AmpliVox SW225 Manual de Usario

Lee a continuación 📖 el manual en español para AmpliVox SW225 (6 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
User Guide
SW225
Voice Projector Powered Speaker with Internal
16 Channel UHF Wireless Receiver and Amplifier
Thank you for choosing the from SW225 Wireless Powered Speaker System AmpliVox Portable Sound
Systems.
We are excited in introducing this truly unique system. Our system combines flexibility with functionality.
Please refer to this user guide as you enjoy the unique capabilities of another quality product from AmpliVox
Portable Sound Systems.
We encourage you to visit our website to register your product for its warranty coverage, www.ampli.com
sign up to receive our newsletter, download our catalog, and learn more about the complete line of AmpliVox
audio visual products, including portable PA systems, and lecterns.
AmpliVox 650 Anthony Trail Suite D, Northbrook, IL 60062 Phone: (800)267- Fax: (800)267-5489 www.ampli.com 5486
2
IMPORTANT SAFETY INSTRUCTIONS
Before using this product, read the instruction manual for important safety information. Please retain this manual for
future reference and warranty information.
Troubleshooting & Servicing
Do not attempt to service or repair the device yourself. Refer all servicing to qualified service personnel. Do not at-
tempt to modify the device in anyway. Doing so could invalidate your warranty.
Cleaning
When cleaning the device, please use a soft, dry cloth. Never use benzene, paint thinner, or other chemicals on the -
device.
Location
Place the device in stable location, so it will not fall causing damage to the device or bodily harm.
Intended use
The product may only be used with the original parts intended for it. The intended use includes adherence to the speci-
fied installation instructions. The manufacturer accepts no liability for damage arising due to improper use.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance instructions in this owner’s guide.
IMPORTANT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ-
ing interference that may cause undesired operation.
The unit’s circuitry may cause interference to nearby radios. To prevent interference, either switch the unit off or move
away from the affected radio.
NOTE: This equipment complies within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
NOTE: Shielded cables may be required to be used with this unit to en sure compliance with the Class B FCC limits.-
3
DO NOT MIX BATTERY TYPES OR
ATTEMPT TO RECHARGE ALKA-
LINE BATTERIES. EQUIPMENT
DAMAGE, SAFETY HAZARD OR
FIRE COULD RESULT.
R EMOVE BATTERIES THE UNIT NOT GOING IF IS TO
BE USED FOR LONG PERIODS TIME PREVENT OF TO
LEAKAGE.
SW225 Wireless Voice Projector: Unit runs on
AC power or battery power. The battery carriage
holds 10 D cell alkaline batteries (not included) or -
Amplivox optional S1465 NiCad Battery Pack
(Fig.4) (requires S1460 AC adapter to recharge.
Fig. 4). Or run on a 12 Volt DC adapter (automotive
cigarette lighter plug in, not included)-.
Loosen four thumbscrews (Fig 2) and remove bat-
tery door from back of speaker. Remove battery
carriage (Fig 3). Insert 10 D cell alkaline batteries, -
observing polarity, or replace with the S1465 NiCad
battery pack. Carefully replace the battery carriage.
Reposition battery door and fasten the thumb-
screws.
Note: The battery holder cable comes from the
factory already plugged into the connector. If it
comes loose, push it in securely. (Turn the plug
over if it doesn’t fit; it only fits one way.)
If using the S 1465 NiCad Battery pack (Fig 3), -
Plug AC Adapter/ Recharger power supply (S1460)
into the jack on front panel of the amp. “DC IN”
Plug into a working electrical outlet. Charge 24
hours for full charge before using.
Wireless Transmitter
The transmitter bodypacks is operated by 1 "AA" -
alkaline battery. Before use, install battery as
shown (Fig. 5). Make certain the battery is fully
seated in its compartment so the cover slides in
place easily. Battery life with alkaline batteries is
approximately 8 hours of operating time.
When LED on top panel turns to the battery RED
should be replaced immediately.
Fig 5
Fig 4
Fig 2
Fig 1
S 1465 S 1460- -
BATTERY INSTALLATION / SET-UP
Fig 3

Especificaciones del producto

Marca: AmpliVox
Categoría: Vocero
Modelo: SW225

¿Necesitas ayuda?

Si necesitas ayuda con AmpliVox SW225 haz una pregunta a continuación y otros usuarios te responderán




Vocero AmpliVox Manuales

Vocero Manuales

Últimos Vocero Manuales