Anthem AVM 90 Manual de Usario

Lee a continuación 📖 el manual en español para Anthem AVM 90 (66 páginas) en la categoría sistema de alta fidelidad. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/66
OPERATING MANUAL
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN
AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF UNINSULATED “DANGEROUS
VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE
OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
THE EXLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE, AND
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE
PLACED ON THIS APPARATUS.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF
FIRE, REPLACE THE FUSE ONLY WITH THE SAME AMPERAGE
AND VOLTAGE TYPE. REFER REPLACEMENT TO QUALIFIED
SERVICE PERSONNEL.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING: UNIT MAY BECOME HOT. ALWAYS PROVIDE
ADEQUATE VENTILATION TO ALLOW FOR COOLING. DO NOT
PLACE NEAR A HEAT SOURCE, OR IN SPACES THAT CAN
RESTRICT VENTILATION.
IMPORTANT SAFETY INSTRUCTIONS:
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including ampli ers) that
produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. When the provided
plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the point
where they exit from the apparatus.
Only use the attachments/accessories speci ed by the
manufacturer.
Use only with a cart, stand, tripod, bracket or table speci ed
by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to quali ed service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
WARENTY:
To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. Avoid installing this unit where
foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do
not place:
Burning objects (i.e. candles), as they may cause re, damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.
Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the
apparatus.
Do not install this equipment in a con ned space such as a case or similar. Install it away from direct sunlight, heat sources,
vibration, dust, moisture, and/or cold.
Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside
this unit rises, it may cause re, damage to this unit, and/or personal injury.
Install this unit near the AC outlet and where the AC power plug can be reached easily.
This unit is not disconnected from the AC power source when it is turned o . This state is called the standby mode. In this state,
this unit is designed to consume a very small quantity of power.
NOTE:
This product is not an auto voltage Ampli er. Connect only to the prescribed AC outlet, i.e., 120V 60Hz or 240V 50/60Hz.
CAUTION:
Top surface can become hot.
CAUTION:
These servicing instructions are for use by quali ed service personnel only. To reduce the risk of electric shock, do not perform
any servicing other than that contained in the operating instructions, unless you are quali ed to do so.
CAUTION:
Changes or modi cations to this equipment not expressly approved by Paradigm Electronics for compliance could void the user’s
authority to operate this equipment.
FCC WARNING:
Changes or modi cations not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and ampli er.
Connect the equipment into an outlet on a circuit di erent from that to which the ampli er is connected.ff fi
Consult the dealer or an experienced radio / TV technician for help.

Especificaciones del producto

Marca: Anthem
Categoría: sistema de alta fidelidad
Modelo: AVM 90
Color del producto: Black, White
Pantalla incorporada: Ja
Peso del embalaje: 1220 g
Ancho del embalaje: 235 mm
Empaquetadura en profundidad: 265 mm
Altura del embalaje: 150 mm
Manual de usuario: Ja
Material de la carcasa: Kunststof
tipo de iluminación: LED
Fuente-de-alimentación: AC
Actual: 1 A
Diagonal de la pantalla: 7 "
Formatos de vídeo soportados: AVI
Grabación de vídeo: Ja
Cables suministrados: AC, USB
Megapíxeles: 12 MP
Tipo de sensor de imagen: CMOS
Tamaño del sensor de imagen: 1/2.9 "
Zoom óptico: 50 x
balance de blancos: Handmatig
Formato de imagen soportado: JPEG
Cámara integrada: Ja
Contenidos del paquete: Ready-to-use microscope slides
Resolucion de la camara: 4032 x 3024 Pixels
pantalla a color: Ja
Ancho de la mesa: 120 mm
Control de brillo: Ja
voltaje-de-entrada-de-CA: 110–220 V
Temperatura de funcionamiento (TT): -20 - 70 °C
Tipo-de-visualización: LCD
Exposición: Ja
Función de control remoto: Ja
Ampliación máxima: 200 x
Tensión continua (CC): 5 V
Material de la lente: Glas
tipo de microscopio: Digitale microscoop
Ampliación mínima: 10 x
Instalación manual: Ja
Profundidad de la mesa: 180 mm
Rango de movimiento de escalera (vertical): 0 - 83 mm
Rango de movimiento de la mesa (horizontal): 0 - 43 mm
Cabeza-giratoria: Ja
Distancia de la lente al objeto (máx.): 90 mm
Rango espectral: 410 - 1100 nm

¿Necesitas ayuda?

Si necesitas ayuda con Anthem AVM 90 haz una pregunta a continuación y otros usuarios te responderán




sistema de alta fidelidad Anthem Manuales

sistema de alta fidelidad Manuales

Últimos sistema de alta fidelidad Manuales