BDI Centro 6402 Manual de Usario
BDI
Oficina de
Centro 6402
Lee a continuación 📖 el manual en español para BDI Centro 6402 (3 páginas) en la categoría Oficina de. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/3
Product Registration
Registering your new BDI product allows us to send you
important product updates, service information and helpful
hints related to your BDI products. Register today and you will
be entered to win free a BINK table from BDI. www.bdiusa.
com/product-registration/
Placement and Maintenance
Centro™ Office furniture is designed for indoor use on level
floors. Clean glass with glass cleaner, and steel parts and
wood veneer with a moist cloth.
Your Centro™ Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, please contact BDI Customer
Service at customerservice@bdiusa.com. For all other
concerns, please contact your BDI retailer.
T1 4mm Hex Wrench
C1 - Glass Panel x 1
C3 - Leg x 1
C2 - Frame Assembly x 1
H19 Leveler Glide x 2
H6 1/4-20 x 12 mm Screw x 2
H7 1/4-20 x 38 mm Screw x 4
H8 1/4-20 x 61 mm Screw x 4
bdiusa.com
customerservice@bdiusa.com
CENTROTM 6402
RETURN
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in Taiwan. 01.08.2016 V1
H11 Cord Wrap x 3
H12 - Snap Fastener x 3
H13 Bumper x 2
bdiusa.com
customerservice@bdiusa.com
CENTRO 6402
RETURN
2
Step 1 - Glides H10 Leg C3. Leg C3 to Frame Assembly C2 Screws H7.Install to the bottom of Attach with
H10 (x2)
H7 (x4)
Step 2 - BDI Cord Wraps H11 using Snap Fasteners H12 Install into hole locations as shown. Install
Bumpers H13 into holes as shown.
H11 (x3)
C3
H12 (x3)
H13 (x2)
H13
H13
bdiusa.com
customerservice@bdiusa.com
CENTRO 6402
RETURN
3
Step 3 - Remove glass top from the Centro Desk. Position the at the desired end of the Frame Assembly C2
Centro Desk. Attach the return to the desk with Carefully place Screws H6 using Hex Wrench. Glass Panel
C1 on top of return.
Step 4 - Glass Panel C1 Frame Assembly C2 Screws H8 Hex Wrench. Secure to using and Do not over
tighten.
Centro 6401 Desk
(with glass removed)
H6 (x2)
H8 (x4)
Especificaciones del producto
| Marca: | BDI |
| Categoría: | Oficina de |
| Modelo: | Centro 6402 |
¿Necesitas ayuda?
Si necesitas ayuda con BDI Centro 6402 haz una pregunta a continuación y otros usuarios te responderán
Oficina de BDI Manuales
17 Octubre 2024
17 Octubre 2024
10 Octubre 2024
9 Octubre 2024
Oficina de Manuales
Últimos Oficina de Manuales
16 Octubre 2024
15 Octubre 2024
19 Julio 2024
18 Julio 2024
17 Julio 2024