parts are used. Failure to comply with this requirement may
seriously endanger the health and safety of people.
4
User’s manual
EN
• Check that there are no toys, tools, branches, clothing or other objects on the lawn which
can damage the blades. Any objects on the lawn can also damage or prevent the correct
functioning of the robot.
• Never allow people to sit on the robot. Never lift the robot to inspect the blade or to carry it while
it is running. Do not place hands and feet under the robot when it is in operation.
• Do not use the robot when a sprinkler system is running. In this case, program the robot and
the sprinkler system so that they do not operate at the same time. Do not wash the robot with
high-pressure water jets and do not immerse it in water, partially or completely, as it is not
watertight.
• Disconnect the power supply and activate the safety device before performing any adjustment
or maintenance that the user is authorised to perform. Use the personal protection devices
recommended by the Manufacturer, in particular, always wear protective gloves when handling
the cutting blade.
• Cleaning and maintenance must not be performed by unsupervised children.
• Do not use the robot when the cutting blade is damaged. Replace the cutting blade.
• Do not use the robot with damaged external parts. If the mechanical parts of the robot are
damaged, replace them.
• Do not use the robot if the power cord of the transformer is damaged. A damaged cord can lead
to contact with live parts. To avoid any risk, have the cord replaced by the manufacturer or by
its technical service centre or by a person with similar qualications.
• If the power cord is damaged during use, press “STOP” to stop the robot and disconnect the
power cord from the electrical socket.
• Visually check the robot regularly to make sure the blade, mounting screws and cutting
mechanism are not worn or damaged. Make sure that all the nuts, bolts and screws are
tightened to ensure that the robot is in good working condition.
• If the robot starts to vibrate abnormally during use, press “STOP” and disconnect the power
cord from the electrical socket.
• Never use and recharge the robot in explosive and/or ammable environments.
• Only use the battery charger and power supply unit supplied by the manufacturer. Improper
use may cause electric shocks, overheating or leakage of corrosive liquids from the battery.
If any liquid leaks, wash the battery with water/neutraliser; in case of contact with eyes, seek
medical attention.
SAFETY DEVICES
1. Obstacle detector
The bumper sensor is activated if the robot strikes a solid object greater than 10 cm (3.94 ") in height, which stops the movement
in that direction and moves backwards to avoid the obstacle.
2. Inclinometer
If the robot works on a slope which is steeper than the maximum limit, or tips over, the robot will stop the cutting blade.
3. Emergency stop switch
Located on the upper part of the robot with the word "STOP" larger than the other commands on the keypad. Pressing this button
at any time during operation will immediately stop the movement of the lawn mower robot and the rotation of the blade will stop.
4. Over-current protection
Each motor (blade and wheels) is monitored continuously during operation for any situation that may cause them to overheat. If
this occurs in the wheel motor, the robot will attempt to move in the opposite direction. If the over-current persists, the robot will
stop and signal an error. If the cutting blade motor overheats, there are two intervention ranges. If the parameters fall within the
rst range, the robot will perform the manoeuvres to unblock the cutting blade. If the over-current is below the protection range,
the robot will stop and signal a motor error.
5. No signal sensor
If there is no signal, the robot will automatically stop.
Especificaciones del producto
| Marca: | Ambrogio |
| Categoría: | Cortacésped |
| Modelo: | 4.0 Elite |
¿Necesitas ayuda?
Si necesitas ayuda con Ambrogio 4.0 Elite haz una pregunta a continuación y otros usuarios te responderán
Cortacésped Ambrogio Manuales
16 Julio 2024
16 Julio 2024
Cortacésped Manuales
- Cortacésped Bosch
- Cortacésped Braun
- Cortacésped Philips
- Cortacésped Panasonic
- Cortacésped DeWalt
- Cortacésped Karcher
- Cortacésped Medion
- Cortacésped WOLF-Garten
- Cortacésped Adler
- Cortacésped Al-ko
- Cortacésped Alpina
- Cortacésped AS Motor
- Cortacésped Ashiko
- Cortacésped Ferm
- Cortacésped Sabo
- Cortacésped Orbegozo
- Cortacésped Princess
- Cortacésped Ozito
- Cortacésped Gude
- Cortacésped Walker
- Cortacésped Makita
- Cortacésped Draper
- Cortacésped Saturn
- Cortacésped Black And Decker
- Cortacésped Tristar
- Cortacésped Trisa
- Cortacésped Vonroc
- Cortacésped Remington
- Cortacésped ACG
- Cortacésped Rowenta
- Cortacésped Skil
- Cortacésped Hyundai
- Cortacésped BaByliss
- Cortacésped ECG
- Cortacésped Ryobi
- Cortacésped Jata
- Cortacésped Florabest
- Cortacésped Scarlett
- Cortacésped Clatronic
- Cortacésped Conair
- Cortacésped Parkside
- Cortacésped Worx
- Cortacésped Meec Tools
- Cortacésped Sun Joe
- Cortacésped Mesko
- Cortacésped Sovereign
- Cortacésped Eldom
- Cortacésped Einhell
- Cortacésped Gardena
- Cortacésped Baumr-AG
- Cortacésped Yard Force
- Cortacésped Robomow
- Cortacésped Ferrex
- Cortacésped Husqvarna
- Cortacésped Flymo
- Cortacésped Kubota
- Cortacésped Viking
- Cortacésped Zelmer
- Cortacésped Hustler
- Cortacésped Craftsman
- Cortacésped Snow Joe
- Cortacésped Powerplus
- Cortacésped Stiga
- Cortacésped Cotech
- Cortacésped Wahl
- Cortacésped Troy-Bilt
- Cortacésped Camry
- Cortacésped Topcraft
- Cortacésped Texas
- Cortacésped Spear & Jackson
- Cortacésped Scheppach
- Cortacésped Honda
- Cortacésped John Deere
- Cortacésped McCulloch
- Cortacésped Sterwins
- Cortacésped Aqua Joe
- Cortacésped Kress
- Cortacésped Stihl
- Cortacésped Bavaria
- Cortacésped Dolmar
- Cortacésped Rover
- Cortacésped McGregor
- Cortacésped Zipper
- Cortacésped Greenworks
- Cortacésped Fieldmann
- Cortacésped Hecht
- Cortacésped Qualcast
- Cortacésped Varo
- Cortacésped Fuxtec
- Cortacésped IKRA
- Cortacésped JCB
- Cortacésped Masport
- Cortacésped Grizzly
- Cortacésped Solo
- Cortacésped GA.MA
- Cortacésped VARI
- Cortacésped Valera
- Cortacésped Hayter
- Cortacésped Cecotec
- Cortacésped Gianni Ferrari
- Cortacésped Ariens
- Cortacésped Grouw
- Cortacésped Segway
- Cortacésped Toolcraft
- Cortacésped Lumag
- Cortacésped Toro
- Cortacésped Gardenline
- Cortacésped McConnel
- Cortacésped Park
- Cortacésped Snapper
- Cortacésped MTD
- Cortacésped Levita
- Cortacésped Efco
- Cortacésped Blackline
- Cortacésped Brill
- Cortacésped Plantiflor
- Cortacésped Scotts
- Cortacésped Chapin
- Cortacésped Germania
- Cortacésped Anova
- Cortacésped PLUS
- Cortacésped Graphite
- Cortacésped NEO Tools
- Cortacésped LEA
- Cortacésped Stabilo
- Cortacésped Jonsered
- Cortacésped Do It Garden
- Cortacésped OKAY
- Cortacésped Victa
- Cortacésped Robust
- Cortacésped Shav
- Cortacésped LawnMaster
- Cortacésped Ergotools Pattfield
- Cortacésped G-Technology
- Cortacésped Morrison
- Cortacésped Cub Cadet
- Cortacésped Powerbase
- Cortacésped Bestgreen
- Cortacésped Garda
- Cortacésped CMI
- Cortacésped MacAllister
- Cortacésped Maxbear
- Cortacésped Yellow Garden Line
- Cortacésped Lawn Star
Últimos Cortacésped Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
23 Octubre 2024
22 Octubre 2024
22 Octubre 2024
21 Octubre 2024
21 Octubre 2024