Bang And Olufsen BeoLab 6002 Manual de Usario

Lee a continuación 📖 el manual en español para Bang And Olufsen BeoLab 6002 (12 páginas) en la categoría Altavoces. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
BeoLab 6002
Guide
WARNING: To reduce the risk of re or
electric shock, do not expose this appliance
to rain or moisture. Do not expose this
equip ment to dripping or splashing and
ensure that no objects lled with liquids,
such as vases, are placed on the equipment.
To completely disconnect this equipment
from the AC Mains, disconnect the mains
plug from the wall socket. The disconnect
device shall remain readily operable.
The lightning ash with arrowhead symbol
within an equilateral triangle, is intended to
alert the user to the presence of un insulated
dangerous voltage” within the product’s
enclosure that may be of sufcient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
main tenance (servicing) instructions in the
literature accompanying the product.
Daily use
When you have finished setting
up the loudspeakers as described
on the following pages, connect
the entire system to the mains
supply. The indicator lights up
in red, indicating that the loud-
speakers are in standby, ready
to be used. The loudspeakers
are designed to be left in this
standby mode when not in use.
Switching on and off –
indicator
When you switch on your Bang &
Olufsen system, the loudspeakers
switch on simultaneously. The red
standby indicator light turns green,
indicating that the loudspeakers
are switched on.
When you switch off your system,
or mute the sound, the red
indicator light appears immediately,
indicating that the loudspeakers are
not in use.
If the loudspeakers are connected
to a non-Bang & Olufsen system,
they switch on when they receive a
signal from the system (refer to p. 6).
They switch off a few minutes after
the signal has disappeared.
Loudspeaker protection
The loudspeakers are equipped
with a thermal protection system
which prevents overheating. If an
error occurs – or the speaker units
become overheated – the system
automatically switches the loud-
speakers to standby, and the
indicator light turns orange.
To restore the situation:
> Disconnect the loudspeakers
from the mains.
> Allow the system time to reset
(approximately 3–5 minutes).
> Reconnect the loudspeakers to
the mains.
Should the problem persist, contact
your Bang & Olufsen retailer.
Cleaning the loudspeaker
Wipe dust off the surfaces using a
dry, soft cloth. If necessary, remove
stains or dirt with a soft, damp
cloth and a solution of water and
mild detergent such as washing-up
liquid.
Never use alcohol or other solvents
to clean any part of the loud-
speakers!
3
NOTE! Prolonged listening at high
volume levels may cause hearing
damages.
Indicator

Especificaciones del producto

Marca: Bang And Olufsen
Categoría: Altavoces
Modelo: BeoLab 6002

¿Necesitas ayuda?

Si necesitas ayuda con Bang And Olufsen BeoLab 6002 haz una pregunta a continuación y otros usuarios te responderán




Altavoces Bang And Olufsen Manuales

Altavoces Manuales

Últimos Altavoces Manuales