Antec Signature 850 Manual de Usario

Antec Fuente de alimentación de la computadora Signature 850

Lee a continuación 📖 el manual en español para Antec Signature 850 (8 páginas) en la categoría Fuente de alimentación de la computadora. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

USER’S MANUAL

Antec Signature Series

SG-650 and SG-850 Power Supply

A New Level of Quality

The Signature Series is Antec’s premium line of high-end performance power supplies.

Combining cutting-edge technology, rigid testing, and impeccable style, the Signature

series is the ultimate choice in power supplies. Some of the design features in this

premium quality PSU have never been seen before in a consumer power supply.

Every Signature series power supply has been personally tested by our engineers,

and comes with a signed document guaranteeing its quality performance.

Standards and Features

The Signature Series Power Supply Unit (PSU) is compatible with ATX12V v2.3 and

EPS12V v2.91 specifications. The Signature PSU features Universal Input, which

automatically senses when you connect the power supply to any AC power source

between 100~240V without having to worry about setting a voltage switch.

This power supply also features Active PFC, which improves the power factor value of

the power supply by altering the input current wave shape and thus helps transmission

across the power grid.

Components and Design

Antec has selected only the best quality Japanese capacitors enhancing the unit’s

stability and increasing the MTBF of the Signature. The component choice has been

expanded by the use of two double-layer circuit boards, which allow for heavier-duty

components and more space between them for better airflow. The fan is a top-quality

Japanese made PWM fan.

DC to DC

The Signature uses DC-to-DC conversion for the 5V and 3.3V rails. The DC-to-DC Voltage

Regulation module is the most advanced design, usually found on high-end motherboards,

to step down DC voltage. This module operates at 85% efficiency, as opposed to a

traditional Magnetic Amplifiers that only operate at 75% efficiency. Another benefit is

that the transient response time is almost 100 times faster, to provide unbeatably stable

power output in response to changing loads.

System Protection

A variety of industrial-grade safety circuitry will help protect your computer: OVP (Over

Voltage Protection), SCP (Short Circuit Protection), and OCP (Over Current Protection).

Sometimes the PSU will “latch” into a protected state. This means that you will need to

clear the fault and turn the power off to the PSU before it will function again. There are

no user-replaceable fuses in your Signature Series PSU.

Special Quiet Computing™ PWM fan operation

Another innovation in your Signature is the introduction of pulse width modulation

(PWM) fan technology. A PWM fan can spin much more slowly and be quieter than a

voltage-controlled fan. The Signature uses a Japanese PWM fan that can spin as slow as

400 RPM or as fast as 4000 RPM, depending on load and ambient temperature. It should

be nearly inaudible when your computer is idling, and the Signature will vary the fan

speed depending on the load of your computer.

80 PLUS® Bronze Certification

80 PLUS® Certification is the latest independent standard in power supply efficiency.

This means that the PSU will generate less heat so it stays cooler, runs more quietly,

and lasts longer. The Signature series exceeds the basic 80 PLUS® standard and lowers

your operating costs while protecting the environment.

SLI Certification

Signature power supplies have been SLI Certified by NVIDIA Corporation for use with

pairs of high-end graphics cards for superior parallel graphics processing.

Advanced Hybrid Cable Management System

The Signature Series uses Advanced Hybrid Cable Management. Cables that are important

or mandatory are connected directly to the PSU. There are also modular connectors on

the back of the PSU to add additional cables as needed. Using only the power cables

you need will reduce clutter and improve airflow inside your case. For the list of connected

and optional cables, see the following table.

Especificaciones del producto

Marca:	Antec
Categoría:	Fuente de alimentación de la computadora
Modelo:	Signature 850
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Buttons, Rotary
Color del producto:	Black, Silver, Stainless steel
Pantalla incorporada:	Nee
Temporizador:	Ja
Función de calentamiento:	Nee
Parrilla:	Nee
Cocinar por convección:	Ja
cocinar al vapor:	Nee
Función mantener caliente:	Nee
asador:	Nee
Manual de usuario:	Ja
Cocinar:	Ja
Horno de capacidad neta:	22 l
Calefacción superior e inferior:	Ja
Dimensiones de la bandeja para hornear:	Ja
Subcalentamiento:	Ja
Tipo temporizador:	Mechanisch
Pies antideslizantes:	Ja
Potencia del horno:	1600 W
Duración del temporizador:	60 min
Rango de termostato:	0 - 230 °C
Calefacción superior + convección (modo único):	Ja
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Agarre de la bandeja para hornear:	Ja
Material del elemento calefactor:	Roestvrijstaal
Número de elementos calefactores:	4