Unicol PGG Manual de Usario

Unicol Accesorio para proyector PGG

Lee a continuación 📖 el manual en español para Unicol PGG (4 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch
points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring
loaded parts. Before installing, make sure that the supporting surface will support five times the combined
load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all
components to ensure that you have all of the required parts before proceeding (see BOM list on following
page). Use of this product for anything other than its specified use may result in failure or personal
injury. This product is intended for indoor use only. We recommend using a qualified trades person for
installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Revised 05/01/24
01865 767676
sales@unicol.com
www.unicol.com
*Please check model specific details before installing*
PGG / PGL / PGM / PGS / PGW / PGX
Screen Size: Guide Max. Weight: n/a 20kg
2Revised 05/01/24
COMPONENTS
01865 767676
sales@unicol.com
www.unicol.com
INSTALLERS REQUIRED
1
# DESCRIPTION QTY
1Guardbox Body 1
2Locking Plate 1
3Keys for Built-In Lock 2
4Security Bars 3
#TOOLS REQUIRED
14mm & 5mm Allen Keys
2Pozi Head Screwdriver
319mm Spanner
417mm Spanner
3
4
1
2
01865 767676
sales@unicol.com
www.unicol.com
3
Revised 05/01/24
STEP 1
Place projector inside the Guardbox cage. Ensure
that it rests on the two adjustable rail inside the cage.
STEP 2
Drop the security bars into position as shown above.
Make sure that the projector lens is not covered or
restricted by the bars.
STEP 4
Take the locking plate and slide it over the front half
of the top of the Guardbox. This should slide over the
column socket fixings, protecting them from being
tampered with.
Once positioned, use the keys to secure the locking
plate. Take a record of the numbers located on the
keys for replacement purposes.
STEP 3
Before placing the Lcok Slider Plate, place your
ceiling suspension column into the socket. Ensure
that the holes in the column line up with the hole in
the column. Thread the through-bolt through the
hole in the socket and secure.
Next, tighten the grub screws located either side of
the through-bolt hole.

Especificaciones del producto

Marca: Unicol
Categoría: Accesorio para proyector
Modelo: PGG

¿Necesitas ayuda?

Si necesitas ayuda con Unicol PGG haz una pregunta a continuación y otros usuarios te responderán


Accesorio para proyector Unicol Manuales

Unicol

Unicol PGG Manual de Usario

17 Septiembre 2024
Unicol

Unicol PGW Manual de Usario

17 Septiembre 2024

Accesorio para proyector Manuales

Últimos Accesorio para proyector Manuales

Barco

Barco R9853370 Manual de Usario

18 Octubre 2024
Barco

Barco R9861400 Manual de Usario

27 Septiembre 2024
Da-Lite

Da-Lite Project-O-Stand 42068 Manual de Usario

22 Septiembre 2024
My Wall

My Wall HL 41 ML Manual de Usario

17 Septiembre 2024
Speaka

Speaka SP-PWM-200 Manual de Usario

17 Septiembre 2024
Speaka

Speaka SP-PWM-100 Manual de Usario

17 Septiembre 2024
Speaka

Speaka PRB-1 Manual de Usario

17 Septiembre 2024
Roadinger

Roadinger UP-4 QCL Manual de Usario

17 Septiembre 2024
Panasonic

Panasonic ET-D3LEW300 Manual de Usario

17 Septiembre 2024
Sony

Sony LKRM-U331 Manual de Usario

16 Septiembre 2024