Audix M55WS Manual de Usario

Audix micrófono M55WS

Lee a continuación 📖 el manual en español para Audix M55WS (4 páginas) en la categoría micrófono. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

AUDIX M55

INSTALLATION GUIDE

Thank you for choosing Audix! Our products are designed to provide you with many

years of reliable service. Please read this manual before using the system

for optimal installation and operation.

M55 EXPLODED VIEW:

M55 JUNCTION BOX ASSEMBLY

M55

CEILING TILE

WITH 5/8″ HOLE

ADJUSTMENT

NUT TIGHTENS

BY HAND

JBM55 PLENUM

RATED BOX

MALE &

FEMALE

PHOENIX

CONNECTORS

BRASS

STRAIN

RELIEF FOR

OUTER CABLE

SLOTTED

MOUNTING

NUT

• DRILL 5/8 INCH HOLE IN THE CEILING TILE.

• OPEN JMB55 BOX LID AND PLACE BOX ON TOP OF 5/8 INCH HOLE IN THE CEILING TILE. (SEE #1)

• INSERT M55 THREADED CEILING MOUNT THROUGH CEILING TILE AND INTO THE JBM55 BOX

• SECURELY TIGHTEN THE KNURLED NUT. (SEE #2)

• INSERT PLENUM WIRE (BELDEN 9451P OR 82761 OR EQUIVALENT THROUGH STRAIN RELIEF

(SEE #3) AND TERMINATE TO MATING PHOENIX CONNECTOR. (SEE #4 AND #5)

• TIGHTEN STRAIN RELIEF AND CLOSE LID OF JMB55 BOX. (SEE #5)

• LOOSEN M55 KNURLED NUT, ADJUST CABLE TO APPROXIMATE DESIRED LENGTH, AND TIGHTEN

NUT. (SEE #6)

• TIGHTEN THE PLENUM CABLE STRAIN RELIEF NUT AND ARRANGE EXCESS M55 WIRE IN BOX

AND CLOSE LID.(SEE #7)

• FINE ADJUSTMENTS TO MICROPHONE HEIGHT CAN BE MADE EASILY FROM BELOW CEILING BY

LOOSENING THE M55 KNURLED NUT, LENGTHENING/SHORTENING WIRE AND RETIGHTENING

KNURLED NUT. (SEE #8)

BOTTOM VIEW OF

JUNCTION BOX

INSTALLATION AND WIRING

INSTRUCTIONS FOR AUDIX M55

CEILING MICROPHONES

Open lid of JBM55 box and

place on top of ceiling tile

drilled hole.

Wiring:

1 = Ground

2 = Blue (+)

3 = Yellow (-)

Insert ceiling mount through ceil-

ing tile hole, and into JBM55 box

then tighten the knurled nut.

Connect Phoenix terminals. Loosen M55 knurled nut (above),

adjust cable to approximate

desired length, and tighten nut.

Insert plenum wire through

strain relief nut, then connect to

the Phoenix terminal.

Recommended cable:

Belden 9451P - .124” O.D. or

Belden 82761 - .116” O.D.

Tighten the strain relief nut.

Arrange excess wire in box

and close lid.

For nal adjustment, loosen

knurled nut, adjust cable

length, and tighten nut.

For further information contact Audix at 503.682.6933

www.audixusa.com

2121

7 8

Especificaciones del producto

Marca:	Audix
Categoría:	micrófono
Modelo:	M55WS
Color del producto:	Zwart
Amable:	Alles-in-één vloeistofkoeler
numero de fans:	3 ventilator(en)
Color de la iluminación:	Blue, Green, Red
Ubicación adecuada:	Processor
Zócalos de procesador compatibles:	LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2066, Socket AM4, Socket TR4
Soporte de modulación de ancho de pulso:	Ja
Ventilador de alimentos (ancho x fondo x alto):	120 x 120 x 25 mm
Longitud del tubo:	400 mm
Velocidad del ventilador (máx.):	2000 RPM
Material del bloque de agua:	Koper
Material del radiador:	Aluminium
Velocidad del ventilador (mín.):	600 RPM
Ancho del radiador:	394 mm
Profundidad del radiador:	120 mm
Altura del radiador:	27 mm
Ancho del bloque de agua:	72 mm
Profundidad del bloque de agua:	36 mm
Altura del bloque de agua:	86 mm
ventilador de presión estática:	1.42 mmH2O
Tecnología de rodamientos de ventilador:	Vloeistof dynamisch lager (FDB)