Antec SP1 Manual de Usario

Lee a continuación 📖 el manual en español para Antec SP1 (20 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/20
User Manual
Manuel d’ utilisation
Getting Started
Please fully charge SP1 before initial use. Connect the included
Micro-USB cable to your SP1 and a USB slot of any PC or Mac to
charge. The RED LED will turn on while charging and will turn off
when fully charged.
Push and hold the center button for 6-8 seconds until the LED
constantly flashes white. You are now in Pairing Mode. See your
phone/music device manual for pairing instructions.
Pairing Mode
EN
Volume down Volume up
Center Button
Troubleshooting
The device is malfunctioning
• Always check for proper charge and make sure that the device is On
The device is creating distortion or the sound quality is poor
• Lower the volume on the SP1 and increase the volume on your phone
or device
• Connect the SP1 directly to your device using the 3.5 mm cable
• Check the charge of the SP1 and your mobile audio device and recharge
if necessary
• Re-pair the devices using the instructions listed under the “Pairing
Mode” section
The SP1 fails to pair with Bluetooth enabled device
• Confirm that your device is Bluetooth compatible and that the Bluetooth
setting is enabled
• Re-pair the devices following the instructions listed under the “Pairing
Mode” section
The signal drops or connection fails in Bluetooth mode
• Move the SP1 closer to your mobile device
Answer/End Calls
Press the center button to answer and end calls.
To Make a Call
Use your phone to dial. Your SP1 will then function as a speakerphone.
EN

Especificaciones del producto

Marca: Antec
Categoría: Vocero
Modelo: SP1

¿Necesitas ayuda?

Si necesitas ayuda con Antec SP1 haz una pregunta a continuación y otros usuarios te responderán




Vocero Antec Manuales

Vocero Manuales

Últimos Vocero Manuales