Avocent Cybex SC M185DP Manual de Usario
Lee a continuación 📖 el manual en español para Avocent Cybex SC M185DP (2 páginas) en la categoría Cambiar. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Cybex™ SCM100 SeRIeS
SeCuRe deSktop MatRIx
Quick Installation Guide
590-1990-501A 1
CybexTM SCM 185DP Secure Desktop Matrix Switch Shown
Before installing your Vertiv™
Cybex™ SCM100 Series Secure
Desktop Matrix switch, ensure the
following:
• The front panel is visible to the
user.
• The tamper evident labels are
all intact.
WARNING: The switch is equipped
with active intrusion protection.
Tampering may permanently
disable the switch and void the
warranty. If the enclosure appears
to have been tampered with or if all
the port LEDs flash sequentially,
please contact Technical Support.
The switch also has tamper evident
seals. Broken or removed seals will
void the warranty.
1. Connecting local
peripherals
Turnoallcomputersand
displays to be used with the
switch. Plug the monitor cables,
the keyboard and mouse cables
and speaker or headset cable
into the appropriate CONSOLE
ports on the back of the switch
.
2. Connecting a Dedicated
Peripheral Port (DPP)
device
NOTE: The device must be
compliant with USB 1.1 or USB
2.0 standards and included in
the administrator-defined list of
recognized devices.
Connect a USB device, such as
a smart card reader, to the blue
USB Type-A CONSOLE port on
the back of the switch.
NOTE: The DPP status LED
illuminates green when the
switch is on and connected to a
recognized USB device. If only
some computers use the DPP
functionality, connect the USB
device to computer 1 and
configure the channels and
computer mapping accordingly.
3. Connecting each
computer
Using a USB cable, connect
each computer to the USB
keyboard/mouse Type-B port
on the switch. Plug the monitor
cable from the corresponding
computer into the appropriate
port on the switch. If
applicable, connect an audio
cable from the computer’s
audio output to the switch’s
audio connection. If using DPP,
12
34
To contact Vertiv Technical Support: visit www.VertivCo.com
© 2018 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names,
trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no
responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specications are subject to change without notice.
Cybex™ SCM100 SeRIeS SeCuRe deSktop MatRIx
Quick Installation Guide
2 590-1990-501A
use a second USB cable to
connect each computer to the
second corresponding USB
Type-B port on the switch.
Repeat for all computers.
NOTE: The USB cables must
be connected directly to a free
USB port on your computer
with no USB hubs or other
devices in between.
4. Turning on the displays,
switch and computers
NOTE:
Installation of local
peripherals to the switch
console must occur prior to
powering up the switch.
Turn power on to the
connecteddisplaysrst,then
plug one end of the provided
power cord into the switch and
the other end into a wall outlet.
The display diagnostic LED
should be solid green a few
seconds after power is applied.
This indicates the display EDID
(ExtendedDisplayIdentication
Data) information is captured
and secured. Lastly, turn on the
computers. Ensure the
peripherals for each computer
are connected and working
properly. Repeat for all
computers.
Supported Hardware
The switches support most DVI-I,
HDMI, DisplayPort monitors and
video cards (adaptors may be
required), headsets and speakers.
The console keyboard/mouse and
DPP inputs are USB Type-A. The
computer keyboard, mouse and
DPP ports are USB Type-B.
NOTE: Do not connect a
microphone, including a headset
with an integrated microphone, to
the switch’s audio output port.
NOTE: Do not connect wireless
mice or keyboards to the switch.
For security reasons, this switch
does not support wireless
hardware.
Cables
It is recommended to use Vertiv
cable kits with your switch to
ensure optimal security and
performance.
Contact a Vertiv representative for
ordering details.
Especificaciones del producto
| Marca: | Avocent |
| Categoría: | Cambiar |
| Modelo: | Cybex SC M185DP |
¿Necesitas ayuda?
Si necesitas ayuda con Avocent Cybex SC M185DP haz una pregunta a continuación y otros usuarios te responderán
Cambiar Avocent Manuales
9 Septiembre 2024
9 Septiembre 2024
9 Septiembre 2024
9 Septiembre 2024
9 Septiembre 2024
9 Septiembre 2024
9 Septiembre 2024
9 Septiembre 2024
9 Septiembre 2024
9 Septiembre 2024
Cambiar Manuales
- Cambiar Honeywell
- Cambiar Yamaha
- Cambiar Abus
- Cambiar Alcatel
- Cambiar Alecto
- Cambiar Apc
- Cambiar Alpine
- Cambiar Ansmann
- Cambiar Edimax
- Cambiar Intermatic
- Cambiar Brennenstuhl
- Cambiar Hikvision
- Cambiar Generac
- Cambiar Silvercrest
- Cambiar Nedis
- Cambiar Asus
- Cambiar Eminent
- Cambiar Renkforce
- Cambiar TP Link
- Cambiar Manhattan
- Cambiar Black Box
- Cambiar Elro
- Cambiar KlikaanKlikuit
- Cambiar Ei Electronics
- Cambiar Tripp Lite
- Cambiar DataVideo
- Cambiar Schneider
- Cambiar Chamberlain
- Cambiar Sylvania
- Cambiar Velleman
- Cambiar Tork
- Cambiar Totolink
- Cambiar Vemer
- Cambiar Profile
- Cambiar Cisco
- Cambiar Matrox
- Cambiar Steren
- Cambiar Perel
- Cambiar Engenius
- Cambiar Plantronics
- Cambiar Digitus
- Cambiar Kathrein
- Cambiar AV:link
- Cambiar Belkin
- Cambiar Linksys
- Cambiar Dahua Technology
- Cambiar Audiovox
- Cambiar Netgear
- Cambiar LevelOne
- Cambiar Kaiser
- Cambiar QNAP
- Cambiar Boss
- Cambiar Shimano
- Cambiar Goobay
- Cambiar Hager
- Cambiar Mercusys
- Cambiar Chacon
- Cambiar Elation
- Cambiar Sygonix
- Cambiar Planet
- Cambiar ZyXEL
- Cambiar Rex
- Cambiar Clas Ohlson
- Cambiar Powerfix
- Cambiar Tesla
- Cambiar EVE
- Cambiar D-Link
- Cambiar Tenda
- Cambiar UPM
- Cambiar Finder
- Cambiar Delta Dore
- Cambiar Ubiquiti Networks
- Cambiar EBERLE
- Cambiar Grasslin
- Cambiar Eaton
- Cambiar Jung
- Cambiar CyberPower
- Cambiar Basetech
- Cambiar Trendnet
- Cambiar Mikrotik
- Cambiar WHALE
- Cambiar ATen
- Cambiar Fibaro
- Cambiar RGBlink
- Cambiar Gefen
- Cambiar Nexa
- Cambiar Adder
- Cambiar Wago
- Cambiar Homematic IP
- Cambiar Monoprice
- Cambiar OSD Audio
- Cambiar SPC
- Cambiar Crestron
- Cambiar Unify
- Cambiar ORNO
- Cambiar Berker
- Cambiar Provision ISR
- Cambiar Monacor
- Cambiar PCE
- Cambiar Logilink
- Cambiar Smart-AVI
- Cambiar StarTech.com
- Cambiar SIIG
- Cambiar Advantech
- Cambiar IOGEAR
- Cambiar Micro Connect
- Cambiar Extron
- Cambiar KanexPro
- Cambiar Blustream
- Cambiar Intellinet
- Cambiar Ebode
- Cambiar Lancom
- Cambiar Robbe
- Cambiar B-tech
- Cambiar Speaka
- Cambiar Kopp
- Cambiar Vimar
- Cambiar Kemo
- Cambiar GAO
- Cambiar H-Tronic
- Cambiar Legrand
- Cambiar Kraus & Naimer
- Cambiar Noble
- Cambiar Intertechno
- Cambiar Ecler
- Cambiar Inverto
- Cambiar Triax
- Cambiar Kramer
- Cambiar CYP
- Cambiar Suevia
- Cambiar Phoenix Contact
- Cambiar Maclean Energy
- Cambiar SmartAVI
- Cambiar Cudy
- Cambiar Lindy
- Cambiar Atlona
- Cambiar Adviti
- Cambiar Hamlet
- Cambiar Paladin
- Cambiar Equip
- Cambiar Noark
- Cambiar Vivolink
- Cambiar Cambium Networks
- Cambiar 2USB
- Cambiar Roline
- Cambiar KVM-TEC
- Cambiar AMX
- Cambiar BZBGear
- Cambiar STI
- Cambiar Epiphan
- Cambiar Mach Power
- Cambiar Axing
- Cambiar Juniper
- Cambiar Raritan
- Cambiar ConnectPro
- Cambiar SunBriteTV
- Cambiar Atlantis Land
- Cambiar GEV
- Cambiar Pizzato Elettrica
- Cambiar Baco
- Cambiar SEADA
- Cambiar Doepke
- Cambiar Comet
- Cambiar IPGARD
- Cambiar CSL
- Cambiar Setti+
- Cambiar PureLink
Últimos Cambiar Manuales
27 Octubre 2024
27 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024