Barska AE10824 Manual de Usario
Barska
Telescopio
AE10824
Lee a continuación 📖 el manual en español para Barska AE10824 (1 páginas) en la categoría Telescopio. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/1
ANCHOR MASTER
36 Power, 90080
Telescope
5
HOW TO ASSEMBLE YOUR SCOPE:
Before, you begin to assemble your scope, you will
need
to have a Phillips-head screwdriver and a
Crescent wrench. *NOTE* Please be careful not to
scratch your scope.
1. Place the optical tube and arc mount on its side.
2. Attach the legs of the tripod at the base of the mount.
3. Carefully slide one of the leg attachments shaft through
the top of the attached leg through the holes of the
mount. Make sure that the support tray brackets
are facing up.
4. Gently stand the scope and tripod, slowly spread the
legs of the tripod.
5. With the shining side of the support tray facing up,
screw in its brackets.
Make sure to tighten all screws and nuts. Your scope is
now assembled and ready to be used.
H
OW TO MOUNT THE FINDER SCOPE
1.
A
ttach
the 2 mounting rings to the optical tube with 4
mounting screws.
2. Center the fi nder scope within the mounting rings
using 6 mounting screws
HOW TO USE YOU SCOPE:
Start by loosening the lock and levers and gently guide
the
scope to your desired position.
1. Once it’s at the position that you want, tighten the locks
and levers.
2. Point the objective lens to an object and look through
the eyepiece.
3. With slow and tiny motions, rotate the focus knob
slowly, until your view of the object is sharp and
in focus.
HOW TO TAKE CARE OF YOUR SCOPE:
1. When wiping the lenses, use a soft lens cloth.
2. To remove any remaining dirt or smudges, add
one or two drops of isopropyl alcohol to the cloth,
then wipe gently.
3. Store your scope in a moisture-free area.
Parts included in package:
p g
Optical tube with mount attached 1 unit
Mahogany wood tripod legs 3 units
Acorn nuts 3 pcs
Support tray 1 unit
Washers and bolts 3 sets
Mounting Screws
10 pcs
Mounting Rings
2 pcs
PARTS
1. Optical tube with arc mount attached
2. Mahogany wood tripod
3. Support tray
4. Lock and levers
5. Objective Lens
6. Eyepiece
7. Focus Knob
8
.
Finder Scope
9. Image diagonal
**IMPORTANT**
NEVER ATTEMPT TO CLEAN YOUR SCOPE INTERNALLY OR
TRY TO TAKE IT APART. DO NOT LOOK DIRECTLY AT THE
SUN WITH THE SCOPE AS IT WILL CAUSE DAMAGE TO
YOUR EYE.
Especificaciones del producto
| Marca: | Barska |
| Categoría: | Telescopio |
| Modelo: | AE10824 |
¿Necesitas ayuda?
Si necesitas ayuda con Barska AE10824 haz una pregunta a continuación y otros usuarios te responderán
Telescopio Barska Manuales
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
Telescopio Manuales
- Telescopio Celestron
- Telescopio Bresser
- Telescopio Konig
- Telescopio Orion
- Telescopio Vivitar
- Telescopio Meade
- Telescopio Levenhuk
- Telescopio Vixen
- Telescopio Discovery
- Telescopio Danubia
- Telescopio DayStar Filters
- Telescopio Mizar
- Telescopio Sky-Watcher
- Telescopio National Geographic
- Telescopio IOptron
- Telescopio ZWO
- Telescopio Uniprodo
Últimos Telescopio Manuales
27 Octubre 2024
20 Octubre 2024
20 Octubre 2024
16 Octubre 2024
16 Octubre 2024
16 Octubre 2024
16 Octubre 2024
16 Octubre 2024
Bresser 70-900 - National Geographic 90-71000 Manual de Usario
21 Septiembre 2024
18 Septiembre 2024