Aruba Instant 100 Manual de Usario

Aruba punto de acceso Instant 100

Lee a continuación 📖 el manual en español para Aruba Instant 100 (2 páginas) en la categoría punto de acceso. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

IAP-105 Wireless Access Point

Installation Guide

About the Aruba IAP-105 Access Point

The Aruba IAP-105 wireless access point supports the IEEE 802.11n standard for

high-performance WLAN. This access point uses MIMO (Multiple-in, Multiple-

out) technology and other high-throughput mode techniques to deliver high-

performance, 802.11n 2.4 GHz and 5 GHz functionality while simultaneously

supporting existing 802.11a/b/g wireless services.

The Aruba IAP-105 access point provides the following capabilities:

Wireless transceiver

Protocol-independent networking functionality

IEEE 802.11a/b/g/n operation as a wireless access point

IEEE 802.11a/b/g/n operation as a wireless air monitor

Compatibility with IEEE 802.3af PoE

Package Contents

IAP-105 access point

Installation guide (this document)

Aruba Instant Quick Start Guide

Figure 1 IAP-105

IAP-105 Hardware Overview

Figure 2 IAP-105 Front

LEDs

The IAP-105 is equipped with four LEDs that indicate the status of the various

components of the IAP.

PWR: Indicates whether or not the IAP-105 is powered-on

ENET: Indicates the status of the IAP-105’s Ethernet port

11A/N: Indicates the status of the 802.11a/n radio

11B/G/N: Indicates the status of the 802.11b/g/n radio

For information about the IAP-105’s LED behavior, see Table 1 on page 2.

Figure 3 IAP-105 Rear

Console Port

Use the console port to connect to a terminal for direct local management.

Ethernet Port

IAP-105 is equipped with a single 10/100/1000Base-T (RJ-45) auto-sensing, MDI/

MDX wired-network connectivity port. This port supports IEEE 802.3af Power

over Ethernet (PoE) compliance, accepting 48VDC as a standard defined

Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE

midspan injector, or network infrastructure that supports PoE.

DC Power Socket

If PoE is not available, an optional Aruba IAP AC-DC adapter kit (sold

separately) can be used to power the IAP-105.

Reset Button

The reset button can be used to return the IAP to factory default settings. If you

have converted your IAP to a campus AP, pressing the reset button converts it

back to an IAP. To reset the IAP:

1. Power off the IAP.

2. Press and hold the reset button using a small, narrow object, such as a

paperclip.

3. Power-on the IAP without releasing the reset button. The power LED will

flash within 5 seconds.

4. Release the reset button.

The power LED will flash again within 15 seconds indicating that the reset is

completed. The IAP will now continue to boot with the factory default settings.

Before You Begin

IAP Pre-Installation Checklist

Before installing your IAP-105 access point, be sure that you have the following:

CAT5 UTP cable of required length

One of the following power sources:

IEEE 802.3af-compliant Power over Ethernet (PoE) source

The POE source can be any power source equipment (PSE)

Aruba IAP AC-DC adapter kit (sold separately)

Summary of the Setup Process

Successful setup of an IAP-105 access point consists of five tasks, which must be

performed in this order:

1. Identify the specific installation location for each IAP.

2. Install each IAP.

3. Verify post-installation connectivity.

4. Configure each IAP.

Identifying Specific Installation Locations

You can mount the IAP-105 access point on a wall or on the ceiling. Each

location should be as close as possible to the center of the intended coverage

area and should be free from obstructions or obvious sources of interference.

These RF absorbers/reflectors/interference sources will impact RF propagation

and should have been accounted for during the planning phase and adjusted for

in VisualRF.

Identifying Known RF Absorbers/Reflectors/Interference

Sources

Identifying known RF absorbers, reflectors, and interference sources while in

the field during the installation phase is critical. Make sure that these sources are

taken into consideration when you attach an IAP to its fixed location.

RF absorbers include:

Cement/concrete—Old concrete has high levels of water dissipation, which

dries out the concrete, allowing for potential RF propagation. New concrete

has high levels of water concentration within the concrete, blocking RF

signals.

Natural Items—Fish tanks, water fountains, ponds, and trees

Brick

RF reflectors include:

Metal Objects—Metal pans between floors, rebar, fire doors, air conditioning/

heating ducts, mesh windows, blinds, chain link fences (depending on

aperture size), refrigerators, racks, shelves, and filing cabinets

Do not place an IAP between two air conditioning/heating ducts. Make sure

that APs are placed below ducts to avoid RF disturbances.

RF interference sources include:

Microwave ovens and other 2.4 or 5 GHz objects (such as cordless phones)

Cordless headset such as those used in call centers or lunch rooms

Installing the IAP

Using the Integrated Wall-Mounting Slots

The keyhole-shaped slots on the back of the IAP can be used to attach the device

upright to an indoor wall or shelf. When you choose the mounting location, allow

additional space at the right of the unit for cables.

1. Since the ports are on the back of the device, make sure that you mount the

IAP in such a way that there is a clear path to the Ethernet port, such as a pre-

drilled hole in the mounting surface.

2. At the mounting location, install two screws on the wall or shelf, 1 7/8 inches

(4.7 cm) apart. If you are attaching the device to drywall, Aruba recommends

using appropriate wall anchors (not included).

3. Align the mounting slots on the rear of the IAP over the screws and slide the

unit into place (see Figure 4).

Figure 4 Installing the IAP-105 Access Point on a Wall

Using the Integrated Ceiling Tile Rail Slots

The snap-in tile rail slots on the rear of the IAP can be used to securely attach the

device directly to a 15/16" wide, standard ceiling tile rail.

1. Pull the necessary cables through a prepared hole in the ceiling tile near

where the IAP will be placed.

2. If necessary, connect the console cable to the console port on the back of the

IAP.

Hold the IAP next to the ceiling tile rail with the ceiling tile rail mounting slots at

approximately a 30-degree angle to the ceiling tile rail (see Figure 5). Make sure

that any cable slack is above the ceiling tile.

Figure 5 Orienting the Ceiling Tile Rail Mounting Slots

3. Pushing toward the ceiling tile, rotate the IAP clockwise until the device

clicks into place on the ceiling tile rail.

Connecting Required Cables

Install cables in accordance with all applicable local and national regulations

and practices.

Ethernet Ports

The RJ45 Ethernet port (ENET) supports 10/100/1000Base-T auto-sensing MDI/

MDX connections. Use these ports to connect the IAP to a twisted pair Ethernet

LAN segment. Use a 4- or 8-conductor, Category 5 UTP cable up to 100 m (325

feet) long.

Inform your supplier if there are any incorrect, missing, or damaged parts. If

possible, retain the carton, including the original packing materials. Use

these materials to repack and return the unit to the supplier if needed.

AP105_005

AP105_001

105

PWR

ENET

11B/G/N

11A/N

FCC Statement: Improper termination of access points installed in the

United States (non-US Regulatory Domain model/s) will be in violation of

the FCC grant of equipment authorization. Any such willful or intentional

violation may result in a requirement by the FCC for immediate termination

of operation and may be subject to forfeiture (47 CFR 1.80).

EU Statement:

Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands.

Please refer to the Aruba Instant User Guide for details on restrictions.

Produit réseau local radio basse puissance operant dans la bande

fréquence 2.4 GHz et 5 GHz. Merci de vous referrer au Aruba Instant User

Guide pour les details des restrictions.

Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet.

Weitere Informationen bezlüglich Einschränkungen finden Sie im Aruba

Instant User Guide.

Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare

riferimento alla Aruba Instant User Guide per avere informazioni detagliate

sulle restrizioni.

AP105_002

CONSOLE

ENET

12V 1.25A

CONSOLE

ENET

Power

Connector

Reset Button

Aruba Networks, Inc., in compliance with governmental requirements, has

designed the IAP-105 access points so that only authorized network

administrators can change the settings. For more information about IAP

configuration, refer to the Aruba Instant Quick Start Guide and Aruba

Instant User Guide.

Access points are radio transmission devices and as such are subject to

governmental regulation. Network administrators responsible for the

configuration and operation of access points must comply with local

broadcast regulations. Specifically, access points must use channel

assignments appropriate to the location in which the access point will be

used.

RF Radiation Exposure Statement: This equipment complies with FCC

RF radiation exposure limits. This equipment should be installed and

operated with a minimum distance of 13.78 inches (35 cm) between the

radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter

must not be co-located or operating in conjunction with any other antenna

or transmitter. When operated in the 5.15 to 5.25 GHz frequency range, this

device is restricted to indoor use to reduce the potential for harmful

interference with co-channel Mobile Satellite Systems.

Service to all Aruba Networks products should be performed by trained

service personnel only.

Make sure the IAP fits securely on the ceiling tile rail when hanging the

device from the ceiling; poor installation could cause it to fall onto people

or equipment.

AP105_003

AP105_004

IAP-105 Wireless Access

Point

Installation Guide

www.arubanetworks.com

1344 Crossman Avenue

Sunnyvale, California 94089

Phone: 408.227.4500

Fax 408.227.4550

IAP-105 Wireless Access Point | Installation Guide

Part Number 0510860-03 | May 2011

Contacting Aruba Networks

Table 1

Contact Center Online

Main Site http://www.arubanetworks.com

Support Site https://support.arubanetworks.com

Wireless Security Incident

Response Team (WSIRT)

http://www.arubanetworks.com/support/wsirt.php

EMEA Support Email emea.support@arubanetworks.com

WSIRT Email

Please email details of any security

problem found in an Aruba product.

wsirt@arubanetworks.com

Table 2

Service & Support Contact Center Telephone

Aruba Corporate +1 (408) 227-4500

FAX +1 (408) 227-4550

Support

United States

Universal Free Phone Service Number (UIFN): Australia, Canada,

China, France, Germany, Hong Kong, Ireland, Israel, Japan, Korea,

Singapore, South Africa, Taiwan, and the UK

All Other Countries

800-WI-FI-LAN (800-943-4526)

+800-4WIFI-LAN (+800-49434-526)

+1 (408) 754-1200

For Wireless That Works®, Mobile Edge Architecture, People Move. Networks Must Follow., RFProtect

®, The All

Wireless Workplace Is Now Open For Business, and The Mobile Edge Company

® are trademarks of Aruba

Open Source Code

Certain Aruba products include Open Source software code developed by third parties, including software code

subject to the GNU General Public License ("GPL"), GNU Lesser General Public License ("LGPL"), or other Open

Source Licenses. The Open Source code used can be found at this site:

http://www.arubanetworks.com/open_source

Legal Notice

The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate

other vendors' VPN client devices constitutes complete acceptance of liability by that individual or corporation for

this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against

it with respect to infringement of copyright on behalf of those vendors.

Warranty

This hardware product is protected by the Aruba Limited Lifetime warranty.

Altering this device (such as painting it) voids the warranty.

The 10/100/1000 Mbps Ethernet port is on the back of the IAP. The port has an RJ-

45 female connector with the pin-outs shown in Figure 6.

Figure 6 Gigabit Ethernet Port Pin-Out

Serial Console Port

The serial console port (Console) allows you to connect the IAP to a serial

terminal or a laptop for direct local management. This port is an RJ-45 female

connector with the pinouts described in Figure 7. Connect this port in one of the

following ways:

Connect it directly to a terminal or terminal server using an Ethernet cable.

Use a modular adapter to convert the RJ-45 (female) connector on the IAP to

a DB-9 (male) connector, and connect the adapter to a laptop using an RS-232

cable. See Figure 8 for connector details of the adapter.

Figure 7 Serial Port Pin-Out

Figure 8 RJ-45 (Female) to DB-9 (Male) Modular Adapter Conversion

Power Connection

The IAP-105 has a single 12V DC power jack socket to support powering through

an AC-to-DC power adapter.

Verifying Post-Installation Connectivity

The integrated LEDs on the IAP can be used to verify that the IAP is receiving

power and initializing successfully (see Table 1). Refer to the Aruba Instant

Quick Start Guide for further details on verifying post-installation network

connectivity.

Product Specifications

Electrical

Ethernet:

1 x 10/100/1000Base-T auto-sensing Ethernet RJ-45 Interfaces

MDI/MDX

IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab

(1000Base-T)

Power over Ethernet (IEEE 802.3af compliant), 48V DC/350mA (see Figure

6 for pin configuration)

Power: 12 VDC power interface, supports powering through an AC-to-DC

power adapter

For additional specifications on this product, please refer to the data sheet. The

data sheet can be found at www.arubanetworks.com.

Proper Disposal of Aruba Equipment

For the most current information about Global Environmental Compliance and

Aruba products, see our website at www.arubanetworks.com.

Waste of Electrical and Electronic Equipment

Aruba products at end of life are subject to separate collection

and treatment in the EU Member States, Norway, and

Switzerland and therefore are marked with the symbol shown

at the left (crossed-out wheelie bin). The treatment applied at

end of life of these products in these countries shall comply

with the applicable national laws of countries implementing

Directive 2002/96EC on Waste of Electrical and Electronic

Equipment (WEEE).

European Union RoHS

Aruba products also comply with the EU Restriction of

Hazardous Substances Directive 2002/95/EC (RoHS). EU

RoHS restricts the use of specific hazardous materials in

the manufacture of electrical and electronic equipment.

Specifically, restricted materials under the RoHS Directive are Lead (including

Solder used in printed circuit assemblies), Cadmium, Mercury, Hexavalent

Chromium, and Bromine. Some Aruba products are subject to the exemptions

listed in RoHS Directive Annex 7 (Lead in solder used in printed circuit

assemblies). Products and packaging will be marked with the “RoHS” label

shown at the left indicating conformance to this Directive.

China RoHS

Aruba products also comply with China environmental declaration

requirements and are labeled with the “EFUP 10” label shown at

the left.

Safety and Regulatory Compliance

Aruba Networks provides a multi-language document that contains country-

specific restrictions and additional safety and regulatory information for all

Aruba access points. This document can be viewed or downloaded from the

following location: www.arubanetworks.com/safety_addendum.

The device will be electronically labeled and the FCC ID will be displayed via the

controller Web UI under the About menu.

EMC Compliance and Warning Statement

IEC 60601-1-2: 2007

EN 60601-1-2: 2007

This equipment has been tested and found to comply with the limits of the

standard for medical devices, IEC 60601-1-2:2007. The unit also complies with the

requirements of EN 60601-1-2:2007, providing the presumption of compliance to

the European Union’s Medical Device Directive 2007/47/EC. The limits are

designed to provide reasonable protection against harmful interference in a

typical medical installation. This equipment generates, uses and can radiate radio

frequency energy, and, if not installed and used in accordance with the

manufacturer’s instructions may cause harmful interference to other devices in

the vicinity. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment causes interference with other devices,

which may be determined by turning the equipment off and on, the user is

encouraged to try and correct the interference by one or more of the following

measures:

Reorient or relocate the device receiving the interference.

Increase the separation between the equipment.

Connect the equipment into an outlet on a circuit different from that to which

the other device(s) are connected.

Consult the manufacturer or field service technician for help.

The Model IAP-105 does not have an Applied Part as defined in IEC 60601-1. The

protection against electric shock is Class ll.

Device is not protected against ingress of liquids and has a protection class of

IPX0 as defined by IEC 60601-1 and IEC 60529. Equipment not suitable for use in

the presence of flammable mixtures.

The unit is considered “Continuous Operation” equipment as defined by IEC

60601-1.

Power Consumption – 48 VDC 802.3af power over Ethernet or 12VDC, 1.25A for

external AC supplied power (adapter sold separately); Maximum power

consumption – 12.5W.

Mechanical Dimensions: 132mm x 135mm x 45mm; 300g.

Environmental: Operating Temp: 0° C to +50° C (+32° F to +122° F); Humidity: 5

to 95% non-condensing. Storage Temp: -40° CS to +70° C (-40°F to +158°F).

If both POE and DC power are available, the IAP uses POE even when

there is not enough POE voltage available to power the IAP.

Table 1 IAP-105 Series LED Meanings

LED Color/State Meaning

PWR Off No power to IAP

Green flashing System initializing

Red steady System failed to

initialize, contact TAC

Green steady Power on, device ready

ENET

(10/100/1000 Mbps)

Off No link

Green on 1000 Mbps link

Amber on 10/100 Mbps link

Green flashing Ethernet link activity

11A/N Off 5 GHz radio is disabled

Amber 5 GHz radio enabled in

WLAN mode

Green 5 GHz radio enabled in

11n mode

Green flashing 5 GHz Air Monitor or RF

Protect mode

1000Base-T Gigabit

Ethernet Port

RJ-45 Female

Pin-Out

Signal Name

BI_DC+

BI_DC-

BI_DD+

BI_DD-

BI_DA+

BI_DA-

BI_DB+

BI_DB-

Function

Bi-directional pair +C

Bi-directional pair -C

Bi-directional pair +D

Bi-directional pair -D

Bi-directional pair +A

Bi-directional pair -A

Bi-directional pair +B

Bi-directional pair -B

Serial

Console Port

TxD

GND

RxD

RJ-45 Female

Pin-Out

Direction

Input

Output

GND

6 3

RJ-45 DB-9

Internal

Connections

TxD

GND

RxD

TxD

GND

RxD

RJ-45 Female

Pin-Out

Direction

Input

Output

DB-9 Male

Pin-Out

TxD

RxD

Ground

Direction

Input

Output

11B/G/N Off 2.4 GHz radio disabled

Amber 2.4 GHz radio enabled in

WLAN mode

Green 2.4 GHz radio enabled in

11n mode

Green flashing 2.4 GHz Air Monitor or

RF Protect mode

If a power adapter other than the one provided by Aruba Networks is used

in the US or Canada, it should be cULus (NRTL) Listed, with an output

rated 12 VDC, minimum 1.25A, marked “LPS” or “Class 2,” and suitable for

plugging into a standard power receptacle in the US and Canada.

Table 1 IAP-105 Series LED Meanings

LED Color/State Meaning

RF Radiation Exposure Statement: This equipment complies with FCC

RF radiation exposure limits. This equipment should be installed and

operated with a minimum distance of 13.78 inches (35 cm) between the

radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter

must not be co-located or operating in conjunction with any other antenna

or transmitter. When operated in the 5.15 to 5.25 GHz frequency range, this

device is restricted to indoor use to reduce the potential for harmful

interference with co-channel Mobile Satellite Systems.

Especificaciones del producto

Marca:	Aruba
Categoría:	punto de acceso
Modelo:	Instant 100
Color del producto:	Zwart
Número de funciones:	3
Fácil de limpiar:	Ja
Activos:	1200 W
factor vorm:	Ovaal
Termostato ajustable:	Ja
Recubrimiento antiadherente:	Ja
Número de personas:	8 persoon/personen
Mango(s) frío(s):	Ja
Material laminar:	Steen
Placas removibles:	Ja