Barska BA11403 Manual de Usario

Barska Flash BA11403

Lee a continuación 📖 el manual en español para Barska BA11403 (1 páginas) en la categoría Flash. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

1. Unscrew tail cap of flashlight. Remove battery holder from flashlight.

2. Insert 3 AAA batteries as illustrated. Make sure the negative signs (not included)

of the batteries are on the springs of the battery holder.

3. On the ends of the battery holder there is an indentation of a “+” and “-” sign. Place positive

end of battery holder into the flashlight. Screw tail cap of flashlight back on to flashlight.

· 2 levels of brightness

· Rapid strobe mode

· Zoom function

· Operates on three

AAA batteries

(not included)

- 1” Weaver mounting ring

- Wrist strap

INSTALLING BATTERIES

OPERATION

AAA AA A

AAA

1. To turn flashlight on, press and hold button firmly. You will hear a click.

2. To switch through the various lighting modes gently press the button.

Lighting modes are as follows;

- Flashlight is on: Low Light Mode

- Tap once High Light Mode

- Tap once more Rapid Strobe Mode

3. To turn flashlight off at any of the lighting modes press and hold button firmly. You will hear a

click. Flashlight is now off.

ZOOM

1. Turn flashlight on

2. Hold one end of the flashlight and slowly pull

the other half of the flashlight

MOUNTING FLASHLIGHT

1. With an Allen wrench loosen the top screws of the ring and carefully separate

the top piece of ring from the bottom half.

2. Position the tube of the flashlight in the groove of the bottom half of the ring.

3. Place the top piece of ring with screws over the top of the flashlight and

bottom half of flashlight.

4. With an Allen wrench tighten screws to join the top and bottom halves of the ring together.

Your flashlight is ready to be mounted to a firearm.

5. Loosen the lock nut located on the side of the ring, mount ring with flashlight using the

grooves of the ring to the rail of the firearm and tighten the lock nut in place.

6. To dismantle mounted flashlight, loosen lock nut and remove mounted flashlight from the rail

of firearm. Using an Allen wrench unscrew the screws from the top of the ring and remove

flashlight from ring. Place top half of ring on top of the bottom half of the ring and screw pieces

back together.

Features Includes

WARNING: USE OF FLASHLIGHT FOR AN EXTENSIVE PERIOD OF TIME WILL

CAUSE OVERHEATING. IF OVERHEATING OCCURS, TURN FLASHLIGHT OFF

AND ALLOW IT TO COOL BEFORE RE-USING.

Especificaciones del producto

Marca:	Barska
Categoría:	Flash
Modelo:	BA11403

¿Necesitas ayuda?

Si necesitas ayuda con Barska BA11403 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Flash Barska Manuales

Barska BA11403 Manual de Usario

6 Septiembre 2024

Barska BA12198 Manual de Usario

6 Septiembre 2024

Flash Manuales

Últimos Flash Manuales

Stanley SL5W09 Manual de Usario

17 Octubre 2024

Ledlenser P9R Core LEP Manual de Usario

15 Octubre 2024

LED Lenser P5R Manual de Usario

11 Octubre 2024

Nordride 5110 Spor Smart A Manual de Usario

7 Octubre 2024

Varta 17631 Manual de Usario

7 Octubre 2024

Varta 18803 Manual de Usario

4 Octubre 2024

LED Lenser L5 Manual de Usario

2 Octubre 2024

Black Diamond Ember Manual de Usario

2 Octubre 2024

Brennenstuhl TL 1201 AF Manual de Usario

1 Octubre 2024

Brennenstuhl TL 601 AF Manual de Usario

1 Octubre 2024