Analog Way RK-350 Manual de Usario

Analog Way No categorizado RK-350

Lee a continuaciรณn ๐Ÿ“– el manual en espaรฑol para Analog Way RK-350 (4 pรกginas) en la categorรญa No categorizado. Esta guรญa fue รบtil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Pรกgina 1/4
RK-350 - Ref. RK-350
QUICK START GUIDE
Thank you for choosing Analog Way and the RK-350. By following these simple steps, you should be able
to setup and use your powerful remote Control Keypad within minutes. Discover the extensive RK-350
capabili๎žŸes and intui๎žŸve interface while con๎œฎguring your ๎œฎrst show, and unleash your crea๎žŸvity for a new
experience in show and event management by Analog Way.
โ€ข 1 x RK-350 (RK-350)
โ€ข 1 x Power supply cord
โ€ข 1 x DB9 (M/F) cable
โ€ข 1 x Carrying case
โ€ข 1 x Quick Start guide*
* The Quick Start guide is also available on www.analogway.com
WHATโ€™S IN THE BOX
RK-350 SETTINGS
โ€ข The RK-350 automa๎žŸcally detects the right versions of
the product to control. Connect the DB9 cable supplied
or an Ethernet crossover cable using the same protocol
as the connected unit.
โ€ข To control the following Seamless Switchers:
Control Mode Seamless
Mixer
Seamless
Matrix Quadravision
EKS550 x x x
QMX150 x
SMX250 x
QVU150 x
PLS350 x x
SPX450 x x
Naviga๎žŸon Menu:
To access the menu, press the RK-350 EXIT/MENU bu๎žฉon
in the control sec๎žŸon. To highlight items in the menu which
will appear on the VFD screen, turn the scroll knob le๎Œ or
right to the desired menu item. When you have reached
the desired menu item, press the ENTER bu๎žฉon in the
control sec๎žŸon to access that menu func๎žŸon.
Pressing the ENTER bu๎žฉon when a selec๎žŸon has been made
sets the value to that selec๎žŸon in the RK-350 memory.
When all se๎žซngs have been made, press the EXIT/MENU
bu๎žฉon to exit sub-menus and return to the main menu.
IMPORTANT: simply selec๎žŸng a menu item will not set
it to that value. Be sure to press the ENTER bu๎žฉon when
parametering the menu items.
Once you have connected your to your switcher, RK-350
con๎œฎgure the connec๎žŸon se๎žซngs on both devices.
For a serial connec๎žŸon, select RS232 from the RS232/LAN
menu on both devices. (In menu)CONTROL
For a LAN connec๎žŸon, select LAN from the RS232/LAN menu
on both devices (In CONTROL menu), and con๎œฎgure each
device with a unique IP in the LAN setup > RK-350 address
menu. The default IP on the is . RK-350 192.168.2.141
Next, enter the IP of the device you wish to control in the
Lan Setup > Device address menu.
Once your se๎žซngs are correct, the RK-350 will begin
to synchronize with the device, and you will be ready to
begin. (Wait a minute).
Bu๎žฉon color usage:
Solid red:
#1 = Source is on the Program output
#2 = Freeze enable
#3 = Stand-by bu๎žฉon
#4 = Mute enable
Solid green:
Solid orange:
Blinking red:
Blinking green:
#1 = Source is on Preview
#2 = Func๎žŸon available for modi๎œฎca๎žŸon
Unlocked sources / Shi๎Œed keys
Layer/source selected or is currently ac๎žŸve
on the Program output
Layer/source selected or is not currently
ac๎žŸve on the Program output
Go on our website to register your product(s)
and be no๎žŸ๎œฎed about new ๎œฎrmware versions:
h๎žฉp://bit.ly/AW-Register
๎™š๎˜ผ๎ฅณ๎งฏ๎งฑ๎งฌ๎˜ƒ๎ฅณ๎˜ƒ๎™š๎˜œ๎˜ฆ๎ฅ˜๎˜ƒ๎™š๎˜ผ๎ฅณ๎งฏ๎งฑ๎งฌ๎˜ƒ๎ฅฌ๎˜ƒ๎˜ฆ๎™š๎™‹๎™…๎™ค๎˜ƒ๎™—๎˜„๎™…๎˜œ๎˜พ๎˜ƒ๎˜˜๎˜œ๎™ž๎˜’๎™š๎˜ฏ๎™—๎™ค๎˜ฏ๎™‹๎™…
Bu๎žฉons and func๎žŸons are available according to the unit wich is controlled.
๎˜พ๎œ‚๎Ÿ‡๎œž๎žŒ๎ฅ—
๎˜ฆ๎žŒ๎œ‚๎ต๎œž๎ฅ— select the Frame layer
๎˜พ๎œ‚๎Ÿ‡๎œž๎žŒ๎˜ƒ๎˜„๎ฅฌ๎˜‘๎ฅฌ๎˜’๎ฅ— select the layer A to C
๎˜พ๎ฝ๎๎ฝ๎˜ƒ๎งญ๎ฅฌ๎งฎ๎ฅ— select the logo 1 to 2
๎™™๎žต๎๎œ๎ฌ๎˜ƒ๎˜ฆ๎žŒ๎œ‚๎ต๎œž๎ฅ—๎˜ƒal
๎™ž๎š๎ฝ๎žŒ๎žš๎œ๎žต๎žš๎ฅ—
๎™ž๎š๎๎Œ๎ฅ— secondary func๎žŸon selec๎žŸon bu๎žฉon
๎™ž๎Ÿ๎œ‚๎ž‰๎ฅ— exchange sources between layer A and layer B
๎™„๎ฝ๎ž๎œ‚๎๎œ๎˜ƒ๎™—๎žŒ๎œž๎Ÿ€๎๎œž๎Ÿ๎ฅ— Toggle standard or Mosaic mode when available
๎™ž๎ž‰๎ฏ๎๎žš๎˜ƒ๎™ž๎œ๎žŒ๎œž๎œž๎ถ๎ฅ— load a split screen preset
๎˜’๎ฝ๎ถ๎žš๎žŒ๎ฝ๎ฏ๎ฅ—
๎˜œ๎Ÿ†๎๎žš๎ฅฌ๎™„๎œž๎ถ๎žต๎ฅ— switch between
Status & Control mode. Exit
from menu.
๎˜œ๎ถ๎žš๎œž๎žŒ๎ฅ— validate the menu or
๎™ณ๎ฝ๎ฏ๎žต๎ต๎œž๎ฅ—
๎™„๎žต๎žš๎œž๎ฅ— toggles the audio mute on
Program. Bu๎žฉon illuminates in red
when volume is muted
๎™ณ๎ฝ๎ฏ๎žต๎ต๎œž๎ฅ— volume adjustment on
Program (adjust with the knob).
e has no e๎œซect
Centering*๎ฅ— centered (aspect ra๎žŸo preserved,
black bars around source)
๎™ฟ๎ฝ๎ฝ๎ต๎ฅ— con๎œฎgures the layer Zoom
๎˜ฆ๎žต๎ฏ๎ฏ ๎ฅ—๎˜ƒ
*fullscreen (aspect ra๎žŸo may be distorted)
๎™ž๎๎ŸŒ๎œž๎ฅ— resize the ac๎žŸve layer with the mini joys๎žŸck (shortcut
to size menu)
Crop*๎ฅ— cropped (aspect ra๎žŸo preserved, extra image
cropped)
๎™—๎ฝ๎ž๎ฅ˜๎ฅ— adjust layer or logo posi๎žŸon with the mini joys๎žŸck
(shortcut to pos. menu)
๎™š๎œ‚๎žŸ๎ฝ ๎ฅ—๎˜ƒ
*set the layer height to the selected aspect ra๎žŸo
๎™™๎žต๎œ‚๎œš๎žŒ๎œ‚๎Ÿ€๎๎ž๎๎ฝ๎ถ๎ฅ—
Available when controlling a device
which o๎œซers Quadravision
๎™ด๎งญ๎ฅฌ๎™ด๎งฎ๎ฅฌ๎™ด๎งฏ๎ฅฌ๎™ด๎งฐ๎ฅ—๎˜ƒchange the ac๎žŸve layer
into the Window #1 to #4
๎˜œ๎œซ๎œž๎œ๎žš๎ฅ—
๎˜’๎žต๎žš๎ฅ— select Cut as the current transi๎žŸon type.
๎˜ฆ๎œ‚๎œš๎œž๎ฅ— select Fade as the current transi๎žŸon type.
User 1/User 2/User 3 /User 4
* *๎ฅ— select the custo-
mized transi๎žŸon con๎œฎgured in the Control menu.
P1/P2/P3/P4/P5 /P6 /P7 /P8
****๎ฅ— Select P1 to
P8 as a customized preset
๎™‹๎žต๎žš๎ž‰๎žต๎žš๎˜ƒ๎ฆท๎งญ๎ฅ—๎˜ƒselect Output #1, select a layer
and a source then press TAKE
๎™‹๎žต๎žš๎ž‰๎žต๎žš๎˜ƒ๎ฆท๎งฎ๎ฅ—๎˜ƒselect Output #2, select a layer
and a source then press TAKE
๎™—๎ฝ๎ž๎๎žŸ๎ฝ๎ถ๎ฅ— easy adjustments (size or posi๎žŸon)
with this mini joys๎žŸck.
Adjust the selected layer or Logo, X-Axis
(Le๎Œ/Right), Y-Axis (Up/Down) and click to
change the mode (posi๎žŸon or size)
๎™ค๎˜„๎˜ผ๎˜œ๎ฅ— transi๎žŸon the pre-
selected sources onto the
Program output with the
selected e๎œซects
๎œž๎ž‰๎˜ƒ ๎˜‘๎œ‚๎œ๎ฌ๎ฅ— recall the
t preset into your
eview monitor
๎™ค๎ฅฒ๎˜‘๎œ‚๎žŒ๎ฅ—๎˜ƒmini T-Bar to
control e๎œซect level
๎˜ฏ๎ถ๎ž‰๎žต๎žš๎˜ƒ๎ž๎œž๎ฏ๎œž๎œ๎žŸ๎ฝ๎ถ๎ฅ—
๎ฆท๎งญ๎ฅฌ๎˜พ๎ฅ˜๎˜ฆ๎˜ƒ๎งญ๎ฅ— access so
๎ฆท๎งฎ๎ฅฌ๎˜พ๎ฅ˜๎˜ฆ๎˜ƒ๎งฎ๎ฅ— access source #2, Frame #2 or Logo #2
๎ฆท๎งฏ๎ฅฌ๎˜พ๎ฅ˜๎˜ฆ๎˜ƒ๎งฏ๎ฅ— access source #3, Frame #3 or Logo #3
๎ฆท๎งฐ๎ฅฌ๎˜พ๎ฅ˜๎˜ฆ๎˜ƒ๎งฐ๎ฅ— access source #4, Frame #4 or Logo #4
๎™ž๎˜˜๎˜ฏ๎˜ƒ๎งญ๎ฅฌ๎˜พ๎ฅ˜๎˜ฆ๎˜ƒ๎งฑ๎ฅ— access SDI #1, Frame #5 or Logo #5
๎™ž๎˜˜๎˜ฏ๎˜ƒ๎งฎ๎ฅฌ๎˜พ๎ฅ˜๎˜ฆ๎˜ƒ๎งฒ๎ฅ— access SDI #2, Frame #6 or Logo #6
๎™ž๎˜˜๎˜ฏ๎˜ƒ๎งฏ๎ฅฌ๎˜พ๎ฅ˜๎˜ฆ๎˜ƒ๎งณ๎ฅ— access SDI #3, Frame #7 or Logo #7
๎™ž๎˜˜๎˜ฏ๎˜ƒ๎งฐ๎ฅฌ๎˜„๎ฅฌ๎˜พ๎ฅ˜๎˜ฆ๎˜ƒ๎งด๎ฅ— access SDI #4, Frame #8, Logo #8 or animated logo
๎˜ฌ๎˜˜๎™„๎˜ฏ๎˜ƒ๎งญ๎ฅฌ๎งฎ๎ฅ— access HDMI 1 or HDMI 2
๎˜ฆ๎žŒ๎œž๎œž๎ŸŒ๎œž๎ฅ— freeze the input linked to the current layer on Program
๎˜‘๎ฏ๎œ‚๎œ๎ฌ๎ฅ— clear the layer
*accessible via the Shi๎Œ key
MENU TREE
๎™š๎˜ผ๎ฅณ๎งฏ๎งฑ๎งฌ๎˜ƒ๎˜’๎™‹๎™…๎™ค๎™š๎™‹๎˜พ VERSIONS
CONNECTION
๎™ณ๎˜œ๎™š๎™ž๎ฅ—๎˜ƒ๎งญ๎ฅ˜๎งฌ๎ฅ˜๎งฌ
๎™ณ๎˜„๎™š๎˜ฏ๎˜„๎˜‘๎˜พ๎˜œ๎˜ƒ๎™ž๎˜œ๎™ค๎˜ƒ๎ฅ—๎˜ƒ๎งญ
๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ๎ฅณ
MR.OWL
๎™„๎˜„๎˜ฏ๎™…๎˜ƒ๎™„๎˜ฏ๎˜’๎™š๎™‹๎˜ƒ๎ฅ—
RS232/LAN
RS232 BAUD RATE
LAN SETUP
๎˜ฆ๎™š๎™‹๎™…๎™ค๎˜ƒ๎™—๎˜„๎™…๎˜œ๎˜พ KEY LOCKING
MATRIX TK MODE
PROG. KEYS
LCD BRIGHTNESS
KEY BRIGHTNESS
MENUS + KEYBOARD
TAKE BOTH
CUT
๎˜ฆ๎˜„๎˜˜๎˜œ
USER 1
USER 2
USER 3
USER 4
ONLY MENUS
TAKE CUR.SCREEN
RS232
LAN
1200 BAUDS
2400 BAUDS
9600 BAUDS
19200 BAUDS
57600 BAUDS
115200 BAUDS
TCP
UDP
RK350 ADDRESS
REMOTE ADDRESS
GATEWAY ADDRESS
RK350 PORT๎ฆˆ๎˜’๎งญ๎ฆ‰
REMOTE PORT
NETMASK
LAN UPDATE
๎ฆˆ๎˜’๎งฎ๎ฆ‰
๎˜˜๎˜œ๎˜ฆ๎˜„๎™จ๎˜พ๎™ค๎˜ƒ๎™ž๎˜œ๎™ค๎™จ๎™—
TYPE๎ฆˆ๎˜’๎งฏ๎ฆ‰
DIRECTION ๎ฆˆ๎˜’๎งฏ๎ฆ‰๎ฆˆ๎˜’๎งฐ๎ฆ‰
๎˜œ๎˜ฆ๎˜ฆ๎˜œ๎˜’๎™ค๎˜ƒ๎˜˜๎™จ๎™š๎˜„๎™ค๎˜ฏ๎™‹๎™…
RESET THE LAN
PARAMETERS?
๎ฅณ๎ฉ…๎™…๎™‹๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎™บ๎˜œ๎™ž
๎˜˜๎˜œ๎˜ฆ๎˜„๎™จ๎˜พ๎™ค๎˜ƒ๎™ž๎˜œ๎™ค๎™จ๎™—
STANDBY
UPDATE MODE
TECH. SUPPORT
Reset RK350
to its default values?
->NO YES
Enter standby
mode?
->NO YES
Enter update
mode?
->NO YES
THE AMERICAS
techsupport@analogwayusa.com
๎™ค๎˜œ๎˜พ๎ฅ—๎˜ƒ๎จฝ๎งญ๎˜ƒ๎งฎ๎งญ๎งฎ๎˜ƒ๎งฎ๎งฒ๎งต๎˜ƒ๎งญ๎งต๎งฌ๎งฎ
---------------------
EUROPE, MIDDLE EAST
๎˜„๎™…๎˜˜๎˜ƒ๎˜„๎˜ฆ๎™š๎˜ฏ๎˜’๎˜„
techsupport@analogway.com
๎™ค๎˜œ๎˜พ๎ฅ—๎˜ƒ๎จฝ๎งฏ๎งฏ๎ฅพ๎งฌ๎ฅฟ๎งญ๎งด๎งญ๎งด๎งต๎งฌ๎งด๎งณ๎งฒ
---------------------
๎˜„๎™ž๎˜ฏ๎˜„๎ฅ•๎˜ƒ๎™—๎˜„๎˜’๎˜ฏ๎˜ฆ๎˜ฏ๎˜’
techsupport@analogwayasia.com
๎™ค๎˜œ๎˜พ๎ฅ—๎˜ƒ๎จฝ๎งฒ๎งฑ๎˜ƒ๎งฒ๎งฎ๎งต๎งฎ๎˜ƒ๎งฑ๎งด๎งฌ๎งฌ
(C1) Only displayed in UDP
(C2) Only displayed in TCP
(C3) Displayed for User1, User2, User3 and User4
(C4) Displayed if the e๎œซect type is not Cut nor Fade

Especificaciones del producto

Marca: Analog Way
Categorรญa: No categorizado
Modelo: RK-350

ยฟNecesitas ayuda?

Si necesitas ayuda con Analog Way RK-350 haz una pregunta a continuaciรณn y otros usuarios te responderรกn


No categorizado Analog Way Manuales

Analog Way

Analog Way RK-350 Manual de Usario

17 Septiembre 2024

No categorizado Manuales

รšltimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024