AMX NXA-TTS43X Manual de Usario
AMX
soporte de panel plano
NXA-TTS43X
Lee a continuación 📖 el manual en español para AMX NXA-TTS43X (2 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Installation Guide
TTS Secure Surface Mounting / Alternate Cable Routing
Overview
Each of the TTS Table-Top Stands features a Cable Knockout and three mounting
holes on the bottom panel that allow you to provide a secure surface-mount
installation.
When surface mounting the TTS, all cabling will enter the TTS enclosure through the
knockout on the bottom panel, using strain relief inside the enclosure (FIG. 1).
Note that in this type of installation, the rear panel connectors on the TTS are not
used, since the cables entering the enclosure through the bottom panel connect
directly to the Touch Panel, Keypad(s) or ControlPad installed in the Table-Top Stand.
Strain Relief Accessories
Included with each TTS Table-Top Stand is a cable Strain Relief and Strain Relief
Bracket that mount inside the TTS enclosure:
Cable Strain Relief (45-0004-04)
The Cable Strain Relief (FIG. 2) mounts onto the cable.
Strain Relief Bracket (62-1800-06)
The Strain Relief Bracket (FIG. 3) mounts to the bottom panel of the TTS enclosure,
using the center mounting hole.
Note that the screw that secures the Strain Relief Bracket also serves as one of three
mounting screws that secure the TTS enclosure to the mounting surface.
Preparing the Mounting Surface
1. Establish the desired location and position for the installation.
Refer to FIG. 4 and FIG. 5 for the dimensions of the bottom panel and the
location of the three mounting holes.
The mounting holes are 0.166” (4.22 mm). See “Mounting Specifications” for
details.
2. Drill three mounting holes into the surface.
Mounting Specifications
The following illustrations provide detailed dimensions of the bottom panel of the TTS
Enclosures.
NXA-TTS43X-BL and NXA-TTS500-BL
The NXA-TTS43X-BL and NXA-TTS500-BL share the same TTS enclosure (FIG. 4):
MET-TTS1/2/3-BL and AP-TTS16-BL
The MET-TTS1/2/3-BL and AP-TTS16-BL share the same TTS enclosure (FIG. 5):
FIG. 1 Cable Knockout, Strain Relief and Surface Mounting Holes on TTS Enclosures
FIG. 2 Cable Strain Relief (45-0004-04)
FIG. 3 Strain Relief Bracket (62-1800-06)
Cable Strain Relief
Cable Strain Relief Bracket
Cable Knockout
(shown with knockout removed)
Surface Mounting Holes
Mounting screw passes
through the Bracket to
secure the TTS enclosure
to the mounting surface
(see Fig. 1)
Cable with Cable Strain
Relief mounts here
FIG. 4 Bottom panel specifications - NXA-TTS43X-BL and NXA-TTS500-BL
FIG. 5 Bottom panel specifications - MET-TTS123-BL and AP-TTS16-BL
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
1/10
©2010 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-2261-10 REV: A
Secure Surface-Mounting
1. Use a flat-head screwdriver to remove the rubber feet.
Note that two of the surface mounting holes are located beneath the two rear
rubber feet (FIG. 6).
2. Use a flat-head screwdriver to remove the Cable Knockout from the bottom
panel.
3. Position the TTS enclosure in the desired installation location.
4. Use the two rear mounting holes to secure the TTS enclosure to the mounting
surface.
5. Run all device cable(s) through the Cable Knockout.
6. Install the Cable Strain Relief (FIG. 2) on the cable(s).
7. Install the cable with Cable Strain Relief into the Strain Relief Bracket.
8. Install the Strain Relief Bracket inside the enclosure.
The mounting screw that secures the Strain Relief Bracket to the TTS Enclosure
passes through the Strain Relief Bracket and serves as the third mounting
screw, completely securing the TTS enclosure to the surface.
9. Connect device cabling to the Touch Panel, Keypad(s) or ControlPad,
depending on the type of TTS installed.
Note: Refer to the Operation/Reference Guide for the device being installed for
cabling and connection details.
10. Install the Panel, Keypad(s) or ControlPad as described in the TTS Installation
Guides.
Detailed Dimensions of TTS Enclosures
The following illustrations provide detailed dimensions for the TTS enclosures:
NXA-TTS43X-BL and NXA-TTS500-BL
The NXA-TTS43X-BL and NXA-TTS500-BL share the same TTS enclosure (FIG. 7):
MET-TTS1/2/3-BL and AP-TTS16-BL
The MET-TTS1/2/3-BL and AP-TTS16-BL share the same TTS enclosure (FIG. 5):
Additional Documentation
Refer to the Installation Guide specific to the TTS Table-Top Stand that you are
installing for detailed instructions on installing the Touch Panel, Keypad(s) or
ControlPad into the TTS Enclosure:
• AP-TTS16-BL Installation Guide
• MET-TTS123-BL Installation Guide
• NXA-TTS43X-BL Installation Guide
• NXA-TTS500-BL Installation Guide
FIG. 6 Bottom Panel (bottom view)
FIG. 7 Enclosure Dimensions - NXA-TTS43X-BL and NXA-TTS500-BL
(rear)
Surface Mounting holes are
hidden beneath the rear pair
Surface Mounting holes
Cable knockout
The Strain Relief Bracket
(mounted inside the enclosure)
also uses this mounting hole
(front)
of rubber feet
FIG. 8 Enclosure Dimensions - MET-TTS123-BL and AP-TTS16-BL
Especificaciones del producto
| Marca: | AMX |
| Categoría: | soporte de panel plano |
| Modelo: | NXA-TTS43X |
¿Necesitas ayuda?
Si necesitas ayuda con AMX NXA-TTS43X haz una pregunta a continuación y otros usuarios te responderán
soporte de panel plano AMX Manuales
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
soporte de panel plano Manuales
- soporte de panel plano Samsung
- soporte de panel plano HP
- soporte de panel plano Abus
- soporte de panel plano Acco
- soporte de panel plano Hitachi
- soporte de panel plano SilverStone
- soporte de panel plano 3M
- soporte de panel plano GPX
- soporte de panel plano Vision
- soporte de panel plano Kensington
- soporte de panel plano Nec
- soporte de panel plano BlueBuilt
- soporte de panel plano Da-Lite
- soporte de panel plano Luxor
- soporte de panel plano Steren
- soporte de panel plano Digitus
- soporte de panel plano Insignia
- soporte de panel plano Sanus
- soporte de panel plano Peerless-AV
- soporte de panel plano Vogels
- soporte de panel plano Fellowes
- soporte de panel plano Sven
- soporte de panel plano Valueline
- soporte de panel plano One For All
- soporte de panel plano Newstar
- soporte de panel plano Ewent
- soporte de panel plano BakkerElkhuizen
- soporte de panel plano Ultimate
- soporte de panel plano Proaim
- soporte de panel plano Monoprice
- soporte de panel plano Chief
- soporte de panel plano Ergotron
- soporte de panel plano Gabor
- soporte de panel plano Atdec
- soporte de panel plano StarTech.com
- soporte de panel plano SIIG
- soporte de panel plano B-tech
- soporte de panel plano Speaka
- soporte de panel plano Crimson
- soporte de panel plano Kogan
- soporte de panel plano Schwaiger
- soporte de panel plano Cabstone
- soporte de panel plano V7
- soporte de panel plano SmartMetals
- soporte de panel plano Unicol
- soporte de panel plano Zaor
- soporte de panel plano Multibrackets
- soporte de panel plano Rocstor
- soporte de panel plano CTA Digital
- soporte de panel plano Avteq
- soporte de panel plano Walker Edison
- soporte de panel plano My Wall
- soporte de panel plano Mount-It!
- soporte de panel plano LTN Technologies
- soporte de panel plano Heckler
- soporte de panel plano Helder
Últimos soporte de panel plano Manuales
27 Octubre 2024
15 Octubre 2024
15 Octubre 2024
4 Octubre 2024
2 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024