Barox PC-INJ-30W-B Manual de Usario

Barox Tarjeta/adaptador de red PC-INJ-30W-B

Lee a continuación 📖 el manual en español para Barox PC-INJ-30W-B (8 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
User Manual
Industrial Injector
PC-INJ-30W
PC-INJ-30W-B
PC-INJ-60W
PC-INJ-60W-B
PC-INJ- -B95
Version 11.2019
2
Introduction
This rugged designed industrial PoE injector is equipped with a 30W/60W/95W PSE port. This
PSE port can be powered by 48-56 VDC input voltage. With its multi-purpose design, it can also
be Din-Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance,
traffic monitoring and security applications in critical environments. It can tolerate -40°C to 75°C
in harsh environments to perform a reliable network. This product has been rigorously tested in
harsh environments for your security, transportation, and telco applications.
Note
Always make sure the total length of the TX cable DOES NOT exceed 100 meters. Total length
is defined as length A + length B.
Length A + Length B < 100 meters
POE signal attenuates every meter, the built-in transformer allows the attenuation to reach 100
meters to follow IEEE802.3af/at standards. The higher quality PD you connect to, the more
reliable the network will be. When connecting to a poor-quality PD, it cannot generate a strong
enough signal for the remote switch. Always make sure you have a high-quality PD to perform
your desired network.
A
B
PD
Remote Switch
3
Installation package
This unit can be din-rail mounted or wall-mounted. Din-rail brackets and -mount brackets are wall
included.
Power connection
This unit provides a 4 pin terminal block. It can be operated using 48-56VDC power source.
Always make sure your input voltage is within this supported voltage range.
To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,
+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a
neutral wire to the ground screw.
+V1- is for power input one connection.
+V2- is for power input two connection.
Power connecting procedure:
STEP 1 – Take out 4 pin terminal block located in
the included mounting kit package.
STEP 2 – Connect power wires to +V1- or +V2-
with corresponding polarity. Connect the
grounding wire to the ground screw.
STEP 3 – Plug into terminal block socket shown
above. Polarity needs to match V+ and V-.
WARNING Always SHUT OFF power source to connect power wire.--
WARNING Any exceeded input voltage will not make this unit function and may --
damage this unit.
+V1- +V2-

Especificaciones del producto

Marca: Barox
Categoría: Tarjeta/adaptador de red
Modelo: PC-INJ-30W-B

¿Necesitas ayuda?

Si necesitas ayuda con Barox PC-INJ-30W-B haz una pregunta a continuación y otros usuarios te responderán


Tarjeta/adaptador de red Barox Manuales

Barox

Barox PC-INJ-30W Manual de Usario

7 Septiembre 2024
Barox

Barox PC-INJ-60W-B Manual de Usario

7 Septiembre 2024
Barox

Barox PC-INJ-30W-B Manual de Usario

7 Septiembre 2024
Barox

Barox PC-INJ-95-B Manual de Usario

7 Septiembre 2024

Tarjeta/adaptador de red Manuales

Últimos Tarjeta/adaptador de red Manuales

Cambium Networks

Cambium Networks CG52A Manual de Usario

26 Octubre 2024
StarTech.com

StarTech.com ST1000SPEXD4T Manual de Usario

22 Octubre 2024
Devolo

Devolo MicroLink dLAN duo Manual de Usario

16 Octubre 2024
Edimax

Edimax HP-5001K Manual de Usario

16 Octubre 2024
LevelOne

LevelOne FNC-0109TX Manual de Usario

14 Octubre 2024
Edimax

Edimax EW-7822ULC Manual de Usario

9 Octubre 2024
ZyXEL

ZyXEL AP Configurator Manual de Usario

6 Octubre 2024
Linksys

Linksys AE1000 Manual de Usario

6 Octubre 2024
Trendnet

Trendnet TEW-624UB Manual de Usario

5 Octubre 2024
Nec

Nec NP06LM Manual de Usario

4 Octubre 2024