AvaTime 9142DT24H Manual de Usario

AvaTime No categorizado 9142DT24H

Lee a continuación 📖 el manual en español para AvaTime 9142DT24H (1 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Before Use: Carefully remove plastic strip from battery compartment.

This is included to preserve battery life. Remove ﬁlm from LCD display.

Cleaning and Care: Hand wash only. Do not immerse in water or put in

the dishwasher.

9142DT24H

To Select Alarm:

• Slide the switch located on the back of the timer for either alarm mode or silent, red LED ﬂashing light mode.

To Select Mode:

• Press MODE to select the Clock, Timer, or Alarm Clock modes.

Clock Mode:

• To Program Clock:

1. To begin set up, press and hold START/STOP for 4 seconds until the colon no longer ﬂashes.

2. Press MODE to toggle between 12 hour and 24 hour clock.

3. Press HOUR, MIN, and/or SEC to set the desired time. Press and hold each button for fast advance.

4. Press START/STOP to save.

Timer Mode:

• To Program Timer 1:

1. Press T1/T2 to select Timer 1. The Timer 1 icon will be on the display.

2. Press HOUR, MIN, and/or SEC for desired time. Press and hold each button for fast advance.

3. Press START/STOP to start the count down. Press again to pause and resume the count down.

4. When time counts down to zero, the alarm will sound or the light will ﬂash. “TIMES UP” and the Timer 1 icon will

ﬂash on the display. Press any button to stop the alarm/light. The alarm/light will automatically turn o after 1 minute,

but the “TIMES UP” and Timer 1 icon will continue to ﬂash until any button is pressed.

5. After pressing any button to stop the alarm/light, the timer will recall the previous selected time.

6. To clear the time back to zero, press HOUR and MIN simultaneously.

• To Program Timer 2:

1. Press T1/T2 to select Timer 2. The Timer 2 icon will be on the display.

2. Follow timer setting instructions as listed under Timer 1.

3. When both timers are in use, press T1/T2 to toggle between both timers. The icon on the display will indicate which

timer is active. Note: a timer must be active to adjust the time or pause and resume time.

4. To view other modes while counting down, press MODE to enter the Alarm Clock or Clock modes. “TIMER” will ﬂash

on the display to show the timer is still counting down. When a timer reaches zero, the alarm will sound or the light

will ﬂash, and “TIMES UP” and the Timer icon will ﬂash. Press any button stop the alarm/light.

• To Count Up:

1. Timer 1 and Timer 2 can be used as count up timers starting from zero. Press START/STOP to start counting up. Press

again to pause and resume the count up. The total count up time is 23 hours, 59 minutes, and 59 seconds. After the

total count up time is reached, the timer will return back to zero and restart the count up.

2. To clear the time back to zero, press HOUR and MIN simultaneously.

3. To view other modes while counting up, press MODE to enter the Alarm Clock or Clock modes. “COUNT-UP” will

ﬂash on the display to show the timer is still counting up.

Alarm Clock Mode:

• To Program Alarm Clock:

1. Press HOUR, MIN, and/or SEC to set the desired time. Press and hold each button for fast advance.

2. Press START/STOP to save. The colon will begin ﬂashing.

3. When the clock reaches the desired time set, the alarm will sound or the light will ﬂash. “TIMES UP” and the clock

icon will ﬂash on the display. Press any button to stop the alarm/light. The alarm/light will automatically turn o after 1

minute, but the “TIMES UP” and clock icon will continue to ﬂash until any button is pressed.

INSTRUCTIONS

Digital Dual Event Timer with Clock

Especificaciones del producto

Marca:	AvaTime
Categoría:	No categorizado
Modelo:	9142DT24H
Color del producto:	Zwart
Ancho:	134.9 mm
Profundidad:	273.3 mm
Altura:	147.8 mm
Indicadores LED:	Activity, HDD, Power
Certificados de sostenibilidad:	RoHS
numero de fans:	1 ventilator(en)
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	1
Tipo de vivienda:	Tower
Capacidad de la unidad de fuente de alimentación (PSU):	150 W
Unidades de almacenamiento instaladas:	Nee
Capacidad total de almacenamiento instalada:	0 TB
Capacidad máxima de almacenamiento admitida:	- TB
Interfaz de disco de almacenamiento:	Serial ATA, Serial ATA II, Serial ATA III
Tamaño del disco de almacenamiento:	2.5 "
Ratio de transferencia:	6 Gbit/s
Número de unidades de almacenamiento admitidas:	4
Bahías de unidades de intercambio en caliente:	Ja
Tipos de unidades de almacenamiento compatibles:	HDD