BDI Avion 8925 Manual de Usario

BDI mueble de televisión Avion 8925

Lee a continuación 📖 el manual en español para BDI Avion 8925 (4 páginas) en la categoría mueble de televisión. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Your Avion® Home Theater Furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Placement and Maintenance

Avion® Home Theater Furniture is designed for indoor use on level floors.

Clean glass with glass cleaner, and steel parts and wood veneer with a

moist cloth.

Step 1

Unpack and identify the components at left. Note that some components

are shipped inside the cabinet. The assembly workspace should be a non-

marring surface such as carpet. For missing hardware pieces, please

contact BDI Customer Service at customerservice@bdiusa.com. For all

other concerns, please contact your BDI Retailer.

Step 2

Build and Install Base Assembly

First, remove all internal components from the cabinet including shelves,

hardware box and legs. Carefully lay Assembled Cabinet (F) back-side

down. Using the Hollow Bolt Wrench (C), remove the four (4) pre-installed

Hollow Bolts (D) Metal Leg (H).from Screw the Metal Rail (G) to the top

of with Metal Leg (H) Hollow Bolts (D).

Component List

These distinctive product configurations are protected by US and international

patents, trade dress, and/or copyright laws. “Avion” and BDI are trademarks of

Made in China. 102909v289225REV

Av i o n

8925

a s s e m b l y i n s t r u c t i o n s

bdiusa bdiusa.com customerservice@ .com

D - Hollow Bolts x 4

Pre-installed on

Metal Legs (H)

A - Phillips Screwdriver

x 1

C - Hollow Bolt Wrench

x 1

F - Assembled Cabinet

x 1

E - 1/4”-20 x 2”

Machine Screw x 6

G - Metal Rail x 2

I - M4 x 25mm Screws

x 4

J - Handle x 2

K - Adjustable Shelf

x 2

M - Back Panel x 1

H - Metal Leg x 2

B - 4mm Hex Driver

x 2

Completed base assembly

Detail view of Hollow Bolts (D)

connecting the to Metal Rail (G)

the top of .Metal Leg (H)

NOTE: Make sure

that the larger bolt

opening on Metal Rail

(G) faces toward the

floor.

assembly instructions

bdiusa bdiusa.com customerservice@ .com

Step 4

Install on the doors and drawers using theHandles (J) M4 x

25mm Screws (I) Phillips Screwdriver (A) and the supplied.

Step 3

Carefully lay Assembled Cabinet (F) back-side down. Using

one of , attach the completed base 4mm Hex Drivers (B)

assembly to the bottom of the Assembled Cabinet (F) with

1/4”-20 x 2” Machine Screws (E). *Note: Each of the

metal legs has levelers that can be adjusted from inside the

cabinet using one of the 4mm Hex Drivers (B).

Adjustable shelf pins (pre-installed) may be repositioned,

allowing you to raise or lower the adjustable shelf to the

desired level. Install Adjustable Shelf (K) inside the left and

right cabinet area. *Note: To place the adjustable shelf

inside the cabinet, the shelf must be tilted sideways to clear

the door opening.

Completed base

assembly

E x 6

assembly instructions

bdiusa bdiusa.com customerservice@ .com

Step 6

Optional fabric speaker or glass insert panel

Avion’s drawer and door fronts feature removable/replaceable

panel inserts to permit customization of your cabinet’s appearance

and utility. (Contact BDI Customer Service at customerservice@

bdiusa.com)

Installing optional panel inserts is quick and easy:

1. From the inside of the door, and starting at one corner of

the pre-installed Glass or Speaker panel insert, carefully pull away

all four sections of the panel retention trim, running along the

perimeter of the insert. (Use a blunt, tapered object or your finger

to start removing the rubber material.)

2. Once the trim material is completely pulled away, remove the

pre-installed panel insert and replace it with the desired panel

insert.

3. Re-install the trim, pressing it carefully back into the groove

around the new panel insert, section by section, to complete the

panel insert installation.

Step 5

Install both to the backside of the cabinet. Back Panels (M)

*Note: Velcro straps are included as wire management for your

convenience.

a. Remove rubber trim and

glass panel.

b. Replace insert panel

Especificaciones del producto

Marca:	BDI
Categoría:	mueble de televisión
Modelo:	Avion 8925
Peso.:	25000 g
Ancho:	700 mm
Profundidad:	550 mm
Altura (mín.):	1260 mm
Altura (máx.):	1360 mm
Ajustable en altura:	70 mm
Tipo de mecanismo:	Kikkersysteem
El número de ruedas:	5 wiel(en)
Color del marco:	Zwart
Cantidad por paquete:	1 stuk(s)
Material del marco:	Metaal
Material de la rueda:	Nylon
Fondo de color:	Zwart
se requiere ensamblaje:	Ja
Tipo-producto:	Gaming leunstoel
Ruedas:	Ja
Peso máximo del usuario:	150 kg
Soporte de espalda ajustable:	Ja
Reposacabezas:	Ja
Altura del asiento ajustable:	Ja
Diámetro de empuñadura:	60 mm
Plataformas de juego compatibles:	PC
Material básico:	Metaal
tipo de silla:	Gestoffeerde gevoerde zitting
Color del asiento:	Black, Red
Tipo de respaldo:	Gestoffeerde gevoerde rugleuning
Color del respaldo:	Black, Red
Brazo:	Ja
Tipo de reposabrazos:	Gevoerde armleuning
Reposabrazos ajustable:	Ja
Tipo de ajuste del reposabrazos:	4D-armleuning
almohada de apoyo para el cuello:	Ja
Función de giro:	Ja
Incluye volante de carreras/modo vuelo:	Nee
Ancho-del-asiento:	540 mm
Profundidad-del-asiento:	530 mm
Cojín lumbar:	Ja
Altura del asiento (máx.):	480 mm
Altura del asiento (mín.):	410 mm
Material del respaldo:	Faux leather, Foam
Material del asiento:	Faux leather, Foam
ajustes de inclinación:	Ja
Rango de ángulo del respaldo:	90 - 135 °
Clase de elevación de gas:	4
Altura-del-respaldo:	800 mm
Ancho del respaldo:	500 mm
Ancho del reposabrazos:	100 mm
Altura del reposabrazos (mín.):	410 mm
Altura del reposabrazos (máx.):	480 mm
Ascensor de gas (máx.):	80 mm