Atlas Sound TSD-ALC2 Manual de Usario

Atlas Sound sistema de alta fidelidad TSD-ALC2

Lee a continuación 📖 el manual en español para Atlas Sound TSD-ALC2 (4 páginas) en la categoría sistema de alta fidelidad. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

NAMES OF PARTS

FRONT

15. Format switch

16. Viewnder*

17. Ready lamp

18. Zoom lever

19. Strap eyelet

20. Film-chamber door

21. Film-chamber release

22. Tripod socket

23. Battery-chamber door

*Do not touch

BACK

DATA PANEL

1. Title/Date/Time/ISO display

2. Title marks

3. Battery-condition indicator

4. Frame counter

5. Self-timer indicator

6. Cassette mark

7. Flash-mode indicators

1. Focus frame

2. Close-framing guide

3. Ready lamp

VIEWFINDER

Attach the strap as shown.

Minolta Co., Ltd. 3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan

Minolta GmbH Kurt-Fischer-Strasse 50, D-22923 Ahrensburg, Germany

Minolta France S.A. 365 Route de Saint-Germain, F-78420 Carrieres-Sur-Seine, France

Minolta (UK) Limited Rooksley Park, Precedent Drive, Rooksley, Milton Keynes, MK13 8HF, England

Minolta Austria Ges. m.b.H. Amalienstrasse 59-61, A-1131 Wien, Austria

Minolta Camera Benelux B.V. Zonnebaan 39, P.O. Box 6000, NL-3600 HA Maarssen, The Netherlands

Belgium Branch Kontichsesteenweg 38, B-2630 Aartselaar, Belgium

Minolta (Schweiz) AG Riedstrasse 6, CH-8953 Dietikon, Switzerland

Minolta Svenska AB P.O.Box 9058, Albygatan 114, S-17109 Solna, Sweden

Finland Branch Niittykatu 6 PL 37, SF-02201 Espoo, Finland

Minolta Portugal Limitada Av. do Brasil 33-A, P-1700 Lisboa, Portugal

Minolta Corporation

Head Office 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.

Los Angeles Branch 11150 Hope Street Cypress, CA 90630, U.S.A.

Minolta Canada Inc.

Head Office 369 Britannia Road East, Mississauga, Ontario L4Z 2H5, Canada

Vancouver Branch 230-3771 Jacombs Road, Richmond, B.C. V6V 2L9, Canada

Minolta Hong Kong Limited Room 208, 2/F, Eastern Center, 1065 King’s Road, Quarry Bay, Hong Kong, China

Minolta Singapore (Pte) Ltd. 10, Teban Gardens Crescent, Singapore 608923

Shanghai Minolta Optical

Products Co., Ltd. 368 Minolta Road, Songjiang, Shanghai, China

Universal Copyright Convention

9222-2211-31 W-B801 Printed in China

*Do not touch

EInstruction Manual

ATTACHING THE STRAP

FOR PROPER AND SAFE USE

Read and understand all warnings and cautions before using this product.

WARNING

Batteries may become hot or explode due to improper use.

• Use only the batteries specied in this instruction manual.

• Do not install the batteries with the polarity (+/–) reversed.

• Do not subject batteries to re or high temperatures.

• Do not attempt to recharge, short, or disassemble.

• Tape over lithium battery contacts before disposal. Follow local codes

for battery disposal.

Use caution, accidents may occur when using this product near young

children.

Keep batteries or things that could be swallowed away from young

children. Contact a doctor immediately if an object is swallowed.

Immediately remove the batteries and discontinue use if...

• the camera is dropped or subjected to an impact in which the interior is

exposed.

• the product emits a strange smell, heat, or smoke.

The lens retracts when the camera is turned o or Auto Power O is

activated. Touching the lens barrel while it is retracting may cause injury.

Do not disassemble. Electric shock may occur if a high voltage circuit

inside the camera is touched. Take your camera to a Minolta Service

Facility when repairs are required.

OPERATING TEMPERATURE AND CONDITIONS

• This camera is designed for use for -10 to 40°C (14 to 104°F).

• Never leave your camera where it may be subjected to extreme

temperatures such as the glove compartment of a car.

• At colder temperatures, the data panel response time will be slow; at

higher temperatures, the display will temporarily darken, but will

restore when the temperature normalizes.

• Never subject your camera to extreme humidity.

• To prevent condensation from forming, place the camera in a sealed

plastic bag when bringing it from the cold exterior to a warm building.

Allow it to come to room temperature before removing it from the bag.

• When photographing in cold weather, we recommend that you keep

the camera and spare batteries inside your coat to keep them warm

when you are not shooting. Cold batteries will regain some of their

charge when they warm up.

• This camera is not waterproof, dust-proof, or sand-proof; take care

when using it at the beach or near water. Costly or irreparable damage

may occur.

Thank you for your purchase of a Minolta product. Your new camera is

an easy to operate lens shutter camera from Minolta's line of Advanced

Photo System™ cameras. Your new light-weight, compact camera

features title imprinting, lm-chamber lock, and a 25-50mm zoom lens.

This manual has been designed to help you understand the operation

of your camera and its functions. Please familiarize yourself with the

names of the controls and their locations on the camera, then read this

manual thoroughly.

New processing…

In addition to returning your prints in the format

you selected, certied photonishers will return

your Advanced Photo System lm in its original

cassette with an index print. To order reprints,

simply choose the images you want from the

index print. No more searching through negatives

to nd the right frame.

Advanced Photo System™ is a trademark of the

ve system developing companies.

Easier to load…

Advanced Photo System cameras use the new

IX240 type lm. This new lm features drop-in-

loading to make loading your camera simple, the

rst time, every time. Indicators on the cassette

tell you and your camera if the lm is unexposed,

partially exposed, exposed, or processed.

Advantages of the Advanced Photo System

New print formats…

Classic C print, wider H print, and panorama P print formats are available with

Advanced Photo System cameras.

1. Shutter-release button

2. Title button

3. Date button

4. Data panel

5. Self-timer/Select button

6. Flash-mode/Adjust button

7. Manual-rewind button

8. Flash*

9. Viewnder window*

10. Lens*

11. Meter window*

12. AF windows*

13. Front cover

14. Self-timer/Red-eye reduction lamp

Ready lamp with the shutter-release button pressed half-way down.

Glows: Camera is ready

Blinks quickly: Subject is too close

Blinks slowly: Camera-shake warning

O: Flash is charging

Step

1 2 3

15 16 17 18*

1234567

7 6 5 4

1 2 3

11*

10*

12*

23 22 21 20

Step

FULL AUTO OPERATION-CONTINUED

Step

2. Insert the battery according to the + and –

marks inside the battery chamber and

snap the cover closed.

• After installing a new battery, reset the date and time.

Each time the camera is turned on, a symbol will appear briey in the data

panel to indicate the power status of the battery.

Power is sucient for all camera operations.

Power is sucient, but the battery will have to be

replaced soon.

Replace the battery. The shutter will lock until the battery

is replaced.

Your camera uses IX240 type film designed for use in Advanced Photo System

cameras.

• Your camera’s automatic transport system loads the lm, sets the lm speed, and

advances the lm after each exposure.

• After loading, the lm chamber cannot be opened until rewind has been initiated.

• DEP, Double Exposure Prevention, prevents the camera from accepting exposed lm.

• This camera will only load lm with the mark current.●

Visual Exposure Indicators

• The current VEI has a white indicator

behind it.

Hold the camera steady, making sure your

ngers do not cover the ash. If you are taking

a vertically framed picture, turn the camera so

the ash is on top.

3. Looking through the viewnder, frame the

subject as desired.

Push the zoom lever toward W to zoom out.

Push the zoom lever toward T to zoom in.

• Do not obstruct the lens barrel during movement.

4. Center your subject in the focus frame, then

press the shutter-release button partway

down.

6. Turn the camera o after use by sliding the

front cover closed.

If your subject is located outside the focus frame, you can rst lock focus on

your subject, then recompose the picture as desired.

Your camera automatically rewinds the lm into the cassette after the last

exposure.

MANUAL REWIND

CHECKING THE BATTERY POWER

FOR CLOSER SUBJECTS

1. Align the subject within the focus frame and

press the shutter-release button partway

down until the ready lamp glows.

2. Without lifting your nger, recompose the

picture then press the shutter-release

button all the way down to take the picture.

FOCUS LOCK

1. Wait for the lm to completely rewind into the

cassette.

• The frame counter will count down during rewind.

• will appear in the frame counter and will blink

when the lm is rewound.

INSERTING THE BATTERY

REWINDING THE FILM

Your camera uses one 3-volt CR2 lithium battery

to supply power for all camera operations.

1. Open the battery-chamber door

using a coin or similar object.

1. Turn the camera upside down and push

the film-chamber release in the direction

indicated.

• The lm-chamber door will open partway.

2. Insert the cassette into the film chamber.

Use manual rewind to rewind the lm before the roll is nished.

• If no display appears, replace the battery or check that it is inserted correctly.

• To save power, your camera will shut down and retract the lens if it is not operated for

more than eight minutes. Close, then open the front cover again to restore power.

When your subject is closer than 1.0m/3.28ft., align the top of your image with

the close-framing guide, using focus hold if necessary.

• The close-framing guide is not visible in P format.

The ready lamp will blink rapidly and the shutter will lock when you are closer

than the focus distance indicated below.

Focal Length Wide Telephoto

Print Format All C or H P

Focus Distance 0.5m - ∞ 0.5m - ∞ 1.0m - ∞

(1.64ft. - ∞) (1.64ft. - ∞) (3.28ft. - ∞)

5. When the green ready lamp glows, press

the shutter-release button all-the-way down

to take the picture.

• Press the shutter-release button with a slow, steady

squeeze, never a quick jab.

LOADING THE FILM

Step

VEI MEANING

3. Press the film-chamber door closed until it

clicks.

• The camera will automatically advance the film to the

first frame.

• The ISO (film speed) and number of frames remaining on the roll

will be displayed in the data panel.

• Film can be loaded when the camera is on or o.

• If lm is loaded with the camera o, all indicators in the data

panel will disappear after the number of frames remaining is

displayed.

• Do not load lm without an operational battery in the camera.

If blinks in the data panel, open the chamber, then

remove the lm.

- Your camera cannot load a cassette if the current VEI is , , or ◗ ✖ ■.

- If a processed (VEI ) or partially exposed (VEI ) cassette was■◗

loaded into this camera, the VEI has been changed to .✖

• If all indicators blink in the data panel, remove and reload the film. If

the film will not load, contact the nearest authorized Minolta Service

Facility.

Step

FULL AUTO OPERATION

1. Open the front cover to turn the camera on.

• The ash is set to autoash and will re when necessary.

2. Select the print format. The viewnder will

change to match your selection.

2. Turn the camera upside down and push the

lm-chamber release in the direction

indicated.

3. Remove the cassette.

• The lm’s VEI indicator will be .✖

• Do not open the lm chamber until the motor stops and

appears and blinks in the data panel.

1. Gently press the manual rewind button.

2. Follow steps 1- 3 from automatic rewind.

When you turn the camera on, autoash or autoash with red-eye reduction is

set (whichever was last used) so the ash will re automatically in low-light

situations.

FLASH RANGE

The range of the built-in ash depends on the lm speed and the focal length

you are using. To ensure proper exposure, make sure your subject is positioned

within the ash range.

Focal Length ISO 100 ISO 200 ISO400

Wide 0.5 - 3.0 m 0.5 - 5.0 m 0.5 - 7.1 m

1.64 - 9.84 ft 1.64 - 16.4ft 1.64 - 23.29 ft

Telephoto 0.5 - 1.9 m 0.5 - 2.7 m 0.5 - 3.8 m

1.64 - 6.23 ft 1.64 - 8.85 ft 1.64 - 12.46 ft.

The following ash modes can be selected.

Autoash

Autoash with red-eye reduction

Manual ll-ash

Flash cancel

Night portrait

Landscape and

The ash will re with every shutter release regardless of lighting. This can be

used to reduce harsh, unattering shadows on your subject’s face or illuminate

your subject when it is back-lit.

Press the ash-mode button until appears

in the data panel, then take the picture.

With ash-cancel, the ash will not re. This mode should be used when

photographing twilight scenes or subjects that are beyond the ash range.

MANUAL FILL-FLASH MODE

Press the ash-mode button until appears

in the data panel, then take the picture.

• When the ash is canceled, shutter speeds may be

slow. Placing your camera on a tripod is recommended.

In night portrait mode, the camera balances the ash and existing light exposure

so you can take beautiful pictures of people at sunset or at night. The ash is set

to manual ll ash with red-eye reduction.

Press the ash mode button until appears

in the data panel.

• The shutter speed may be slow. Use of a tripod is

recommended.

FLASH CANCEL MODE

In autoash mode, the ash res automatically in low-light situations.

AUTOFLASH MODE

NIGHT PORTRAIT MODE

USING THE BUILT-IN FLASH

SELECTING THE FLASH MODE

Press the ash-mode button until the desired indicator appears in the data panel.

• The ash mode remains after the picture is taken.

RED-EYE REDUCTION MODE

In this ash mode, the ash res automatically in low-light situations and the red-

eye reduction lamp on the front of the camera blinks before the ash res. Red-

eye reduction reduces the “red-eye” eect which occurs when photographing

people in low light.

Press the ash mode button until appears

in the data panel.

• Warn your subject that the red-eye reduction lamp will

blink before the picture is taken.

LANDSCAPE MODE

Use landscape mode to photograph distant scenes that are beyond the range of

the ash or when photographing through glass. The ash is canceled and focus

is set to innity.

Press the ash mode button until and

appear in the data panel.

• The shutter speed may be slow. Use of a tripod is

recommended.

SELF-TIMER

The self-timer delays release of the shutter for approximately 10 seconds after

the shutter-release button is pressed.

1. Place the camera on a tripod and press

the self-timer button until appears in the

data panel.

2. Center your subject in the focus frame,

then press the shutter-release button.

• The self-timer indicator in the data panel and the self-

timer lamp will blink during the countdown, then glow

just before the shutter releases.

• Self-timer is automatically canceled after the shutter is

released.

• To stop the self-timer, press the self-timer button.

Cancel the self-timer mode by turning the camera o

or pressing the self-timer button until disappears

from the data panel.

DATE/TIME IMPRINTING

Your camera records date and time information on the lm’s magnetic strip that

certied photonishers can imprint in the front and back of your photographs.

• Some labs can not imprint date and/or time information on the front of your photographs.

See your photonisher for a full description of available services.

• This camera has a quartz clock and automatic calendar through the year 2029.

IMPRINTING THE DATE OR TIME

Press the date button until the data panel displays the

format you want to see on the print.

*The sequence is as follows:

—> DATE —> TIME —> -- -- -- (no display)

• When -- -- -- is displayed in the data panel, no data

will be printed on the front of the print, but the date

and time of exposure will be imprinted on the back of

the print.

• If the date/time display is blinking, date/time

information will not be imprinted. The date/time

information needs to be reset.

SETTING THE DATE AND TIME

1. Close the front cover to turn the camera off.

2. Press the date button to display the date.

3. Press the select button until the item you

want to change blinks.

• Each press of the select button causes the next item

to blink.

The sequence is:

year - month - date - hour - minute - stops blinking

4. Press the adjust button to change the

blinking item.

• Press and hold the adjust button to change the value

rapidly.

5. Repeat steps 3 and 4 until all items are

correct.

6. Press the date button to set the updated

information.

CHANGING THE DATE/TIME FORMAT

1. Close the front cover to turn the camera

o.

2. Press the date button to display the date.

3. Press and hold the select button until all

items in the date display blink.

4. Press the adjust button to change the

display format.

• The format sequences as follows:

D M`Y —> `Y M D —> M D`Y

5. Press the date button to set the selected

format.

*With the camera on and before taking the picture:

Especificaciones del producto

Marca:	Atlas Sound
Categoría:	sistema de alta fidelidad
Modelo:	TSD-ALC2
Peso.:	505 g
Amable:	Alles-in-één vloeistofkoeler
Nivel de ruido (alta velocidad:	19 dB
Material:	Aluminium, Cooper
Productos compatibles:	NVIDIA GeForce 8800GTX/ Ultra
Conexión(es):	3 Pin
Velocidad de rotación:	1800 RPM
Dimensiones (Ancho x Fondo x Alto):	224.6 x 123.5 x 33.9 mm
Ubicación adecuada:	Videokaart
Vida-útil-del-producto:	40000 uur
Circulación aérea:	14 CFM