BeamZ BUVW123 Manual de Usario
Lee a continuación 📖 el manual en español para BeamZ BUVW123 (16 páginas) en la categoría Lámpara. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/16
BUVW-Series UV/WW LED BAR
Ref. nr.: 153.500; 153.502
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.1
2
ENGLISH
Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to
benefit fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the product on. Contact your dealer.
Do NOT connect the product to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a -16A fuse. 10
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the product in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the product with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
effect at least 50cm away from inflammable material and
leave at least 1 meter space on every side to ensure
sufficient cooling.
- This product contains high intensity LEDs. Do not look
into the LED light to prevent damage to your eyes.
- Do not repeatedly switch the product on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Only operate the product with clean hands.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualified technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product off prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and fault s!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate
and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35°C/95°F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that e product must be returned to the factory, it is important that the product be returned in the original th
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
INSTALLATION
Attention:
• The installation of the product has to be built and constructed in a way that it can hold 10
times the weight for 1 hour without any harming deformation.
• The installation must always be secured with a secondary safety attachment, e.g. an
appropriate catch net. This secondary safety attachment must be constructed in a way
that no part of the installation can fall down if the main attachment fails.
• Make sure the area below the installation place is free from unwanted persons during
rigging, de-rigging and servicing.
• The operator has to make sure that safety-relating and machi -technical installations are ne
approved by an expert before taking into operation for the first time and after changes
before taking into operation another time.
• The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled
person once a year.
• The fixture should be installed in the position where persons cannot reach and where persons may walk by or be
seated.
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding
can cause greater accumulation of dirt on the unit’s optics.
• Make sure the area below the installation place is free from unwanted persons during servicing
• Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from any deformation
• The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is
detected
• In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be cleaned
monthly.
• The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
• Clean with soft cloth using normal glass cleaning fluid.
• Always dry the parts carefully.
• Clean the external optics at least every month. Clean the internal optics at least every 30/60 days.
CAUTION: Please consider the respective national norms during the
installation! The installation must only be carried out by an
authorized employee or dealers!
CAUTION: When installing the device, make sure there is no highly in
inflammable material (decoration articles, etc.) in between a
distance of min 0.5 meter.
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified worker!
Especificaciones del producto
| Marca: | BeamZ |
| Categoría: | Lámpara |
| Modelo: | BUVW123 |
¿Necesitas ayuda?
Si necesitas ayuda con BeamZ BUVW123 haz una pregunta a continuación y otros usuarios te responderán
Lámpara BeamZ Manuales
23 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
Lámpara Manuales
- Lámpara Sony
- Lámpara Samsung
- Lámpara IKEA
- Lámpara Philips
- Lámpara Honeywell
- Lámpara Canon
- Lámpara Alecto
- Lámpara Ansmann
- Lámpara Silverline
- Lámpara Brennenstuhl
- Lámpara Workzone
- Lámpara BenQ
- Lámpara Ozito
- Lámpara Klarstein
- Lámpara Silvercrest
- Lámpara Nedis
- Lámpara Gembird
- Lámpara Innoliving
- Lámpara Livoo
- Lámpara Stanley
- Lámpara Crivit
- Lámpara Eglo
- Lámpara Lucide
- Lámpara OK
- Lámpara Hilti
- Lámpara Westinghouse
- Lámpara Kodak
- Lámpara Blaupunkt
- Lámpara Metabo
- Lámpara Logik
- Lámpara Trust
- Lámpara Carson
- Lámpara Elro
- Lámpara EMOS
- Lámpara Mesko
- Lámpara Hähnel
- Lámpara Silva
- Lámpara Hazet
- Lámpara Hama
- Lámpara Fenix
- Lámpara Theben
- Lámpara Velleman
- Lámpara Smartwares
- Lámpara Easymaxx
- Lámpara Steren
- Lámpara Hansa
- Lámpara Steinel
- Lámpara Livarno
- Lámpara Sanitas
- Lámpara Petzl
- Lámpara Black Diamond
- Lámpara Craftsman
- Lámpara Digitus
- Lámpara In Lite
- Lámpara Barco
- Lámpara Näve
- Lámpara Godox
- Lámpara Luceplan
- Lámpara Bresser
- Lámpara Olight
- Lámpara Elation
- Lámpara Runtastic
- Lámpara Steinhauer
- Lámpara Topeak
- Lámpara Zuiver
- Lámpara Konig
- Lámpara Chauvet
- Lámpara Flex
- Lámpara X4-Tech
- Lámpara HQ
- Lámpara Nanlite
- Lámpara Profoto
- Lámpara Trio Lighting
- Lámpara Ranex
- Lámpara Globo
- Lámpara Eurolite
- Lámpara August
- Lámpara Paul Neuhaus
- Lámpara Ibiza Sound
- Lámpara Impact
- Lámpara Avidsen
- Lámpara Lume Cube
- Lámpara Konig & Meyer
- Lámpara Ozone
- Lámpara ORNO
- Lámpara Toolcraft
- Lámpara Unilux
- Lámpara Aputure
- Lámpara Brandson
- Lámpara ARRI
- Lámpara Osram
- Lámpara Bolt
- Lámpara Duronic
- Lámpara Dorr
- Lámpara Ledlenser
- Lámpara Honeycomb
- Lámpara Elinchrom
- Lámpara Mission
- Lámpara Paulmann
- Lámpara Vimar
- Lámpara Dedra
- Lámpara Cameo
- Lámpara Kanlux
- Lámpara XQ-Lite
- Lámpara Wetelux
- Lámpara Sagitter
- Lámpara Elgato
- Lámpara Schwaiger
- Lámpara V-Tac
- Lámpara Neo
- Lámpara Gravity
- Lámpara Berger & Schröter
- Lámpara Apa
- Lámpara Prixton
- Lámpara Hatco
- Lámpara Goal Zero
- Lámpara Lutec
- Lámpara Karma
- Lámpara Livarno Lux
- Lámpara Neewer
- Lámpara Zafferano
- Lámpara Lightway
- Lámpara NUVO
- Lámpara Omnilux
- Lámpara Brilliant
- Lámpara Heitronic
- Lámpara NEO Tools
- Lámpara AccuLux
- Lámpara Luxform
- Lámpara Adviti
- Lámpara ArmyTek
- Lámpara Lalumi
- Lámpara Raya
- Lámpara Rotolight
- Lámpara SIGOR
- Lámpara Maxim
- Lámpara Oecolux
- Lámpara Megatron
- Lámpara Integral LED
- Lámpara Casalux
- Lámpara Lowel
- Lámpara Sonoff
- Lámpara Meross
- Lámpara Fabas Luce
- Lámpara Dainolite
- Lámpara Signature Design By Ashley
- Lámpara NightStick
- Lámpara Videx
- Lámpara Kartell
- Lámpara Louis Poulsen
- Lámpara Artecta
- Lámpara Fixpoint
- Lámpara Zadro
- Lámpara Kind LED
- Lámpara Waldmann
- Lámpara Hensel
- Lámpara Altman
- Lámpara Setti+
- Lámpara Jinbei
- Lámpara XCell
- Lámpara Perfect Christmans
- Lámpara Xline
- Lámpara ET2
- Lámpara Quoizel
- Lámpara Golden Lighting
- Lámpara Ridem
- Lámpara Fredrick Ramond
- Lámpara Crystorama
- Lámpara Sonneman
- Lámpara AFX
Últimos Lámpara Manuales
26 Octubre 2024
26 Octubre 2024
25 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024