AudioControl ACX-300.2 Manual de Usario

AudioControl receptor ACX-300.2

Lee a continuación 📖 el manual en español para AudioControl ACX-300.2 (12 páginas) en la categoría receptor. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
COMPACT HIGH POWER ALL-WEATHER 2-CHANNEL AMPLIFIER
ACX-300.2
Quick Start Guide
Features
• Compact High Power 2-Channel Amplier
• High Current Design
• 2 x 75 Watts @ 4 Ohms
• 2 x 150 Watts @ 2 Ohms
• 1 x 300 Watts @ 4 Ohms, Bridged Mono
• 12 dB/Octave Linkwitz-Riley Alignment Crossover
• GTO™ Signal Sense (Great Turn On)
• 2 Speaker-level / Line-level RCA Inputs
• All-weather IPX6 rated!
• Filled with home-grown audio goodness
2
ACX-300.2
Quick Start Guide
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as muers, silencers, exhaust
pipes, or other apparatus (including ampliers) that produce heat.
9. WARNING: Improper installation may lead to permanent injury or death.
Installation of the apparatus must be done with great care by qualied
personnel, to prevent damage to fuel lines, power and other electrical
wiring, hydraulic brake lines, and other systems, that might compromise
vehicle safety.
10. Provide +12V and Ground wiring of sucient size to ensure adequate
current to the amplier. For the ACX-300.2 this means 8 gauge wire or
thicker.
11. Use rubber grommets to protect wiring whenever passing wires through
metal openings or bulkheads.
12. Only use attachments/accessories specied by the manufacturer.
13. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power
input terminals are damaged or objects have fallen into the apparatus,
does not operate normally, or has been dropped.
14. Fuses shall be replaced only with the correct type and fuse value, and
only when the apparatus is powered o.
15. Exposure to high sound pressure levels may lead to permanent hearing
loss. Take every precaution to protect your hearing.
The lightning ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of
sucient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
Caution: to reduce the risk of electric shock, do
not disassemble the apparatus, other than to
remove the top panel to access the controls.
There are no user-serviceable parts inside.
Refer servicing to qualied personnel.
Recycling notice: If the time comes and this apparatus has fullled
its destiny, do not throw it out into the trash. It has to be carefully
recycled for the good of mankind, by a facility specially equipped
for the safe recycling of electronic apparatii. Please contact your
local or state recycling leaders for assistance in locating a suitable
nearby recycling facility. Or, contact us and we might be able to
repair it for you.
Important Safety Instructions
3
1. Speaker Outputs –
In Stereo operation, connect one loudspeaker to each channel.
The minimum impedance is 2 Ohms per channel.
, connect one loudspeaker to the In Bridged Mono operation
outer 2 wires - White(+) and Grey/Black(-). The mono loudspeaker
will be powered by each channel, and both input channels must
be fed a signal. The minimum impedance is 4 Ohms.
2. Power Input Terminal +12V & Ground – Connect these wires
to the +12V and Negative binding posts of the vehicle battery
via one of two included harness options. You may use either the
included water resistant harness, or the included harness kit to
terminate your own custom-length water-resistant harness. Use
quality insulated wiring of the recommended wire gauge, such as
wire gauge 8 or thicker.
1 2 3
Connections & Control Panel Features

Especificaciones del producto

Marca: AudioControl
Categoría: receptor
Modelo: ACX-300.2

¿Necesitas ayuda?

Si necesitas ayuda con AudioControl ACX-300.2 haz una pregunta a continuación y otros usuarios te responderán


receptor AudioControl Manuales

AudioControl

AudioControl A800.1 Manual de Usario

19 Septiembre 2024
AudioControl

AudioControl A600.4 Manual de Usario

19 Septiembre 2024
AudioControl

AudioControl A1100.5 Manual de Usario

19 Septiembre 2024
AudioControl

AudioControl A1500.1 Manual de Usario

19 Septiembre 2024
AudioControl

AudioControl CM3-750D Manual de Usario

16 Septiembre 2024
AudioControl

AudioControl CM2-750D Manual de Usario

16 Septiembre 2024
AudioControl

AudioControl CM4-750 Manual de Usario

16 Septiembre 2024
AudioControl

AudioControl CM3-750 Manual de Usario

16 Septiembre 2024
AudioControl

AudioControl CM2-750 Manual de Usario

16 Septiembre 2024
AudioControl

AudioControl ACX-300.2 Manual de Usario

10 Septiembre 2024

receptor Manuales

Últimos receptor Manuales

Crown

Crown CDi DriveCore 2|300BL Manual de Usario

27 Octubre 2024
Boss

Boss PT3000 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies PBM120AT Manual de Usario

27 Octubre 2024
Fosi Audio

Fosi Audio V3 Manual de Usario

26 Octubre 2024
Jensen

Jensen CAR710-4BC Manual de Usario

25 Octubre 2024
Onkyo

Onkyo TX-RZ830 Manual de Usario

24 Octubre 2024
Pioneer

Pioneer VSX-1122K Manual de Usario

22 Octubre 2024
Yamaha

Yamaha HTR-5072 Manual de Usario

21 Octubre 2024
NAD

NAD C 355BEE Manual de Usario

20 Octubre 2024
Yamaha

Yamaha RX-A810 Manual de Usario

20 Octubre 2024