Audiovox RC66i Manual de Usario

Lee a continuación 📖 el manual en español para Audiovox RC66i (1 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
The iPod mode icon ( ) lights on
the display.
Playback from the iPod/iPhone starts
automatically.
If no iPod/iPhone is connected
in the iPod mode, the unit will
exit the iPod mode and turn off
automatically.
Universal dock for iPod/iPhone
(push to open or close)
iPhone is a trademark of Apple Inc.
iPod is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
Apple is not responsible for the
operation of this device or its
compliance with safety and regulatory
standards.
“Made for iPod” means that an
electronic accessory has been designed
to connect specifi cally to iPod and has
been certifi ed by the developer to meet
Apple performance standards.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifi cally to iPhone and has
been certifi ed by the developer to meet
Apple performance standards.
Illustrations contained within this
publication are for representation only
and subject to change.
The descriptions and characteristics
given in this document are given as
a general indication and not as a
guarantee. In order to provide the
highest quality product possible,
we reserve the right to make any
improvement or modifi cation without
prior notice.
openings.
The ventilation should not be
impeded by covering the ventilation
openings with items such as
newspaper, table-cloths, curtains etc.
Do not place lighted candles,
cigarettes, cigars, etc. on the
product.
AC/DC adaptor is a disconnect
device. Plug AC/DC adaptor only to
AC power source as marked on the
AC/DC adaptor
Care should be taken so that objects
do not fall into the product.
Do not attempt to disassemble
the cabinet. This product does
not contain customer serviceable
components.
The marking information is located
at the bottom of apparatus.
Caution marking is located at
bottom of apparatus.
The use of apparatus in moderate
climates.
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
ADDITIONAL SAFETY
INFORMATION
In order to disconnect the apparatus
from the mains completely, the
mains plug should be disconnected
from the mains socket outlet
completely.
To be completely disconnect the
power input, the AC/DC adaptor
of apparatus shall be disconnected
from the mains.
The AC/DC adaptor should not be
obstructed OR should be easily
accessed during intended use.
The AC/DC adapter supplied with
this product is intended to be
correctly oriented in a vertical or
oor mount position.
Do not use unauthorized chargers
or power adapters. Use only
chargers that came with your
product or that is listed in the user’s
guide.
Apparatus shall not be exposed to
dripping or splashing and no objects
lled with liquids, such as vases,
shall be placed on the apparatus.
Always leave suffi cient space around
the product for ventilation. Do
not place product in or on a bed,
rug, in a bookcase or cabinet that
may prevent air ow through vent
for better reception.
Station presets
To store a station as preset:
1. Tune to a radio station.
2. Press STORE.
An available preset location
(e.g. ) shows on the display.
3. Press << >> RECALL or (or ) to select
a desired preset location (01 - 20).
4. Press STORE.
shows on the display as
confi rmation.
You can save up to 20 preset
stations.
To recall a preset station:
1. In radio mode, press RECALL.
The existing preset station number
shows on the display.
2. Press << >> RECALL or (or ) to select
a desired preset station.
of the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The
wide blade or
the third prong
is provided for
your safety. If
the provided
plug does
not t into your outlet, consult an
electrician for replacement of the
obsolete outlet.
Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
Only use attachments/accessories
specifi ed by the manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specifi ed
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during
lightning storms or when unused
for long periods of time.
Refer all servicing to qualifi ed
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
To listen to the auxiliary player:
If an auxiliary player (e.g. mp3
player) is connected, press AUX to
select AUX mode and start playback
on your auxiliary player.
To change or check the remaining
time in sleep mode:
Press SLEEP once to check the
remaining sleep time. Press SLEEP
repeatedly to select another sleep
time.
To cancel the sleep mode:
If you decide to turn off the unit
sooner, press or press SNOOZE OFF ,
SLEEP repeatedly to select “OFF”.
user manual
guide de l’utilisateur
EN/F
It is important to read this user manual prior to using your new product for the fi rst time.
Nous vous recommandons de lire ce manuel avant d’utiliser votre nouveau produit
pour la première fois.
RC66i
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
Before you begin General controls
General controls Clock
Clock
Washi ngton
Orego n
Arizona
New Mexico
Texas
Oklaho ma
Kansas
Colorado
Utah
Nevada
Califo rnia
Idaho
Mont ana No rth Dakot a
Nebraska
Minneso ta
Iowa
Missouri
Arkansas
Mississippi Alabama
Louisia na
Florida
Georgia
Wiscons in
Illinois Indiana Ohio
Michigan
New Jersey
New York
Conn.
R.I.
Mass.
N.H.
Main e
Wyoming
Pennsylvania
Virginia
Virginia
West
Dela ware
Md.
Vt.
Caro lina
North Caroli na
South
Olym pia
Boise
Hele na
Salt Lake City
Pierre
Cheyenne
Lincoln
St. Paul
Des Moines
Madi son Lansin g
Harri sburg
Trenton
Provid ence
Hartford
Concord
Albany
Montpeli er
Augu sta
Carso n City
Phoenix
Santa Fe
Denver
Oklaho ma City
Austin
Je fferson Ci ty
Little Rock
Ja ckson
Springfie ld India napolis
Montgo me ry
Colu m bus
Charleston
Colu m bia
Atlanta
Richm ond
Raleig h
Anna polis
Boston
Washingt on, D.C.
Topeka
New York
Chicago
Miam i
Phila del phia
Detroi t
Houston
Dall as
Seattle
Las Vegas
Los Angel es
San Fran cisco
Sacram en to
Mem phis
New Orleans
St. Louis
Baton
Rouge
Salem Bismarck
South Dako ta
Tenness ee
Kentucky
Nash ville
Frankfort
Pacific Mountain Central Eastern
Summer Wint er
Winnipeg
Saskat o o n
Regina
Yukon
Territory
Alberta
Saskatchewan
Manitoba
Ontario
British
Columbia
Quebec
Newfoundland
Northwest Territories Nunavut
Pacific Atlantic
Hawaii-
Aleutian
Alaska
Mountain Central Eastern
Summer Winter
Atlantic
Puerto Rico
(AST)
(EST)(CST)(MST)(PST)
(HST)
(AKST)
(AST)
(EST)(CST)(MST)(PST)
Canadian time zones
US time zones
Radio iPod/iPhone
Wake function
Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near
water.
Clean only with dry cloth.
Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifi ers) that produce heat.
No naked ame sources such as
lighted candles should be placed on
the apparatus.
Do not defeat the safety purpose
Plugging in for power
Connect the supplied power adapter
to the units DC jack, and connect to
a convenient wall outlet.
This clock can also be powered by 4
“AA” batteries. Refer to “Operating
by batteries” section for details.
Refer to the “Clocksection and
follow the instructions to get the
clock time shown correctly with the
Auto Clock set feature.
Battery back-up operation
This clock radio is equipped with a
memory holding system that can
be powered with 2 “AA” batteries
(included and installed). The power
failure protection circuit will not
operate unless battery is installed. When
normal household power is interrupted,
or AC line cord is unplugged, the
batteries will power the clock radio to
keep track of time and alarm settings
programmed into memory. When the
battery backup functions, the digital
display will not light, however, the
function of alarm still occurs during the
power interruption if remaining battery
power is adequate. Normal operation
will resume after AC power is restored
so you will not have to reset the time or
the alarm.
To install or replace the batteries:
1. Sliding the lock switch which
located at the bottom of the clock
radio to the right.
2. Apply thumb pressure to the tab
on battery door and then open the
door.
3. Insert or replace 2 AA batteries.
4. Close the compartment door.
5. Sliding the lock switch to the left to
lock.
It is recommended that you replace
the batteries every year.
It is recommended to plug the
unit for AC power while replacing
batteries to avoid the loss of clock
and wake time/mode settings.
1
2 4
5
Power failure indicator
When AC power is interrupted
(disconnected) for a short period of
time, both time and alarm settings
will change (unless batteries are
installed). After AC power is restored
(reconnected), the Digital Display
will blink to indicate that power was
Top view
Setting clock manually
In case the memory holding batteries
are accidentally removed, set the clock
manually as below:
1. Press SET on the top of the unit
until the clock setting icon
ashes on the display.
2. Press << >> or on the top of the
unit to set the clock time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
The clock setting icon ashes
when you are setting the time. AM
or PM icon also lights beside the
time.
Display brightness
Press repeatedly to adjust BRIGHTNESS
the desired brightness level.
Listening to the radio
To turn on or off radio:
1. Press RADIO on the front of the
unit to turn on the radio.
The radio mode icon ( ) lights on
the display.
2. Press OFF to turn off the radio, or
press AUX or iPod to select another
sound mode.
To select radio band:
In radio mode, press to RADIO
select the radio band (AM/FM).
The selected radio band icon lights
on the display.
To tune frequency:
Press << or >>. The selected
frequency shows on the display.
Press and hold to automatically
search for the next available station.
Antenna
Built-in AFC
The Built-in Automatic Frequency
Control (AFC) works only on FM. It helps
reducing drift on FM reception and
keeping the radio locked in on the FM
station to which it is tuned.
AM Antenna
For AM reception, connect the AM
antenna loop to the back of the radio.
Stretch out the antenna cord to its
fullest length and rotate the antenna
Listening to iPod/iPhone
To connect iPod/iPhone:
1. Push the universal dock for iPod/
iPhone on the front of the unit to
open it.
2. Four adapters are supplied. Check
the table below and use the
appropriate adapter for your iPod/
iPhone.
Models Adapters
iPhone 4 GB, 8 GB, and
16 GB
12
iPod nano (3rd
generation) 4 GB and
8 GB
13
iPod touch 14
iPhone 3G 15
For the latest iPod/iPhone models,
please use the adapter provided
with your iPod/iPhone.
3. Place the adapter and then your
iPod/iPhone on the universal dock
for iPod/iPhone.
To select iPod/iPhone mode:
Press iPod/iPhone on the front of
the unit to select the iPod mode.
To control the playback:
1. During playback, press to iPod
pause the playback and press again
to resume.
2. Press << >>or to skip to the
previous or next le.
Press and hold to search << >> or
backward or forward.
3. Press SHUFFLE to play the les in
random order in the iPod/iPhone.
Press again to cancel the function
(shows on the iPod/iPhone display).
4. Press REPEAT to select a repeat
playback mode (repeat 1 or repeat
all). Press REPEAT until no repeat
mode is selected (shows on the
iPod/iPhone display) to cancel the
repeat playback.
To charge the iPod/iPhone:
You may charge the battery of your
iPod/iPhone through the universal
dock for iPod/iPhone while the unit
is turned off (standby mode) or in
the AUX, Radio (FM band only) or
iPod mode. Charging control should
be operated on the iPod/iPhone. It
is not necessary to charge in iPod
mode, unless you are listening to
the iPod/iPhone.
Set wake time
This unit allows 2 wake times to be set.
1. Press SET on the top of the unit
until a WAKE 1 icon ( or ,
) or a WAKE 2 icon ( or ) ,
ashes on the display.
2. Press << >> or on the top of the
unit to set the wake time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
3. To save and exit the wake setting,
wait for about 5 seconds or press
SET until the clock setting icon (
) is off and the wake setting icons (
/ / or / / ) are either
off or stop ashing.
To check the wake time after
setting, press until a WAKE SET
1 icon ( / / ) or WAKE 2
icon ( / / ) ashes and
the respective assigned wake time
shows on the display.
Select the wake source
You may be woken up by the alarm,
radio, or music from iPod/iPhone.
1. Set a wake time (refer to the above
instructions).
If Waking to Alarm ( , ) is
selected:
Wake to Alarm uses GRAD-U-
WAKE, a gentle increase to the
maximum alarm tone volume over
30 to 45 seconds.
If you set the wake function with
low volume level before going
to bed, we advise using Waking
to Alarm mode to wake you up
since the volume will automatically
increase.
If Waking to RADIO is ( , )
selected:
3. Select a desired wake up radio
channel (refer to “Listening to the
radio”). If no wake up channel is
set, your last listening radio station
will be selected.
4. Adjust the volume to your desired
level.
5. Press to turn off the unit. OFF
SmartSnoozeTM
This operation allows extra sleep time
after the wake function is on. The alarm
will be off by pressing , , SNOOZE VOL +
VOL –, SLEEP NAP or until the snooze
period is over. Snooze function can be
used repeatedly up to 1 hour. After this,
the wake function will turn off until the
next day.
To set the “quiet” period:
While pressing , press or SNOOZE <<
>> on the top of the unit to set the
“quiet” period from 1 to 30 minutes
(default: 9 minutes). Release , SNOOZE
then the “quiet” period is set.
Turn off the wake
function
To silence the wake function
momentarily:
Press SNOOZE. The alarm will sound
again when the snooze period is
over. (refer to “SmartSnoozeTM”).
OR
NAP functionSleep function
In the sleep mode, the radio, iPod or
AUX mode turns off automatically.
To set the sleep time:
1. Press repeatedly to cycle SLEEP
among the sleep time available
(90min, 60min, 30min, 15min and
OFF. Off is the default setting.
When you rst set the sleep time,
the sleep time is default to 90 min).
The icon ashes while selecting.
2. When the desired sleep time is
selected, release and wait for SLEEP
about 5 seconds, the sleep time is
now set.
The icon lights on the display.
To listen to the radio:
The radio turns on by default. If
not, press and select a radio RADIO
station as usual.
To listen to the iPod/iPhone:
iPod << >>Press and then press or
to select a le on the iPod/iPhone.
Playback will be in repeat all les
mode automatically.
If iPod mode is selected in your last
sleep mode setting, the iPod/iPhone
will start to play, instead of the
radio.
The radio will be played whenever
the iPod mode is selected but
without an iPod/iPhone connected.
For catnaps up to 2 hours without
disturbing the regular alarm settings,
the NAP function wakes you up after a
short period of time.
To set the NAP time:
1. Press repeatedly to cycle NAP
among the NAP time available
(10min, 20min, 30min, 60min,
90min, 120min and OFF. 20min is
the default setting. When you rst
set the NAP time, the NAP time is
default to 10 min).
The icon NAP ashes while
selecting.
2. When the desired NAP time is
selected, release and wait for NAP
about 5 seconds, the NAP time is
now set. The current time shows
and the icon lights on the NAP
display.
Only alarm tone is available in the
NAP mode.
To check the remaining NAP time:
Press once to show briefl NAP y the
NAP time left.
To cancel the NAP function:
Press and hold or press NAP NAP
repeatedly to select OFF.
To turn off the NAP alarm:
Press NAP OFF or to stop the NAP
alarm.
Audiovox Electronics Corp.
150 Marcus Blvd., Hauppauge, NY 11788
©2010 Audiovox Electronics Corp.
Trademark(s) ® Registered
Printed in China
To select auxiliary mode:
1. Connect your auxiliary source (e.g.
mp3 player) to the AUX input jack
at the back of the unit with an
audio cable (not supplied).
2. Press AUX to turn on the unit or to
switch to listen to AUX from other
modes.
The auxiliary mode icon ( )
lights on the display.
Adjust the auxiliary player to mid-
range volume and adjust the master
volume on the unit. Do not turn
the volume of the auxiliary player
too high as this may affect the
sound quality. For other playback
operations, control them on your
auxiliary player.
Auxiliary source
Limited warranty
12 Month Limited Warranty
Applies to RCA Audio/Video
Products
AUDIOVOX ELECTRONICS CORP. (the
Company) warrants to the original retail
purchaser of this product that should
this product or any part thereof, under
normal use and conditions, be proven
defective in material or workmanship
within 12 months from the date of
original purchase, such defect(s) will be
repaired or replaced with reconditioned
product (at the Company’s option)
without charge for parts and repair
labor.
To obtain repair or replacement
within the terms of this Warranty, the
product is to be delivered with proof
of warranty coverage (e.g. dated bill
of sale), specifi cation of defect(s),
transportation prepaid, to the Company
at the address shown below.
This Warranty does not extend to the
elimination of externally generated
static or noise, to correction of
antenna problems, loss/interruptions of
broadcast or internet service, to costs
incurred for installation, removal or
reinstallation of product, to corruptions
caused by computer viruses, spyware or
other malware, to loss of media, fi les,
data or content, or to damage to tapes,
discs, removable memory devices or
cards, speakers, accessories, computers,
computer peripherals, other media
players, home networks or vehicle
electrical systems.
This Warranty does not apply to any
product or part thereof which, in the
opinion of the Company, has suffered
or been damaged through alteration,
improper installation, mishandling,
misuse, neglect, accident, or by removal
or defacement of the factory serial
number/bar code label(s). THE EXTENT
OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.
This Warranty is in lieu of all other
express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED
TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH
OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR
ANY OTHER WARRANTY. No person or
representative is authorized to assume
for the Company any liability other than
expressed herein in connection with the
sale of this product.
Some states do not allow limitations on
how long an implied warranty lasts or
the exclusion or limitation of incidental
or consequential damage so the above
limitations or exclusions may not apply
to you. This Warranty gives you specifi c
legal rights and you may also have
other rights which vary from state to
state.
How to make a warranty claim:
If your product is capable of storing
content (such as an mp3 player,
digital voice recorder, etc), it is
recommended to make periodic
backup copies of content stored
on the product. If applicable,
before shipping a product, make
a back up copy of content or data
stored on the device. Also, it is
advisable to remove any personal
content which you would not want
exposed to others. IT IS LIKELY
THAT CONTENTS AND DATA ON
THE DEVICE WILL BE LOST DURING
SERVICE AND REFORMATTING.
AUDIOVOX ACCEPTS NO LIABILITY
FOR LOST CONTENT OR DATA,
OR FOR THE SECURITY OF ANY
PERSONAL CONTENT OR DATA ON
THE RETURNED DEVICE. Product
will be returned with factory
default settings, and without any
pre-loaded content which may have
been installed in the originally
purchased products. Consumer will
be responsible for reloading data
and content. Consumer will be
responsible to restore any personal
preference settings.
Properly pack your unit. Include
any remotes, memory cards, cables,
etc. which were originally provided
with the product. However DO NOT
return any removable batteries,
even if batteries were included
with the original purchase. We
recommend using the original
carton and packing materials.
Include evidence of purchase date
such as the bill of sale. Also print
your name and address and a
description of the defect. Send via
standard UPS or its equivalent to:
Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788
1-877-833-3491
Insure your shipment for loss or
damage. Audiovox accepts no
liability in case of damage or loss en
route to Audiovox.
Pay any charges billed to you by
the Exchange Center for service not
Auto clock set
You do not have to set the clock time as
a built-in automatic time set system is
equipped in this clock powered by 2 AA
batteries (included and installed).
To get the clock time shown
correctly:
1. Plug for power
Plug in the AC/DC adaptor into an
AC power outlet.
2. Select daylight saving
Press and hold on the top of DST
the unit to turn on/off in areas
observing/not observing such time
change.
A confi rmation message
(on) or (off) shows on the
display when you make a selection.
3. Select your time zone
Press TIME ZONE repeatedly on the
top of the unit to cycle through the
time zones (EST > CST > MST > PST
> AKST > HST > AST > EST...). The
default time zone is Eastern (EST)
(refer to the maps on the right).
Warranty information
covered by the warranty.
A new or refurbished unit will be
shipped to you freight prepaid.
What we will do:
Provide you with a new, or at our
option, a refurbished unit. The
exchange unit is under warranty for
the remainder of the original product’s
warranty period.
For Canada Customers, please ship
to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5
2. Press WAKE 1 WAKE 2 or to select
a wake mode. Corresponding icon
lights on the front of the unit.
Wake 1 by alarm
Wake 1 by radio
Wake 1 by iPod/iPhone
Wake 2 by alarm
Wake 2 by radio
Wake 2 by iPod/iPhone
If Waking to iPod/iPhone ( , ) is
selected:
3. Adjust the volume to your desired
level. The last played le on the
iPod/iPhone will be played when the
wake function activates.
4. Press to turn off the unit.OFF
Note: If there is no iPod/iPhone
connected, the alarm tone will sound
instead even if Waking to iPod mode
is selected.
To stop the wake function:
Press OFF. The alarm will be on
again the following day at the same
time.
OR
To disable the wake function
completely:
Press WAKE 1 WAKE 2 or
repeatedly until no corresponding
wake indicator ( or , , , ,
) shows on the display.
The selected time zone shows on
the display briefl y with TIME ZONE
icon ashes on the display.
Your clock is now set and ready
for use.
WARNING: Please avoid playing with
these buttons after entering the Clock/
Alarm set mode.
When the wake
function activates, the
corresponding wake
icon will ash until the wake
function is turned off. The icon
will then stop ashing and keep
lighting up.
When the AC/DC adapter is
disconnected, all wake mode will
be reverted to alarm tone.
Front view
Off
(standby
mode)
Sound source selectionDisplay
RECALL – Recall preset radio stations
STORE – Save radio stations as presets
BRIGHTNESS – Adjust display brightness
REPEAT – Select repeat playback mode for iPod/iPhone
SHUFFLE – Select random playback mode for iPod/
iPhone
WAKE 1 – Activate or change Wake 1 settings
WAKE 2 – Activate or change Wake 2 settings
<< >> or – Search radio frequencies; skip or search music
le in iPod/iPhone; adjust clock time, wake time and
snooze period
SET – Enter setting mode for setting clock time, Wake 1
time or Wake 2 time
TIME ZONE – Time zone selection (refer to “Clock”)
DST – Daylight saving time (refer to “Clock”)
]
Portable Cart Warning
Important battery
precautions
Any battery may present a risk of
re, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
recharged, do not incinerate, and
do not puncture.
Non-rechargeable batteries, such as
alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.
Battery shall not be exposed to
excessive heat such as sunshine, re
or the like.
If your product uses more than one
battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.
Discard any leaky or deformed
battery immediately. They may
cause skin burns or other personal
injury.
Please help to protect the
environment by recycling or
disposing of batteries according to
federal, state, and local regulations.
Attention should be drawn to the
environmental aspects of battery
disposal.
CAUTION (For lithium battery)
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type.
Ecology
Help protect the environment - we
recommend that you dispose of used
batteries by putting them into specially
designed receptacles.
For your records
In the event that service should be
required, you may need the model
number and the serial number. In the
space below, record the date and place
of purchase and the serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
Technical information
Product: Clock Radio
Brand: RCA
Model: RC66i
Electrical consumption
SWITCHING ADAPTER POWER SUPPLY:
AC INPUT: 100 - 240 V ~ 50/60 Hz
DC OUTPUT: 8 V 1.87 A
FCC information
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee
that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
Consult the dealer or an
experienced radio/TV technician for
help.
Modifi cations not expressly approved
by the party responsible for compliance
could void the user’s authority to
operate the equipment.
This Class B digital apparatus
complies with Canadian ICES-003.
Cet appareil numérique de la class
B est conforme à la norme NMB-003
du Canada.
interrupted and you should readjust the
time and alarm settings.
Operating by batteries
This clock radio can be powered by 4
“AA” batteries (not included).
To install or replace the batteries:
1. Apply thumb pressure to the tab
on battery door which located at
the bottom of the clock radio and
then lift the door out and off the
cabinet.
2. Insert or replace 4 AA batteries.
3. Replace the compartment door.
SLEEP – Refer to “Sleep
function”
NAP – Refer to “NAP function”
SNOOZE – Turn off the wake
function momentarily; turn off
the sleep function
VOL – / VOL + – Adjust volume
Battery Level
Battery icon
This clock radio can be powered by
4 AA batteries (not included). When
the unit is disconnected from the
AC power and operates by the 4 AA
batteries, the battery icon will
be lighted to indicate the unit is
operating on battery.
When the unit is reconnected to the
AC power, the battery icon
will not be displayed to indicate the
unit is operating on AC power.
LCD backlight and touch control
keys on the front panel will be
turned on for a while when the
keys are pressed.
iPod/iPhone charging is not
available when operating by
batteries.
Low Battery Level
When the battery level of the 4 AA
batteries is low, the battery icon
will be ashing as an indication. At the
same time, the text “ ” and
” will be fl ashing alternatively for
a while. The Radio, iPod and AUX mode
cannot be accessed. Replace with new
batteries to resume opearation.
When the battery level drops even
lower, the unit will be shut down.
AM ANT – Connect to the AM loop
antenna
AUX IN Auxiliary input jack
DC jack – Connect to the power
adapter
AM loop
antenna socket
Back view Remote control iPod/ – Select iPod mode; start or
pause playback
AUX – Select AUX mode
RADIO/BAND – Select RADIO mode;
select radio band
REPEAT – Select repeat playback mode
for iPod/iPhone
– Adjust display brightness
SHUFFLE – Select random playback
mode for iPod/iPhone
VOL + / - – Adjust volume
STORE – Save radio stations as presets
RECALL – Recall preset radio stations
or – Search radio /TUNE +/-
frequencies; skip or search music le in
iPod/iPhone; adjust clock time, wake
time and snooze period
OFF – Switch to Standby mode
SLEEP – Refer to “Sleep function”
SNOOZE – Turn off the wake function
momentarily; turn off the sleep function
This unit does not have the
charging function. The 4 AA
batteries inserted will not be
charged.
Be sure to replace with new
batteries with the AC power
connected. Otherwise, the
memory of time and alarm settings
may be lost.
iPod/iPhone charging is not
available when operating by
batteries.
3. To save and exit the clock setting,
wait for about 5 seconds or press
SET until the clock setting icon (
) is off and the wake setting icons (
/ / or / / ) are either
off or stop ashing.
Works with:
iPhone 3GS 16GB, 32GB
iPhone 3G 8GB, 16GB
Made for:
iPod touch 2nd generation 8GB,
16GB, 32GB, 64GB
iPod touch 1st generation 8GB,
16GB, 32GB
iPod nano 5th generation 8GB
or 16GB
iPod nano 4th generation
(video) 8GB, 16GB
iPod nano 3rd generation
(video) 4GB, 8GB
iPod classic 80GB, 120GB, 160GB
iPod nano 2nd generation
(aluminum) 2GB, 4GB, 8GB
iPod nano 1GB, 2GB or 4GB
iPod 5th generation (video)
30GB, 60GB, 80GB
iPod mini 4GB, 6GB
iPod 4th generation 20GB, 40GB
iPod 4th generation (color
display) 20GB, 30GB, 40GB, 60GB
v1.0 (1.0.1.0) (EN/F)

Especificaciones del producto

Marca: Audiovox
Categoría: Base/estación de acoplamiento
Modelo: RC66i

¿Necesitas ayuda?

Si necesitas ayuda con Audiovox RC66i haz una pregunta a continuación y otros usuarios te responderán




Base/estación de acoplamiento Audiovox Manuales

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales