Arris SURFboard SVG2482AC Manual de Usario

Arris Router SURFboard SVG2482AC

Lee a continuación 📖 el manual en español para Arris SURFboard SVG2482AC (66 páginas) en la categoría Router. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/66
SURFboard SVG2482AC Wi-Fi and Voice Modem
for XFINITY Customers
User Guide, STANDARD Revision x.5
P/N 365-095-31279
CommScope copyrights and trademarks
2021 CommScope, Inc. All rights reserved.
No part of this content may be reproduced in any form or by any means or used to make
any derivative work (such as translation, transformation, or adaptation) without written
permission from CommScope, Inc. and/or its affiliates (“CommScope”). CommScope
reserves the right to revise or change this content from time to time without obligation on
the part of CommScope to provide notification of such revision or change. ARRIS and the
ARRIS Logo are trademarks of CommScope, Inc. and/or its affiliates. All other trademarks are
the property of their respective owners.
Wi-Fi Alliance , Wi-Fi , the Wi-Fi logo, the Wi-Fi CERTIFIED logo, Wi-Fi protected access
(WPA), the Wi-Fi Protected Setup logo, and WMM are registered trademarks of Wi-Fi
Alliance. Wi-Fi Protected Setup , Wi-Fi Multimedia , and WPA2 are trademarks of Wi-Fi
Alliance.
CommScope provides this guide without warranty of any kind, implied or expressed,
including, but not limited to, the implied warranties of merchantability and fitness for a
particular purpose. ARRIS may make improvements or changes in the product(s) described
in this manual at any time.
The capabilities, system requirements and/or compatibility with third-party products
described herein are subject to change without notice.
SURFboard® SVG2482AC Wi-Fi® and Voice Modem for XFINITY® Customers User Guide STANDARD Revision x.5 2
Safety and regulatory information
Read all safety and regulatory information before installing your device and setting up your
home network connection.
Important safety instructions
Read this before you begin — When using your equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury to persons, including
the following:
Read all the instructions listed here and/or in the user manual before you operate
this device. Give attention to all safety precautions. Retain the instructions for future
reference.
This device must be installed and used in strict accordance with manufacturer’s
instructions, as described in the user documentation that is included with the device.
Comply with all warning and caution statements in the instructions. Observe all warning
and caution symbols that are affixed to this device.
To prevent fire or shock hazard, do not expose this device to rain or moisture. The
device must not be exposed to dripping or splashing. Do not place objects filled with
liquids, such as vases, on the device.
This device was qualified under test conditions that included the use of the supplied
cables between system components. To ensure regulatory and safety compliance, use
only the provided power and interface cables and install them properly.
Different types of cord sets may be used for connections to the main POWER supply
circuit. Use only a main line cord that complies with all applicable device safety
requirements of the country of use.
Installation of this device must be in accordance with national wiring codes and conform
to local regulations.
Operate this device only from the type of power source indicated on the device’s
marking label. If you are not sure of the type of power supplied to your home, consult
your dealer or local power company.
Do not overload outlets or extension cords, as this can result in a risk of fire or electric
shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked
wire insulation, and broken plugs are dangerous. They may result in a shock or fire
hazard.
Route power supply cords so that they are not likely to be walked on or pinched by
items placed upon or against them. Pay attention to cords where they are attached to
plugs and convenience receptacles; and examine the point where they exit from the
device.
Place this device in a location that is close enough to an electrical outlet to
accommodate the length of the power cord.
SURFboard® SVG2482AC Wi-Fi® and Voice Modem for XFINITY® Customers User Guide STANDARD Revision x.5 3

Especificaciones del producto

Marca: Arris
Categoría: Router
Modelo: SURFboard SVG2482AC
Colocación del dispositivo: Vrijstaand
Tipo de operación: Knoppen
Color del producto: Wit
Bisagras de puerta: Rechts
Pantalla incorporada: Ja
Peso.: 39000 g
Ancho: 601 mm
Profundidad: 618 mm
Altura: 820 mm
Impuesto neto: - W
Nivel de ruido: 47 dB
Consumo-anual-de-energía: - kWu
Peso del embalaje: 41000 g
Material de la carcasa: Staal
Dirección de apertura de puerta intercambiable.: Ja
Adecuado para ajuste de panel: Nee
Capacidad neta del frigorífico: 109 l
Frigorífico de capacidad bruta: 142 l
Iluminación interior del frigorífico: Ja
tipo-de-lámpara: LED
Número de estantes en el refrigerador.: 3
Material del estante: Kunststof
Al área del compartimento: Nee
Alarma de puerta abierta: Ja
Uso de energía por día: 0.747 kWh/24u
Actual: 1 A
Medio de refrigeración: R600a
Pies ajustables: Ja
Sistema de refrigeración: Geventileerd
Sistema multivía aérea: Nee
Profundidad cuando la puerta está abierta.: 1196 mm
voltaje-de-entrada-de-CA: 220 - 240 V
Frecuencia-de-entrada-de-CA: 50 Hz

¿Necesitas ayuda?

Si necesitas ayuda con Arris SURFboard SVG2482AC haz una pregunta a continuación y otros usuarios te responderán




Router Arris Manuales

Router Manuales

Últimos Router Manuales