Ampeg SVT-2 Pro Manual de Usario
Ampeg
amplificador
SVT-2 Pro
Lee a continuación 📖 el manual en español para Ampeg SVT-2 Pro (8 páginas) en la categoría amplificador. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
Owners Guide for the
Owners Guide for the
Ampeg
®
is Proudly Made in America
Ampeg
®
is Proudly Made in America
Bass Amplifier
Bass Amplifier
-15dB PAD
MUTE PEAK /
MUTE
ULTRA LO
BRIGHT
ULTRA HI
GRAPHIC EQ
MASTERTREBLEFREQUENCYMIDRANGEBASSDRIVEGAININPUT POWERSTANDBY
-12dB
0
+12dB
-10dB
0
+8dB
40Hz 90Hz 180Hz 300Hz 500Hz 1kHz 2kHz 4kHz 10kHz LEVEL
ACTIVE / PEAK
2
Important Safeguards and Precautions:
All Ampeg products are designed for continuous safe operation, as long as common sense is used and steps are taken to
help avoid certain problems. Abiding by the following rules can help prevent damage to your preamp, yourself and others.
•The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock,
NEVER remove or otherwise attempt to defeat the ground pin of the power cord.
•Connect the amplifier ONLY to a properly grounded AC outlet of the proper voltage for your amp.
•Avoid sudden temperature extremes, rain and moisture. Also, avoid sudden and intense impact. (If the unit
has been subjected to any of the preceding abuses, have it looked at by an authorized service center.)
•Never set the amplifier on a support that might give out under its weight.
•When using tall or stacked speaker cabinets, use them ONLY on a level surface. NEVER set tall or stacked
cabinets on a surface with more than a five degree incline since tipping or falling could occur, possibly caus-
ing serious injuries.
•Always keep the total speaker impedance at or above the rated load.
•Unplug the amplifier before cleaning it. NEVER spray liquid cleaners onto the amp. Wipe it with a slightly
dampened, lint-free cloth to remove dirt and film.
•Don’t use the amplifier if it has sustained damage to the chassis, controls, or power cord. Refer the unit to
an authorized service center for inspection.
•Amplifiers capable of producing high volume levels are also capable of inflicting permanent hearing loss or
damage, if the exposure to such levels is prolonged. Such damage is progressive and irreversible!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ATTENTION
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
ATTENTION: POUR REDUIRE D'ELECTROCUTION NE PAS
ENLEVER LE COUVERCLE. AUCUNE PIECE INTERNE N'EST REPRABLE
PAR L'UTILISATEUR. POUR TOUTE REPARATION, S'ADRESSER A UN
TECHNICIEN QUALIFIE.
VORSICHT
ELEKTRISCHE SCHLAGGEFAHR
NICHT OFFENEN
VORSICHT: ZUR MINIMIERUNG ELEKTRISCHER SCHLAGGEFAHR NICHT
DEN DECKEL ABENHMEN. INTERNE TEILE KONNEN NICHT VOM
BENUTZER GEWARTET WERDEN. DIE WARTUNG IS QUALIFIZIERTEM
WARTUNGSPERSONAL ZU UBERLASSEN.
THIS EQUIPMENT HAS BEEN DESIGNED AND ENGINEERED TO PROVIDE SAFE AND RELIABLE OPERATION. IN ORDER TO PROLONG THE LIFE OF THE UNIT AND PREVENT ACCIDEN-
TAL DAMAGES OR INJURY, PLEASE FOLLOW THESE PRECAUTIONARY GUIDELINES:
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN CHASSIS; DO NOT DEFEAT OR REMOVE THE GROUND PIN OF THE POWER CORD; CONNECT ONLY TO A PROP-
ERLY GROUNDED AC POWER OUTLET.
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT
HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME. The chart below shows the U.S.
Government Occupational Safety and Health Administration (OSHA) regulations which were in effect at the time of this publication for permissible noise exposure, per 29CRF1910, Table G-16.
According to OSHA, any exposure in excess of those listed above could result in some hearing loss.
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
"UNBEDINGT IN DER BEDIENUNGSANLEITUNG NACHSCHLAGEN"
EXPLANATION OF
GRAPHICAL SYMBOLS:
"DANGEROUS VOLTAGE"
"DANGER HAUTE TENSION"
"GEFAHLICHE SPANNUNG"
==
SOUND LEVEL dBA DURATION PER DAY
SLOW RESPONSE IN HOURS
90 8
92 6
95 4
97 3
100 2
SOUND LEVEL dBA DURATION PER DAY
SLOW RESPONSE IN HOURS
102 1-1/2
105 1
110 1/2
115 1/4 or less
TABLE OF CONTENTS
Important Safeguards and Precautions . . . . . . . . . . . . . . .2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .3
The Front Panel Controls and Their Use . . . . . . . . . . . . . .4
The Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Some Suggested Settings . . . . . . . . . . . . . . . . . . . . . . . . .6
Changing the Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Setting Tube Bias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .back cover
Technical Specifications . . . . . . . . . . . . . . . . . . .back cover
SVT-2 PRO Bass Amplifier
3
An Introduction to your new Ampeg SVT-2 PRO Bass Amplifier
The harmonically rich sound and legendary performance of the AMPEG SVT are redefined in the SVT-2 PRO.
This dynamically powerful bass amplifier delivers a thundering 300 watts of unsurpassed quality, reliability and
tonal flexibility, offering the classic vibrancy of tubes as well as contemporary features.
All of the features and controls of your SVT-2 PRO are covered in detail within the pages of this owner’s
guide. We recommend going over them before you use the amplifier.
Features
In the world of high performance bass amps, Ampeg’s SVT amplifiers stand alone. Keeping with true Ampeg tra-
dition, the SVT-2 PRO Bass Amplifier offers you more performance and flexibility than any other amplifier in its
class. Listed below are some of the outstanding features of your new preamp - features which set it apart from the
competition! Additional information on these features can be found on the pages indicated.
•ATTENUATOR: A switchable input pad, this feature is perfect for basses with active electronics or
very “hot” pickups (page 4).
•MUTE SWITCH: Lets you cut the sound from the amp, letting you tune your bass in private (page 4).
• ULTRA LOW, ULTRA HIGH AND BRIGHT SWITCHES: Lets you tailor your sound in many different
ways “with the touch of a button” (page 4).
•5-POSITION MIDRANGE SELECTOR: Take your pick from the five center frequency points available
to get just the right midrange voice (page 4).
•9-BAND GRAPHIC EQ: Use as a “second channel” for bass solos, or to shape your sound to your own
exacting standards. An independent level control lets you adjust the Graphic EQ volume. Switchable at
front panel or with a footswitch (page 4).
•BIAS ADJUSTMENT CONTROLS: Let you adjust the tube bias for proper operation (pages 5,7).
•SLAVE OUT: Use for powering another amp from the SVT-2 PRO’s preamp (page 5).
System Block Diagram
SVT-2 PRO Bass Amplifier
GAIN
LEVEL
INPUT
-15dB PAD
BUFFER
TUNER
OUT
FREQUENCY
PEAK
LED
DRIVE MID
BRIGHT
EQ ON
ULTRA
LOW BASS TREBLE
ULTRA
HIGH
IMPEDANCE 4 OHMS
2 OHMS
MUTE PRE/POST
LEVEL
MASTER
BIAS
ADJUST
BALANCED
OUT
GRAPHIC
EQ
EFFECTS
SEND EFFECTS
RETURN
BUFFER
PREAMP
OUT POWER AMP
PROTECTION
SLAVE
OUT
1/4" JACK
1/4" JACK
SPEAKON
®
JACK SPEAKER
OUTPUTS
PWR AMP
INPUT
PWR AMP
POWER
STDBY
FAULT BIAS
INDICATORS
1+
2+
1- 2-
GRAPHIC
EQ
MUTE FOOTSWITCH
SWITCHING
CIRCUIT
Especificaciones del producto
| Marca: | Ampeg |
| Categoría: | amplificador |
| Modelo: | SVT-2 Pro |
¿Necesitas ayuda?
Si necesitas ayuda con Ampeg SVT-2 Pro haz una pregunta a continuación y otros usuarios te responderán
amplificador Ampeg Manuales
16 Julio 2024
14 Julio 2024
amplificador Manuales
- amplificador Kenwood
- amplificador Onkyo
- amplificador Pioneer
- amplificador Yamaha
- amplificador AB International
- amplificador Advance Acoustic
- amplificador Arcam
- amplificador Amplicom
- amplificador Alto Professional
- amplificador American Audio
- amplificador Nedis
- amplificador Pyle
- amplificador NAD
- amplificador Harman Kardon
- amplificador Hifonics
- amplificador Marquant
- amplificador Fenton
- amplificador Marantz
- amplificador Marshall
- amplificador Auna
- amplificador Samson
- amplificador Iriver
- amplificador Hartke
- amplificador Skytec
- amplificador Luxman
- amplificador Tangent
- amplificador Power Dynamics
- amplificador Monacor
- amplificador DAP Audio
- amplificador Bluetech
- amplificador Naim
- amplificador Peavy
- amplificador Koda
- amplificador Konig Electronic
- amplificador Engl
Últimos amplificador Manuales
19 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
22 Septiembre 2024
18 Septiembre 2024
11 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024