Barco R9829997 Manual de Usario

Lee a continuación 📖 el manual en español para Barco R9829997 (16 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
ENABLING BRIGHT OUTCOMES
Installation Manual
TLD+ Zoom Lens Safety Cable
Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
3
When to use the safety cable?
The lens safety cable must be used in any circumstance where the projector is mounted above people. Do this
to secure the mounted lens in the lens holder.
Why replace the existing safety cable?
Up until recently, all lenses for event projectors weighed 7 kg or less. The lens safety cable included with every
events projector was able to secure every single lens available in the Barco gamma.
Due to the release of the TLD+ Ultra 0.8 1.16 lens, there are now lenses available that weigh more than 11
kg, which this safety cable can no longer support in a safe fashion.
In order to safely handle all lenses that are available, a new safety cable must be used, which is installed on
the lens in a new fashion.
Content of the kit
Safety Cable (750 mm, Ø3 mm)
Cable clamp M4
Shackle 7x70 mm
20 x Cable clip (16x16 mm, Ø4 mm)1
R5906099 /03 TLD+ Zoom Lens Safety Cable
The lens safety
cable
1
1: Only four pieces are needed to assemble the safety cable to a lens. When the safety cable is used on another lens, you should not
remove the cable clips. Instead, use four new ones. There are enough cable clips in the kit to secure up to five different lenses.

Especificaciones del producto

Marca: Barco
Categoría: Accesorio para proyector
Modelo: R9829997

¿Necesitas ayuda?

Si necesitas ayuda con Barco R9829997 haz una pregunta a continuación y otros usuarios te responderán




Accesorio para proyector Barco Manuales

Accesorio para proyector Manuales

Últimos Accesorio para proyector Manuales