Axxess AXI-RGB1 Manual de Usario

Lee a continuación 📖 el manual en español para Axxess AXI-RGB1 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
AXi-RGB1 INSTALLATION MANUAL
Tech Support: 844-AXX-ESSI WWW.AXXESSINTERFACES.COM
AXi-BMW18-R AXi-CRVT-R AXi-FL24-R
AXi-GM1-R AXi-GM2-R AXi-GMTOUCH-R
AXi-HA12-R AXi-HA20-R AXi-HA32-R
AXi-HON1-R AXi-NI24-R AXi-NI1-R
AXi-NI2-R AXi-TL10-R AXi-UNIHAR-R
COMPATIBLE PLUG & PLAY WIRING HARNESSES
Rev. 4.0 081915
PLEASE REVIEW THIS INSTALLATION MANUAL
CAREFULLY BEFORE BEGINNING ANY WORK
2
Table Of Contents
………………………………….……….
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT IMPORTANT WARNING
WARNING
WARNING
WARNINGWARNING
This product includes instructions for installation which must be carefully
followed. The instructions are worded in such a manner to assume that the
installer is capable of completing these type of electronic installations. If you
are unclear as to what you are instructed to do or believe that you do not
understand the instructions so as to properly and safely complete the
installation you should consult a technician who does have this knowledge and
understanding.
Failure to follow these instructions carefully and to install the interface as
described could cause harm to the vehicle or to safety systems on the vehicle.
Interference with certain safety systems could cause harm to persons as well.
If you have any questions in this regard please call the Metra Help line at
1-844-299-3774 and for ordering questions call Metra at 1-800-221-0932.
PRECAUTIONS.……………………………………..…...3
WIRING LEGEND AND DESCRIPTION…….……..4
ASSIGNMENT OF SWITCHES…………………...….5
FAQ……………………………………….…….……...6
QUICK START GUIDE …………………………....…...7
3
.
PRECAUTIONS: Please read before you start the installation
Please study these instructions carefully before installing
AXXESS.i interface.
Many new vehicles use low-voltage or data-bus systems
that can be damaged by test lights and logic probes. Test
all circuits with a digital multi-meter before making
connections.
Do not disconnect the battery if the vehicle has an
anti-theft-coded radio, unless you have the radio code.
If installing an external push button switch, check with
the customer about where to install the switch.
To avoid accidental battery drainage turn off the interior
lights or remove the dome light fuse.
Roll down a window to avoid being locked out of the car.
Use of this product in a manner different to its intended
way of operation may result in property damage, personal
injury, or death.
Set Parking brake.
Remove the negative battery cable.
Protect fenders before starting.
Using protective blankets to cover front seats, interior of
the vehicle and center console.
Always install a fuse 6-12 inches away from AXXESS.i
interface, 5 amp fuse should be used.
Always secure AXXESS.i interface with Velcro or double
side tape to prevent rattling of the interface.
When securing AXXESS.i interface make sure that panels
can be closed back easily.
Use electrical tape on all you connections and splices, do
not leave any exposed connections.
Route all wires along factory harnesses, try not to drill or
make any unnecessary holes.
Make sure you are not connecting to any data wires;
always check your connections with a multi-meter.
Always use help of a professional installer to prevent any
damage to the vehicle or AXXESS.i interface.

Especificaciones del producto

Marca: Axxess
Categoría: No categorizado
Modelo: AXI-RGB1

¿Necesitas ayuda?

Si necesitas ayuda con Axxess AXI-RGB1 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Axxess Manuales

No categorizado Manuales

Últimos No categorizado Manuales