Aurora AS610C Manual de Usario
Aurora
trituradora de papel
AS610C
Lee a continuación 📖 el manual en español para Aurora AS610C (3 páginas) en la categoría trituradora de papel. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/3
Warranty
Your Aurora shredder comes with a 12 months return to base warranty, please contact your supplier
for further details.
Aurora warrants all parts of the machine to be free from defects in materials and workmanship for a
period of 1 year from the date of the purchase by the original consumer. If the shredder is found to
be defective d ing the warranty period the sole and exclusive remedy will be the repair or ur
replacement at Aurora’s option and expense.
Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential damages
attributable to the product. The liability of Aurora Electronics (UK) Ltd is limited to the cost of the
repair/replacement of the unit under warranty.
The warranty shall be immediately invalidated if unauthorized repairs or modifications are made, if
the machine has been abused or mishandled, if the product has been re-sold, or if the product has
not been operated in accordance with the instructions contained in this document.
The warranty is in addition to and does not diminish the consumer’s statutory or legal rights.
Aurora Electronics (UK) Ltd.
Units 1 & 2, Shires Industrial Estate,
Essington Close,
Lichfield,
Staffordshire.
WS14 9AZ
Email: sales@aurora-ltd.co.uk
www.aurora-ltd.co.uk
■
■
■
■■ Maintenance
1 Empty the waste bin frequently. .
2. Reversing the shredder often helps to clear a buildup of paper dust and particles, always ensure the
waste bin is not full before reversing.
■
■
■
■■ FAQ & Troubleshooting
If you experience problems with your shredder please try some of the solutions below nder no . U
circumstance should you attempt to open the shredder unit, this will expose you to a risk of electric
shock and will invalidate your warranty.
● Problem 1-The shredder fails to operate
Is the shredder connected at the mains and is the power turned on?
Is the shredder switch set to auto ? ‘ ’
Is the shredder located correctly on top of the b ? (Press down firmly on the shredder head to ensure in
it is in the correct position).
Is enough paper being inserted into the machine?-(Very thin or damp paper will cause the auto switch
to not operate).
Has the shredder over heated? (Turn off at the mains and leave to cool down for 60 minutes then try
again).
Has the shredder blown a fuse? (Turn off at the mains and try replacing the fuse in the mains plug).
● Problem 2-The shredder will not stop working
The shredder is designed operate for a couple of seconds after paper has cleared the machine this is to
normal and helps clear paper through the cutting heads.
If the shredder continues to work after a shredding cycle and does not stop then this is either;
1. The waste b is full. You should empty the b or compact the shredded paper. in in
2. Some paper is blocking the auto sensor, try clearing it by reversing and then returning the
switch to auto or by shredding some more paper. Always ensure the waste bin is not full
before reversing.
3. Glue from envelopes or label s is making the sensor lever stick. You should not shred ’
gummed envelopes or sticky labels, try cleaning and lubricating the shredder with Aurora
SP1000 Lubrication and sharpening sheets, see above.
●
●
●
●● Problem 3-The shredder has jammed whilst shredding
Empty the waste bin and try reversing the unit to clear the jam.
If this does not work disconnect power, trim off paper above and below the jam, reconnect
power and try alternating between reverse and auto until the jam clears.
If at any point the shredder stops working during this process it has probably over heated and
will need to cool down for 60 minutes.
Please be careful not to exceed the maximum paper capacity and feed the paper in straight,
please be aware damage caused to the shredder by inserting too much paper or by failing to shred
using a straight paper path is classed as misuse and invalidates your warranty.
Never attempt to clear paper jams by inserting implements into the shredder or by opening
the unit.
User Manual for the AS610C Aurora Shredder
IMPORTANT!
READ ALL INSTRUCTIONS BEFORE USE
Thank you for purchasing the AS610C Paper Shredder. This product is designed to shred paper and
small staples it will also accept small paper clips and credit cards. It does not shred adhesive labels,
self-seal envelopes, transparencies, fabrics, glossy paper, newspaper, plastic (other than credit cards),
cardboard or continuous forms. Please note that using it for these purposes is likely to cause damage
and will invalidate your warranty. This paper shredder is not designed to shred large volumes so
please refer to the recommended usage capacity quoted below. You may find paper particles in the bin
when first opening the shredder this is a result of QC testing procedures.
Recommended Daily Usage = 25 passes per day. (2 minutes on/20 minutes off)
■
■
■
■■ Safety Instructions
1. Before use inspect the shredder, mains cable and plug for damage or defects.
2. Locate the shredder away from heat and water sources.
3. Ensure the switch is set to off before connecting to the mains. ‘ ’
4. Always keep ties, loose clothing, jewelry and long hair away from the shredder.
5. Keep children and pets away from the shredder.
6. Disconnect from the mains when not in use or when emptying or cleaning.
7. Do not insert fingers or objects into the shredder at any time.
8. Never attempt to dismantle the shredder for any reason, please return to an authorized
service agent for repair or servicing.
9. Never dispose of flammable chemicals or materials that have come into contact with
flammable chemicals (for example nail polish, acetone and petroleum) in the shredder bin.
Never use flammable oils, petroleum based products or flammable aerosols of any kind in
the vicinity of the machine including compressed air dusters.
■
■
■
■■ Operational Instructions
1. Remove all packaging and install the shredder unit on top of the waste bin ensuring it
locates firmly in position. There is a safety cut out on the shredder head to prevent
operation when not safely located on the waste bin, the shredder will not operate unless
placed correctly on the waste bin. The shredder will only operate with the waste bin
provided.
2. Please slide the switch to Auto the shredder is now in standby mode. “ ”,
3. The shredder will start automatically when paper is fed into the paper entry slot.
4. Ensure paper is fed in using a straight paper path, avoid feeding paper at an angle as this
will cause the paper to curl and fold as it enters the shredder, multiplying the number of
sheets passing through the blades and is likely to result in a jam.
5. Do not enter more sheets paper than stated on the shredder at one time. Sheet capacity is of
based on a paper thickness of 75 gsm. Thicker paper will reduce the amount of sheets the
shredder can shred in one go, as will the presence of staples or paperclips.
6. Do not operate continuously for more than 2 minutes.
7. Prolonged shredding will cause the unit to overheat and shut down. This is not a fault and
indicates the unit has reached its maximum temperature tolerance, turn the unit off at the
mains and allow it to cool down for 60 minutes before resuming normal operati on.
8. If the amount of paper inserted is too much or is not fed in straight then the shredding speed
will slow or even stop. If this stop shredding and use the reverse function to clear happens
the jam. Always ensure the waste b is not full before reversingin .
9. To shred a credit card insert the credit card in to the cent of the paper entry slot. You re
should only shred one credit card at a time. The shredder is designed for the occasional
shredding of credit cards.
3. It is not essential to oil an Aurora shredder
however regular lubrication will extend the life of
your shredder, prevent an increase in noise and
help to keep the shredder in optimum working
condition. We recommend using the ‘Aurora
SP1000 Shredder Lubrication and Sharpening
sheets’ at least once a month to keep your
shredder blades lubricated and free from a
buildup of paper dust. The Aurora SP1000
sheets also contain a special grinding powder
that will keep your shredder blades sharp.
These are available from your supplier in packs
of 12.
Especificaciones del producto
| Marca: | Aurora |
| Categoría: | trituradora de papel |
| Modelo: | AS610C |
¿Necesitas ayuda?
Si necesitas ayuda con Aurora AS610C haz una pregunta a continuación y otros usuarios te responderán
trituradora de papel Aurora Manuales
2 Septiembre 2024
1 Septiembre 2024
trituradora de papel Manuales
- trituradora de papel Honeywell
- trituradora de papel Acco
- trituradora de papel Nedis
- trituradora de papel Sencor
- trituradora de papel United Office
- trituradora de papel Genie
- trituradora de papel Deli
- trituradora de papel Eldom
- trituradora de papel Hama
- trituradora de papel Kensington
- trituradora de papel Ideal
- trituradora de papel Digitus
- trituradora de papel Olympia
- trituradora de papel GBC
- trituradora de papel Peach
- trituradora de papel Insignia
- trituradora de papel Fellowes
- trituradora de papel Camry
- trituradora de papel Primo
- trituradora de papel Rexel
- trituradora de papel DESQ
- trituradora de papel Leitz
- trituradora de papel HSM
- trituradora de papel Acco-Rexel
- trituradora de papel Dahle
- trituradora de papel Duronic
- trituradora de papel Kogan
- trituradora de papel Brasq
- trituradora de papel D-Mail
- trituradora de papel OTTO
- trituradora de papel Bonsaii
Últimos trituradora de papel Manuales
27 Octubre 2024
27 Octubre 2024
25 Octubre 2024
25 Octubre 2024
15 Octubre 2024
8 Octubre 2024
5 Octubre 2024
2 Octubre 2024
29 Septiembre 2024
24 Septiembre 2024