Balance 972423 Radio-Controlled Projection Clock Manual de Usario
Lee a continuación 📖 el manual en español para Balance 972423 Radio-Controlled Projection Clock (5 páginas) en la categoría Wekker. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/5
Item 972423
Radio-Controlled Projection Clock with Indoor Temperature Owner’s Manual
Thank you for purchasing the new generation of projection clock. Designed and engineered with the
state-of-art technology and components, this instrument will provide accurate and reliable
radio-controlled time and indoor temperature readings as well as color light bar and projection
features. Read this manual carefully to fully explore the features and functions of the new product.
Name and Functions of Buttons:
Press Functions Hold 3 seconds
SET/ Search for Radio-Controlled time Set Clock & Calendar
ALARM Read alarm time for alarm 1 & 2 Alarm time setting
ALARM Enable/Disable alarm 1 & 2
UP 1 step forward in setting Fast advance in setting
Down 1 step backward in setting Fast backward in setting
MEMORY Read max/min temperatures Clear memory record
SNOOZE/ Trigger snooze alarm, extend backlight
LIGHT & projection
ZONE Toggle RC time & Zone time Zone time setting
C/F Toggle degree C & F unit
RESET System reset
Rotary Knob
FOCUS Adjust focus of projected image
IMAGE ROTATION Rotate projected image
Slide Switch
Continuous Backlight Turn on/off continuous backlight when adapter is connected
Continuous Projection Turn on/off continuous projection when adapter is connected
Light Bar Select “OFF”, “ON” & “ALARM” light bar mode
BATTERY & ADAPTER INSTALLATION
Projection Clock:
Main Power Source: Plug in the 4.5V adapter into the adapter socket at the back casing
** Continuous backlight, projection & light bar only available when adapter is connected
Backup Power: Lift off the battery cover, install 3 pieces of AAA backup batteries according to the
polarity indicated, close the battery cover.
RADIO-CONTROLLED CLOCK
The unit will start synchronizing the clock after battery/adapter installation or reset. In normal mode,
press “SET/ “ in the battery compartment to enforce searching of radio-controlled clock signal. The
antenna icon will appear during synchronization, if the icon disappears afterwards, radio time signal is
not available at the moment. Try other locations later. Place the unit away from source of
interference such as mobile phones, appliances, TV etc.
Antenna icon with full signal strength will appear on screen if the reception of radio-controlled
time is successful. The radio-controlled clock will have a daily synchronization at 02:05 everyday.
Each reception cycle is around 2.5 to 10 minutes.
INDOOR TEMPERATURE
Indoor temperature is located on the top line of the display. Press “C/F“ button to select temperature
unit C/ F.
COLOR LIGHT BAR / NIGHT LIGHT
The color light bar is designed as an intuitive way to know the alarm On/Off status at night. It also
serves as a nightlight.
Light bar slide switch selection:
OFF: Turn off the light bar
ON: Turn on the light bar continuously
ALARM: Light bar turns blue when one of the alarms is set for the next 24 hours
NOTE: Light bar can be activated continuously only when adapter is connected
Especificaciones del producto
| Marca: | Balance |
| Categoría: | Wekker |
| Modelo: | 972423 Radio-Controlled Projection Clock |
¿Necesitas ayuda?
Si necesitas ayuda con Balance 972423 Radio-Controlled Projection Clock haz una pregunta a continuación y otros usuarios te responderán
Wekker Balance Manuales
Balance 972423 Radio-Controlled Projection Clock Manual de Usario
4 Septiembre 2024
3 Septiembre 2024
Wekker Manuales
- Wekker Alecto
- Wekker Ascot
- Wekker Nedis
- Wekker Hama
- Wekker Envivo
- Wekker Auriol
- Wekker Irox
- Wekker Metronic
- Wekker Krontaler
- Wekker La Crosse
- Wekker Multi Care Systems
- Wekker Sempre
- Wekker FlinQ
Últimos Wekker Manuales
7 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
30 Agosto 2024
29 Agosto 2024
27 Agosto 2024
26 Agosto 2024
26 Agosto 2024
22 Agosto 2024
17 Agosto 2024