Argoclima Splitto Jr Manual de Usario

Argoclima Calentador Splitto Jr

Lee a continuación 📖 el manual en español para Argoclima Splitto Jr (5 páginas) en la categoría Calentador. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
V 04/10 1
CERAMIC FAN HEATER
Read the instructions carefully before installing and operating the appliance or performing maintenance
operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/o r
damages. Store these instructions for future reference.
INSTALLATION AND OPERATION INSTRUCTIONS
EN
V 04/10 2
GENERAL SAFETY INFORMATION
Use this ceramic fan heater only as outlined in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock or injury to persons.
Ensure that the mains power complies with the voltage specified on the fan heater’s data plate
(220-240VAC/50Hz).
This product is not a toy. Children should be adequately supervised to ensure that they do not play with the
appliance.
This appliance is not suitable for use by persons (including children) with reduced physical, sensory or
mental abilities, or without the necessary experience and knowledge, unless they have been adequately
supervised and instructed concerning use of the appliance by a person responsible for their safety.
Do not cover the appliance or restrict the air inlet and outlet grilles to prevent overheating.
Ensure that all objects are at least 1 meter from the front and sides of the appliance.
Disconnect the mains power when the appliance is not used or for cleaning operations.
Avoid using the fan heater in dusty environments or in the presence of inflammable vapours (e.g. in
workshops or garages) or paint vapours.
Do not use the appliance to dry clothing.
Use the appliance in a well-ventilated area.
Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire
and may damage the appliance. To avoid the risk of fire, do not block the grilles or tamper with them in any
way while the ceramic fan heater operates.
Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be
replaced by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.
Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact
qualified technical personnel to examine the appliance or perform any electrical or mechanical repairs.
The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by
unplugging the appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.
Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not
wet) cloth rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.
To disconnect the ceramic fan heater, push the switch to OFF and remove the plug from the socket. Pull
on the plug only. Avoid pulling on the cord when disconnecting the ceramic fan heater.
Do not place any objects on the cord and do not bend it.
It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a
single extension cord to operate multiple appliances.
Do not immerse the cord, plug or any other element of the appliance in water or other liquids.
Do not touch the plug with wet hands.
Do not place the fan heater above or near another heat source.
WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING.
The symbol below signals the above warning:
The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with
inflammable material including curtains, drapery, blankets, etc. KEEP THE FAN HEATER AWAY FROM
THESE MATERIALS.
Do not connect the appliance to the mains power before it has been properly assembled and positioned.
The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot
surfaces.
Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place
the cord far away from busy areas or where it cannot be accidentally pulled-out.
Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.
Do not position the fan heater below a socket outlet.
Do not operate the appliance outdoors.
WARNING: do not use the fan heater with a controller or any other device that activates the
appliance automatically, as there may be a risk of fire if the fan heater is covered or incorrectly
positioned.
Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of the
initial heating up of the internal heating elements, and should not recur later on.
V 04/10 3
Do not attempt to repair, disassemble or modify the appliance. The appliance does not contain parts that
can be repaired by the user.
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE PERFORMING MAINTENANCE
OPERATIONS.
Do not place anything on the product; avoid placing wet garments on the fan heater.
Turn the appliance off if unattended in order to avoid accidents.
Ensure that the product does not operate in the presence of unsupervised children, animals or disabled
persons.
If the product is not used for prolonged periods, disconnect the plug, replace the product in its packaging
and store it in a dry, ventilated place.
Ensure that the air inlet /outlet are not close to walls or curtains when the product is in use, so as to avoid
obstructing the product and hampering its efficiency.
If the product emits unusual noises or strange smells during operation, interrupt use and unplug it
immediately.
Do not let the cord dangle over the edge of a sink, worktop or similar objects.
Handle the appliance, cord or plug with dry hands only.
Never immerse the appliance in water or other liquids.
Do not operate the appliance near explosive or inflammable material.
Always switch off the appliance and unplug it in the following cases:
- If it does not function properly during use.
- Prior to maintenance operations.
- Before removing the plug.
- After using the appliance.
STRUCTURE AND PARTS
1. Front panel
2. Control panel lid
3. Air discharge grille
4. Swinging flap
CONTROL PANEL ON THE APPLIANCE
From left, the symbols on the control panel correspond
to the following functions:
1. POWER/WIND: ON/OFF
2. HEATER: heating power selection
0= cold air
I = minimum heating power (1,000 W)
II= maximum heating power (2,000W),
3 - VANE: horizontal swinging flap
0= swinging off
I = swinging on

Especificaciones del producto

Marca: Argoclima
Categoría: Calentador
Modelo: Splitto Jr

¿Necesitas ayuda?

Si necesitas ayuda con Argoclima Splitto Jr haz una pregunta a continuación y otros usuarios te responderán




Calentador Argoclima Manuales

Calentador Manuales

Últimos Calentador Manuales