Audio-Technica ATM-650 Manual de Usario

Lee a continuación 📖 el manual en español para Audio-Technica ATM-650 (5 páginas) en la categoría micrófono. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
artist series live sound microphones
ATM650
Hypercardioid Dynamic Instrument Microphone
Features
Tailored response for musical instrument pickup—guitar cabinets,
snare and other percussion
Rare-earth magnet for improved output and transient response
Special dual-wall oating construction reduces handling noise
and assures consistent performance from mic to mic
Hypercardioid polar pattern provides maximum feedback rejection
and isolation of desired sound source
Multi-stage at-grille design is engineered to enable easy
placement as close as possible to sound source
Rugged all-metal design and construction for years of trouble-
free use
Corrosion-resistant contacts from gold-plated XLRM-type
connector
Quiet-Flex™ stand clamp provides silent, exible microphone
positioning
Description
The ATM650 is a dynamic microphone with a hypercardioid polar pattern.
It is designed specically for musical instrument pickup in the studio and
on stage.
The hypercardioid polar pattern of the microphone is more sensitive to
sound originating directly in front of the element, making it useful for
controlling feedback and reducing pickup of unwanted sounds.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is enclosed in a rugged housing with a multi-stage
at-grille design. The included AT8470 Quiet-Flex™ stand clamp
permits mounting on any microphone stand with 5/8"-27 threads. A soft
protective pouch is also included.
Operation and Maintenance
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
When using the microphone in settings with a stage monitor speaker,
the speaker should be located 135° off axis (45° off the rear of the
microphone). This placement, in conjunction with the microphones
uniform hypercardioid pickup pattern, will virtually eliminate the
possibility of undesired audio feedback.
Take care to keep foreign particles from entering the windscreen. An
accumulation of iron or steel lings on the diaphragm, and/or foreign
material in the windscreens mesh surface, can degrade performance.
Note: Remove the rubber sleeve at the base of the microphone handle
to use the AT8471 isolation stand clamp (not included) for more secure,
permanent installation.
12" or more on axis
LEGEND
Frequency in Hertz
Response in dB
10 dB
100
50 200 10k5k1k500 2k 20k
LEGEND
200 Hz
1 kHz
5 kHz
8 kHzSCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚
150˚
120˚
90˚
30˚
60˚
frequency response: 80 –17,000 Hz polar pattern
To reduce the environmental impact of a multi-language printed document, product information
is available online at www.audio-technica.com in a selection of languages.
An de réduire l’impact sur l’environnement de l’impression de plusieurs langues, les
informations concernant les produits sont disponibles sur le site www.audio-technica.com dans
une large sélection de langue.
Para reducir el impacto al medioambiente, y reducir la producción de documentos en varios
leguajes, información de nuestros productos están disponibles en nuestra página del Internet:
www.audio-technica.com.
Para reduzir o impacto ecológico de um documento impresso de várias linguas, a Audio-Technica
providência as informações dos seus produtos em diversas linguas na www.audio-technica.com.
Per evitare l’impatto ambientale che la stampa di questo documento determinerebbe, le
informazioni sui prodotti sono disponibili online in diverse lingue sul sito www.audio-technica.com.
Der Umwelt zuliebe nden Sie die Produktinformationen in deutscher Sprache und weiteren
Sprachen auf unserer Homepage: www.audio-technica.com.
Om de gevolgen van een gedrukte meertalige handleiding op het milieu te verkleinen, is
productinformatie in verschillende talen on-line” beschikbaar op: www.audio-technica.com.
www.audio-technica.com
ᵜޜਨสҾ߿ቁሩ⧟ໍາⲴᖡ૽ˈሶн֌ཊ䈝䀰᮷⃄Ⲵঠࡧˈᴹޣӗ૱ؑ᚟ਟ൘
www.audio-technica.comⲴᇈᯩ㖁亥к䘹ᤙᡰ኎䈝䀰઼⍿㿸DŽ
Specications
Audio-Technica Corporation
audio-technica.com ©2015 Audio-Technica P#1423-11080B P52569
Dynamic
Hypercardioid
80-17,000 Hz
–56 dB (1.5 mV) re 1V at 1 Pa
300 ohms
279 g (9.8 oz)
164.2 mm (6.46") long,
38.8 mm (1.53") head diameter
Integral 3-pin XLRM-type
T5
AT8470 Quiet-Flex
stand clamp for
5/8"-27 threaded stands; 5/8"-27 to 3/8"-16
threaded adapter; soft protective pouch
Element
Polar pattern
Frequency response
Open circuit sensitivity
Impedance
Weight
Dimensions
Output connector
Audio-Technica case style
Accessories furnished
In the interest of standards development, A.T.U.S.
offers full details on its test methods to other industry
professionals on request.
1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
Specications are subject to change without notice.

Especificaciones del producto

Marca: Audio-Technica
Categoría: micrófono
Modelo: ATM-650

¿Necesitas ayuda?

Si necesitas ayuda con Audio-Technica ATM-650 haz una pregunta a continuación y otros usuarios te responderán




micrófono Audio-Technica Manuales

micrófono Manuales

Últimos micrófono Manuales