AtomoSynth KOE-M6 Manual de Usario

AtomoSynth No categorizado KOE-M6

Lee a continuación 📖 el manual en español para AtomoSynth KOE-M6 (7 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

AtomoSynth Koe M6.

Analog semi modular synthesizer.

Thank you for purchasing the AtomoSynth, KOE M6 desktop edition. Analog semi modular

synthesizer. In order to enjoy long and trouble free use, please read this manual carefully and use the

instrument correctly. After reading this manual, please keep it for later reference.

Precautions

•Using the unit in the following locations can result in a malfunction.

•In direct sunlight.

•Locations of extreme temperature or humidity.

•Excessively dusty or dirty locations.

•Locations of excessive vibration.

•Close to magnetic fields.

•Please use the included power supply, if you are forced to replace it, use a 15V DC. 2A 5.5mm

barrel plug center positive power supply.

•To avoid breakage, do not apply excessive force to the switches or controls.

•If the exterior becomes dirty, wipe it with a clean, dry cloth.

•Do not use liquid cleaners such as benzene or thinner or cleaning compounds or flammable

polishes.

•Keep foreign matter out of your equipment

•Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it

could cause a breakdown, fire, or electrical shock.

•Be careful not to let metal objects get into the equipment.

Basic operation:

•Connect the included power supply to mains and the power supply output to the Koe power

input.

•Turn on the unit by sliding the power switch to the right.

•Please avoid connecting the power supply to mains while the power switch is in the “on”

position (to the right).

•Connect the “AUDIO” output to your mixer or amplifier. Note that the audio output is not

intended to be used with headphones.

•Connect a voltage source (e.g. sequencer, keyboard)to the 1V/Oct input and a gate source to

the Gate input.

•If the Delay module does not start when the unit is turned on, disconnect any cable connected

to the Delay_CV input connector, turn off and then turn the unit on again.

MIDI channel configuration.

•Connect a midi controller (keyboard, sequencer, computer with a usb to midi adaptor) to the

“MIDI” input using the included breakout cable adaptor.

•Push the “Midi Learn” button once, the LED will light.

•Send a midi note from your controller, the red LED will go dark and the Koe will set at the same

midi channel to the controller.

MIDI CC configuration.

•Connect a midi controller (keyboard, sequencer, computer with a usb to midi adaptor) to the

“MIDI” input using the included breakout cable adaptor.

•Push the “Midi Learn” button once, the LED will light.

•Move the desired knob or control in your midi controller, the red LED will go dark and the CC

output will be configured to that midi cc control.

MIDI synchronization of the random generator module.

•Push the “Midi Learn” button for one second until the mode LED flashes 3 times with white

light. The random generator will be synchronized with the incoming midi clock, and the Rate

knob becomes a clock rate multiplier.

•To reverse it and return to the internal clock, push the “Midi Learn” button for one second until

the mode LED lights in white continuously for one second.

Internal Module Controls and connectors:

Oscillator:

•Tune knob: It adjusts about one octave above or below the central pitch.

•Wave switcher: it sets the output of the oscillator to Saw or Pulse waveform.

•FM knob: It adjusts the level of frequency modulation applied to the oscillator, it is internally

connected to the LFO.

•PW knob: it adjusts the width of the pulse waveform.

•PWM_CV input connector: it adjusts the pulse width by voltage.

Especificaciones del producto

Marca:	AtomoSynth
Categoría:	No categorizado
Modelo:	KOE-M6
Color del producto:	Wit
Peso.:	74000 g
Nivel de ruido:	60 dB
Fuente de alimentación:	230V/50Hz
Contrarrestar:	Ja
Dimensiones (Ancho x Fondo x Alto):	580 x 550 x 936 mm
Consumo de energía (típico):	1800 W
hombre volumen:	145 l
Anchura de trabajo:	330 mm
Destruye CD:	Ja
Triturar papel:	Ja
Trituración de tarjetas de crédito:	Ja
Destruye al tamaño:	1.9 x 15 mm
Capacidad de la destructora de documentos:	15 vel
tipo de destructor:	Deeltjesversnippering
Procesa grapas:	Ja
Procesa clips de papel:	Ja
Velocidad de la destructora de documentos:	6000 mm/min
Función de encendido/apagado automático:	Ja
Nivel de seguridad (papel):	4