Avantco BMFW3 Manual de Usario
Avantco
plato calentador
BMFW3
Lee a continuación 📖 el manual en español para Avantco BMFW3 (5 páginas) en la categoría plato calentador. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/5
08/2019
Please note this unit must be installed by a qualied person!
Unpacking:
1. Remove the bain marie and operaon manual from the packaging.
2. Remove all packaging materials and protecve coverings, including the protecve plasc coang
on all stainless steel, from the bain marie.
3. Wipe all surfaces with a clean, sanized cloth.
4. Check unit for damage. Immediately nofy your dealer if the bain marie is damaged.
Installaon:
1. Remove all components from shipping container. (Fig. 1)
2. Using the screws secure the right & le parts on the tank body. (Fig. 2)
3. Put one piece of glass into the hook of the right & le parts. (Fig. 3)
4. Put the 2 long poles into the holes of the right & le parts. And put another piece of glass
between the long poles and the right & le parts. Secure the 4 screws. (Fig. 4)
5. Bain marie is ready for use. (Fig. 5)
Fig. Fig. Fig. 1 2 3
Fig. Fig. 4 5
The unit must be connected to a power point with compable power rang.
1. The unit is equipped with a heang element. Add adequate water inside the tank.
2. Rotang the thermostat knob. Do not use the bain marie unl the pre-heat cycle has elapsed
as you will not achieve opmum product holding capabilies.
3. Place the cooked or heated product into gastronorm food pans and place into
bain marie tank.
4. Cover the pans with correct gastronorm lids to suit.
5. Keep close aenon to the temperature of the food product. If the product is too hot it will
out and if the product is too cold it will deteriorate.
6. Dial thermostat models - adjust the thermostat by rotang the dial to desired temperature.
To maintain appearance and increase the service life, the bain marie should be cleaned
at least daily.
1. Before cleaning or moving, unplug the unit and let it cool completely.
2. Carefully empty the water from the well.
3. Wipe the enre well interior with a clean, damp cloth.
4. To avoid damaging the well nish, do not use abrasive materials, scratching cleansers or
scouring pads to clean water deposits from well.
5. If soap or chemical cleansers are used, be sure they are completely rinsed away with clear
water, immediately aer cleansing. Chemical residue could damage warmer.
6. Every two hours, remove pan and check the water level.
DO NOT IMMERSE BAIN MARIE IN WATER OR OTHER LIQUID.
DO NOT SPRAY WITH WATER OR CLEANING PRODUCT. LIQUID COULD ENTER THE
ELECTRICAL COMPARTMENT AND CAUSE A SHORT CIRCUIT OR ELECTRIC SHOCK.
!
Especificaciones del producto
| Marca: | Avantco |
| Categoría: | plato calentador |
| Modelo: | BMFW3 |
¿Necesitas ayuda?
Si necesitas ayuda con Avantco BMFW3 haz una pregunta a continuación y otros usuarios te responderán
plato calentador Avantco Manuales
27 Agosto 2024
25 Agosto 2024
plato calentador Manuales
- plato calentador Inventum
- plato calentador Topcom
- plato calentador Ariete
- plato calentador Bartscher
- plato calentador Salton
- plato calentador Tristar
- plato calentador Waring Commercial
- plato calentador Hendi
- plato calentador Steba
- plato calentador Beem
- plato calentador Rommelsbacher
- plato calentador Crock-Pot
- plato calentador Bifinett
- plato calentador Proctor Silex
- plato calentador Saro
- plato calentador CaterChef
- plato calentador Chefman
- plato calentador Max Pro
- plato calentador Wells
- plato calentador APW Wyott
- plato calentador Hatco
- plato calentador Merco
- plato calentador Alto-Shaam
- plato calentador Casselin
- plato calentador Benchmark USA
- plato calentador Royal Catering
- plato calentador Brentwood
Últimos plato calentador Manuales
14 Octubre 2024
5 Octubre 2024
24 Septiembre 2024
24 Septiembre 2024
21 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024