Andis AGC2 Manual de Usario

Andis Cortacésped AGC2

Lee a continuación 📖 el manual en español para Andis AGC2 (20 páginas) en la categoría Cortacésped. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

USE AND CARE

MODEL AGC2

LITERATURE PACKET #04959

Item pictured may differ from actual product

El artículo ilustrado puede diferir del producto real

Il est possible que l’article sur la photo soit différent du produit réel

E N G L I S H

Congratulations – you just went first class when you bought this Andis

product. Careful workmanship and quality design have been the hallmarks of

Andis products since 1922.

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always

be followed, including the following: Read all instructions before

using the Andis clipper.

DANGER: To reduce the risk of electric shock:

1. Do not reach for an appliance that has fallen into water. Unplug

immediately.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can fall or be pulled into

a tub or sink. Do not place in or drop into water or other liquid.

4. Always unplug this appliance from the electrical outlet

immediately after using.

5. Unplug this appliance before cleaning, removing or assembling parts.

WARNING: To reduce the risk of burns, fire electric shock,

or injury to persons:

1. An appliance should never be left unattended when plugged in.

2. Close supervision is necessary when this appliance is used by, on

or near children or individuals with certain disabilities.

3. Use this appliance only for its intended use as described in this

manual. Do not use attachments not recommended by Andis.

4. Never operate this appliance if it has a damaged cord or plug, if it

is not working properly, if it has been dropped or damaged, or

dropped into water. Return the appliance to an Andis Authorized

Service Station for examination and repair.

5. Keep the cord away from heated surfaces.

6. Never drop or insert any object into any opening.

7. Do not use outdoors or operate where aerosol (spray) products

are being used or where oxygen is being administered.

8. Do not use this appliance with a damaged or broken blade or

comb, as injury to the skin may occur.

9. To disconnect turn control to “off” then remove plug from outlet.

10. WARNING: During use, do not place or leave appliance where it

may be (1) damaged by an animal or (2) exposed to the weather.

SAVE THESE INSTRUCTIONS

THIS PRODUCT INTENDED FOR PROFESSIONAL USE

To reduce the risk of electric shock, this appliance has a polarized plug (one

blade is wider than the other). This plug will fit in a polarized outlet only one

way. If the plug does not fit fully in the outlet, reverse the plug. If it still does

not fit, contact a qualified electrician to install the proper outlet. Do not change

the plug in any way.

OPERATING INSTRUCTIONS

Please read the following instructions before using your new Andis clipper. Give

it the care that a fine precision built instrument deserves and it will give you

years of service. Plug cord into electrical outlet, operate 120 volt, 60 cycle AC

electrical current or as noted on unit.

2-SPEED OPERATION

Your Andis clipper comes with normal and high speed operation (Diagram A).

Use the normal setting (setting #1) for most cutting needs. Use the high speed

setting (setting #2) for cutting through heavy hair. To start clipper move switch

button by pressing down on the lock mechanism and moving to the #1 or #2

position. To stop, press down on the lock mechanism and move switch button

back to original position. After using your Andis clipper, rewrap cord, and store

in a safe place.

REMOVING BLADE SET

To remove blade set, first make sure your clipper motor is switched “OFF”. Push

blade release mechanism under blade hinge (Diagram B). While holding down

the blade release mechanism, push down on blade, then gently pull the blade

forward (Diagram C), and slide it off the blade hinge. If your blade hinge should

snap closed and is flush with the clipper, use a small standard screwdriver to

pry the tongue of the hinge out (Diagram D). Hair may accumulate in the NOTE:

front cavity of the housing under the blade. If this happens, you can clean out

the hair by brushing out the cavity with a small brush or an old toothbrush while

the blade is off the clipper (See Diagram E for location of cavity being referenced).

Especificaciones del producto

Marca:	Andis
Categoría:	Cortacésped
Modelo:	AGC2
Peso.:	340 g
Fuente de alimentación:	12/48 VDC, 259.6 mA
Tecnología de conectividad:	Bedraad
Certificación:	EN 60601-1-2 B, EN55011
Interfaz:	RS-422/485
Conexiones:	2 x RS-422/485
Temperatura de almacenamiento:	-20 - 85 °C
Humedad de almacenamiento:	5 - 95 procent
Seguridad:	UL: UL60950-1, TÜV: EN60950-1
Tiempo medio entre fallos (MTBF):	102344 uur
Velocidad máxima de transferencia de datos:	0.2304 Mbit/s
Dimensiones (Ancho x Fondo x Alto):	67 x 100.4 x 22 mm
Emisiones electromagnéticas:	CE: EN55022/EN55024 A, FCC: FCC 15 BA
Temperatura de funcionamiento (TT):	0 - 55 °C
Humedad relativa de funcionamiento (VV):	5 - 95 procent
Protocolos de enlace de datos:	Ethernet, Fast Ethernet