Atlas Sound FAP40T Manual de Usario

Atlas Sound Vocero FAP40T

Lee a continuación 📖 el manual en español para Atlas Sound FAP40T (4 páginas) en la categoría Vocero. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
AtlasSound.com 1/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. ATS001618 RevD 8/11
Strategy Series® II In-Ceiling 4" Speaker System
FAP40T(B)
Specifications
Power Rating 16 Watts (8Ω)
Transformer Taps 1, 2, 4, 8, & 16 Watts & 8 BypassΩ
Frequency Response 100Hz – 12kHz (±3dB)
80Hz – 15kHz (±5dB)
Sensitivity (1W / 1M) 87dB
Woofer 4" Polypropylene with SBR Surround
Woofer Magnet Weight 13 oz (369g)
Bezel Diameter 73⁄8" (187mm)
Overall Height 71⁄8" (181mm)
Cut-Out Diameter 65⁄16" (160mm)
Features
• Tuned & Ported Design for Extended Bass Response
• 16 Watts Internal Transformer
• 8Ω Transformer Bypass Setting
• Low Profile Plastic Enclosure
• Input Via 2 Pole Terminal Strip
• Press-Fit Grille Blends Perfectly into Contemporary Architecture
• Lightweight Construction Makes Use of Additional Support in Drywall
Ceilings Unnecessary
• Tile Bridge Included
• Perfect Companion with the FAPSUB Subwoofer System When Sub
Bass Is Required
• Also Available in Black FAP40T-B
• UL 1480 Listed
Applications
Designed to provide high performance in a very compact footprint, the
FAP40T appeals to both system designers and architects. FAP40T is ideal
for high-intelligibility voice, music, and signal reproduction in commercial,
industrial, and institutional applications.
General Description
A unique, patented tap selector switch design allows for easy system
tuning. A full selection of taps up to 16 Watts as well as an 8 transΩ-
former bypass setting is included for maximum system versatility. This
switch "knob" also functions as a diffuser cone, providing smooth, even
dispersion of the high frequency content from the center of the 4" poly-
propylene driver. In fact, the high frequency response of the FAP40T is
so natural that many would assume that the driver in the FAP40T was a
coaxial design instead of a single cone driver.
Low frequency response is enhanced by the tuned and ported enclosure
design. The enclosure (UL1480 Listed) is constructed of high impact
injection molded plastic and includes a press fit grille design that blends
well with contemporary architecture.
A two pole terminal strip housed below a removable metal cover on the
back of the FAP40T enclosure allows for easy system wiring as well as
"daisy chain" wiring to other FAP40Ts or even FAPSUB subwoofers (a
great combination).
FAP40T
FAP40T-B
AtlasSound.com 2/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. ATS001618 RevD 8/11
Mounting Accessories
A Tile Bridge is included in the package for suspended ceiling applica-
tions. The light weight design of the FAP40T coupled with the "Dog Leg"
mounting system allows the FAP40T to mount into most drywall ceilings
without the need for a separate mounting ring.
For new construction drywall ceiling applications, the optional FA-TR4
trim ring is available. This unit provides a marked location for drywall
installers to cut around, essentially reserving the desired location in the
ceiling until final installation of FAP40T. Mounting holes are provided to
accommodate 16" or 24" OC stud / joist mounting.
The package includes an attractive press-fit grille, which nicely matches
contemporary architecture.
The FAP40T includes a secondary support point built into the termination
cover. This "ring" may be used with an auxiliary support cable in drop tile
installations.
Architect & Engineer Specifications
The loudspeaker system shall be Atlas Sound FAP40T. System shall
include a high performance 4" loudspeaker, ported bass reflex enclosure
and press-fit grille for conventional ceiling installation.
Frequency response for the system shall be 100Hz – 12kHz (±3dB),
80Hz – 15kHz (±5dB). Sensitivity shall be 87dB average.
Loudspeaker shall be compromised of a 4" cone type driver. Cone shall
be constructed of polypropylene with a butyl rubber surround. Magnet
shall be a minimum of 13oz (368.5g) and the voice coil diameter shall be
1" (25mm).
Transformer shall be a 70.7V / 100V type with 1, 2, 4, 8, and 16 watt
primary taps (@70.7V) with a front mounted tap selector switch. This
tap selector switch shall also include a transformer bypass setting for
instances where the 8 FAP40T driver is to be direct coupled with Ω
a low impedance amplifier.
Enclosure shall be an injection molded plastic design. Internal volume
shall be 85 in3 (1.4L).
To facilitate connection in conduit systems, enclosure shall be equipped
with an access panel covering a recessed terminal cup. This cover shall
provide a 7⁄8" (22mm inside diameter) hole for top access.
External wiring shall be accomplished via a two pole terminal strip with
screw-down terminals to provide secure wire termination.
The system shall include a tile bridge assembly to reinforce the ceil-
ing material. The tile bridge shall be designed for use on either 2' x 4'
(609mm x 1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles.
Overall front face diameter shall not exceed 7
3⁄8" (187mm); overall height
shall not exceed 7
1⁄8" (181mm).
Grilles shall be press-fit, manufactured from 24-gauge perforated steel
mesh and finished in white epoxy. Round grille shall be 5
1⁄2" (140mm)
diameter.
The loudspeaker shall be the Atlas Sound FAP40T.
FAP40T
(Shown Installed in Drop Tile Ceiling)
FAP40T
(Dog Ears Open on Included Tile Bridge)
AtlasSound.com 3/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. ATS001618 RevD 8/11

Especificaciones del producto

Marca: Atlas Sound
Categoría: Vocero
Modelo: FAP40T

¿Necesitas ayuda?

Si necesitas ayuda con Atlas Sound FAP40T haz una pregunta a continuación y otros usuarios te responderán


Vocero Atlas Sound Manuales

Atlas Sound

Atlas Sound I8SM+ Manual de Usario

2 Septiembre 2024
Atlas Sound

Atlas Sound PM8GD-B Manual de Usario

2 Septiembre 2024
Atlas Sound

Atlas Sound SMA-15 Manual de Usario

2 Septiembre 2024
Atlas Sound

Atlas Sound FAP40T Manual de Usario

1 Septiembre 2024
Atlas Sound

Atlas Sound FAP62T-UL2043 Manual de Usario

1 Septiembre 2024
Atlas Sound

Atlas Sound APT-34AT Manual de Usario

1 Septiembre 2024
Atlas Sound

Atlas Sound Strategy SM82T-B Manual de Usario

1 Septiembre 2024
Atlas Sound

Atlas Sound FAP42TC-UL2043 Manual de Usario

31 Agosto 2024
Atlas Sound

Atlas Sound SMP-12 Manual de Usario

30 Agosto 2024
Atlas Sound

Atlas Sound SHS-6T2 Manual de Usario

30 Agosto 2024

Vocero Manuales

Últimos Vocero Manuales

Continental Edison

Continental Edison CELED53HP20V2B4 Manual de Usario

27 Octubre 2024
Canton

Canton Vento 830.2 Manual de Usario

27 Octubre 2024
Jamo

Jamo S7-25C Manual de Usario

27 Octubre 2024
Bowers Wilkins

Bowers Wilkins 707 S2 Manual de Usario

27 Octubre 2024
Monacor

Monacor GLS-301/GR Manual de Usario

27 Octubre 2024
Monitor Audio

Monitor Audio Silver C150 Manual de Usario

26 Octubre 2024
FBT

FBT MITUS 210M Manual de Usario

26 Octubre 2024
CyberData Systems

CyberData Systems SIP 011398 Manual de Usario

26 Octubre 2024
Lamax

Lamax PartyGo1 Play Manual de Usario

26 Octubre 2024
IKEA

IKEA SYMFONISK 405.847.50 Manual de Usario

26 Octubre 2024